Free Shipping on Orders Over $109 at Summit Racing

On Sale

AutoMeter Chrono Chrome Series Analog Gauge Kits

AutoMeter Chrono Chrome Series analog gauge kits are convenient, cost-effective, all-in-one solutions. These 5-piece kits include an electric speedometer, fuel, oil, water, and volt gauges with a unique three-dimensional dial design that gives added depth and style to your custom dash. Key features and points: * Short sweep electric fuel level, oil pressure, water temperature, and volt gauges with full sweep electric speedometer * Unique 3-D beveled dials with modern white LED illumination and flush mounted windows * AutoMeter's race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle * 12 and 16 V compatible to work with nearly every street car or race car electrical system * Speedometer has a simple push button, 2-mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination * Speedometer is compatible with most 2-wire sine wave and 3-wire hall effect vehicle speed sensors * Speedometer features lit LCD odometer capable of registering a million miles with two resettable trip odometers

Not Yet Reviewed

$666.99

$600.29

OTC 2-Speed Hydraulic Hand Pumps

OTC 2-speed hydraulic hand pumps are designed with all-metal construction to almost eliminate the chance of leaking, or damage to the pump from regular use or accidents. They are the perfect pumps for use with single-acting rams or combinations where 45 cu. in. of usable oil capacity will do the job. OTC pumps are equipped with all the features you want and need. Features include: * A 2-way valve * Welded steel carrying handle * Automatic switching from low to high pressure mode * Handle effort under 140 lbs. at 10,000 psi * Unique fill cap to prevent over-filling and over-pressurization * Non-vented reservoir * Fingertip control valve with 180 degree throw for on/off control

Not Yet Reviewed

$653.99

VIAIR TLC Boost XL Air Compressors

VIAIR TLC BOOST XL air compressors are a complete solution for mobile shops, support vehicles, RVs—and any enthusiast who enjoys fast tire inflation and performs multiple pneumatic tasks on the go. These fast-filling air source kits feature a 2-gallon tank, a 30 ft. coil hose, a shop-style inflator with rotating Presta and Schrader attachments. and a blow gun. The compressor charges the tank to 150 psi, storing enough air to provide a blast for seating multiple tubeless bicycle tires, performing blowing tasks, running air tools—and it's capable of inflating RV and truck tires up to 35 in. The TLC BOOST XL has an onboard ON/OFF switch and can be easily installed in the vehicle using the SAE terminal ring attachments and mounting hardware included. Additional details: * Shop-style inflator with 160 psi gauge * Fully rebuildable Presta head attachment * 90 degree twist-on Schrader attachment * 30 ft. inside braided coil hose * 2-pin SAE connector attachment with terminal rings * 40 amp inline fuse holder * Deluxe carry bag

Not Yet Reviewed

$689.75

VIAIR TLC Boost Air Source Air Compressors

VIAIR TLC BOOST Air Source air compressors are a complete solution for mobile shops, support vehicles, RVs—and any enthusiast who enjoys fast tire inflation and performs multiple pneumatic tasks on the go. These fast-filling air source kits feature a 1.5 gallon tank, a 30 ft. coil hose, a shop-style inflator with rotating Presta and Schrader attachments, and a blow gun. The compressor charges the tank to 120 psi, storing enough air to provide a blast for seating multiple tubeless bicycle tires, performing blowing tasks, running air tools—and it's capable of inflating RV and truck tires up to 33 in. The TLC BOOST has an onboard ON/OFF switch and can be easily installed in the vehicle using the SAE terminal ring attachments and mounting hardware included. Additional details: * Shop-style inflator with 120 psi gauge * Fully rebuildable Presta head attachment * 90 degree twist-on Schrader attachment * 30 ft. inside braided coil hose * 2-pin SAE connector attachment with terminal rings * 40 amp inline fuse holder * Deluxe carry bag

Not Yet Reviewed

$574.75

Intellitronix 1979-1986 Ford Mustang Digital Direct-Fit Gauge Clusters

Intellitronix LED digital direct-fit gauge kits make it easy to go from analog to digital with your Blue Oval Fox-body. These replacement gauge panel kits come complete with all necessary sending/sensor units and instructions (bezel not included). Plus, you get the cool stuff from modern gauges like 0-60 times, quarter-mile ETs, and high-speed recall, all with the push of a button. The LEDs are available in a variety of colors, including blue, green, red, teal, and white. When you crave crafting excellence and engineering innovation for your modern classic pony car, order the Intellitronix 1979-1986 Ford Mustang digital direct-fit gauge clusters best suited for your application. More product features and specifications include: * All necessary senders (oil, speed, temperature) * Oil pressure display with 0-100 psi range * Speedometer reads up to 255 mph with odometer and trip meter functions all controlled with one-button calibration--regardless of tire size, gear ratio, or transmission * Tachometer features a custom-designed LED bar graph (unit is microprocessor controlled with peak rpm memory recall), automatic night dimming, shift light, and RPM-activated switch that can handle 3 amps * Tachometer reads 0-9,999 rpm in 100-, 10-, or 1-rpm increments (1-rpm maximum reading is 9,999; 10-rpm maximum reading is 9,990; 100-rpm maximum reading is 9,900) and works on engines ranging from 1-cylinder to 12-cylinders * Water temperature display with 100-300 degree F range (ships with 1/2 in. bushing; 3/8 in. bushing available as special order) * Voltmeter display with 10.0-18.0 V range (no sending unit required) * Fuel level displays 0-99 percent range in one percent increments and works with your existing Ford fuel level sending unit * Panel automatically dims at night and includes turn signal, high beam, and brake indicators for added convenience * Compatible with both mechanical and electronic transmissions (GPS speedometer sender offers compatibility with 4,000, 8,000, or 16,000 pulse-per-mile speedometers if desired) * LS and other computer-based engine applications must use provided senders along with factory senders to properly feed computer data and may need the LS engine swap adapter kit (available separately)

Not Yet Reviewed

$507.05

OTC Robinair RG3 Portable Refrigerant Recovery Machines

OTC Robinair RG3 portable refrigerant recovery machines are the new standard in refrigerant recovery. OTC knows all jobs are different—from a rooftop to a marine HVAC system—and the RG3 units are easy to use and ideal for any residential and appliance sized recovery job! Capable of recovering both liquid and vapor refrigerant, they are engineered to withstand the punishment of daily use, even under extreme conditions. RG3 portable refrigerant recovery machine features include: * Easy to operate, rugged case with easy-to-read gauges, comfortable handle and simple two valve controls * Compact and lightweight (40 percent smaller footprint, easy to carry, weighs approximately 18 lbs.) * Oil-less compressor is capable of recovering both liquid and vapor * Handles almost all refrigerants (works with all common CFC, HFC, HCFC refrigerants including R-410A) * High-efficiency cross-flow design; layout of fan and condenser is maximized for shorter cycle times * High-pressure safety shut-off switch automatically shuts-off machine if pressure rises above 550 psi * IEC connector and power cord

5.0 out of 5 stars ( 2 )

$569.99

Ranger E1.2B3F1 Hydraulic Power Units

The Ranger E1.2B3F1 hydraulic power units are a compact tank that offers enough juice to lift a 10,000-lb. truck or SUV. The 1.5 hp motor is powerful enough to handle lifting applications on all of Ranger's low-rise lifts, as well as some of their full-sized lifts. Plus, the single-phase, 50/60 Hz design is super-efficient; when used on a low-rise car lift, your car will be lifted to the lift's max capacity in just 30 seconds. The crowning achievement of the E1.2B3F1's design is the fixed-volume hydraulic circuit with an optimized pressure-sensitive relief valve. When the system pressure exceeds 2,500 psi, the valve opens and allows fluid to bypass rapidly and safely. The valve automatically closes when the pressure levels return to normal. A hydraulic power unit with an optimized relief valve is essential for shops that need to operate heavy loads worry-free. Don't let the lighter tank on the Ranger E1.2B3F1 fool you into thinking this hydraulic power unit is weak. In fact, many prefer smaller tank sizes for one simple reason—they get the job done safely and very efficiently. Features and specifications: * Pumps feature high mechanical and volumetric efficiency, low noise level * End head prepared for lift-hold-lower applications using our standard manual lowering valve or solenoid cartridge valves * Totally enclosed motors are suitable for use in humid environments or dusty, contaminated atmospheres—UL Recognized and CSA Certified * AC electric motors feature heavy-gauge steel frame and base and high-quality ball bearings * Torque load remains constant throughout the range of operation * Power up, gravity down function * Heavy-duty start switches with a high IP-protection class and silver-plated contacts meet tough demands for a long service life * Cartridge-style relief valves meet tough demands for dependability and life expectancy * Equipped with black plastic and steel reservoirs * Vertical mounting * Equipped with oil level dipstick * High performance cartridge check valve is standard * Most premium grade petroleum-based fluids can be used—optimum operating viscosity range is 15-68 centistokes * Minimum recommended temp is -25 degrees C (-1 degrees F) * Maximum recommended temp is +80 degrees C (+175 degrees F)

Not Yet Reviewed

$525.00

AccuAir Suspension Viair 485C Generation 2 Series Dual Air Compressors

AccuAir Suspension Viair 485C Generation 2 Series dual air compressors deliver game-changing performance with an advanced oil-less design that allows less ongoing maintenance, durable stainless steel valves for longevity and performance, and a permanent magnet motor that offers high-efficiency due to lower heat output. If you are looking for a great air compressor for your air suspension ride, the Viair dual 485C kit should be a major consideration. The 485Cs are rated at 100 percent duty at 200 psi and are true 200 psi-rated working pressure pumps. Featuring a newly-developed, sleek head design, these VIAIR compressors have an increased duty cycle and quieter dB levels to make for a more appealing setup in most air suspension setups. AccuAir offers these compressors in a platinum finish equipped with a stainless steel leader hose and an inline check valve. Features: * 485C Platinum compressors with thermal overload protectors * Air filter assemblies * VIAIR removable filter covers * Remote mount brackets and fittings * Spare air filter elements * Leader hose clips * Air line clips with hardware * Nuts, bolts, washers, and lock washers * Heavy-duty tube-style fuse holder (up to 60 amp fuse) * 40 amp relays * Pressure switch (165 psi on, 200 psi off) * Stainless Steel braided leader hoses with inline check valve * Air line for remote mount filter installation

Not Yet Reviewed

$549.95

Shifnoid On-Board Air Compressors

Mounted in your vehicle, a Shifnoid on-board air compressor will replace your CO2 bottle and regulator, meaning you will no longer need to fill and maintaining a bottle. You will be able to run your air shifter, starting line controller, throttle stop, and other CO2/air devices that operate in the range of 90 to 120 psi. Unlike many 12 V compressors on the market, these customized compact units have a 1/4 gallon recovery tank to supply the volume needed to activate many air devices used in racing. Eliminate your CO2 bottle and regulator with Shifnoid on-board air compressors. Contents and features: * Eight outlet ports to connect virtually any device used in racing and off-road * Pre-installed safety valve * Drain cock to eliminate moisture * Oil-less design allows mounting at just about any angle * 90 to 120 psi pressure switch * Recovery time of approximately 4 seconds * 2.30 cfm at 0 lbs., 1.28 cfm at 90 lbs. * 40-amp relay * Cleanable, remote mount air intake * "No kink" polyurethane coiled hose and tire chuck to maintain tire pressure * Quick-connect coupler for coiled air line to fill tires

Not Yet Reviewed

$576.99

Clearance

Classic Instruments 1964-66 Chevy Truck Package Gauge Sets

Classic Instruments 1964-66 Chevy truck package gauge sets feature a speedometer, tachometer, fuel, oil, temperature, and volt gauges, and a 12 V quartz clock in one of four color schemes: black, tan, white, or gray. These direct-fit all-electric clusters with easy snap-in wiring harnesses arrive ready to install directly into the stock dash of 1964-66 trucks; no cutting or alterations are necessary. Even better, they include Classic Instruments' Zeus Speedometer Technology built in, which means no external control boxes. Their truck packages are designed to re-use the factory dash bezel (bezel not included) to maintain the original styling of your vehicle, but they've been upgraded with bright LED lighting for even illumination and clear nighttime readability. Everything else needed to install the package is provided, including a scratch-resistant acrylic lens and all necessary sending units. No need to worry about fuel sending unit compatibility, either; the cluster features a fuel sending unit selector switch to set it for compatibility with the existing/factory fuel sending unit, so no new sending unit necessary. Choose the gauge panel color that best suits your vehicle.

5.0 out of 5 stars ( 2 )

$1,024.99

$717.50

10 Results Found For "oil pressure switch"