Availability
Showing In Stock Items. Show All 16 Items.
Designed and calibrated from Edelbrock for use in marine applications, these Edelbrock carbs comply with U.S. Coast Guard safety standards. Cast surfaces are protected by a Chromate conversion coating which is used as a corrosion inhibitor. Other features include modified bowl venting, specially designed throttle shafts, an accelerator pump seal, a 3/8 in. inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent, a 5 1/8 in. flame arrestor flange, a universal throttle lever, and revised secondaries for improved transient performance. Also included with every Edelbrock carburetor are instructions for installation, set up, and basic tuning.
( 71 )
$621.95
Holley Marine carburetors are designed to meet Coast Guard specifications. Each carburetor's fuel metering system is calibrated to compensate for unique engine loads found on boats and feature J-style vent tubes to direct fuel/fumes back into the carburetor for safe operation while on rough waters. Choose from a large selection with different options, such as single or dual feed fuel inlets, vacuum or mechanical secondaries, and universal or engine specific calibration. Features: * Gold Dichromate finish for corrosion resistance and a classic Holley look * Factory preset electric choke for easy startups * Power valve blow-out protection * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
( 1 )
$679.95
Featuring typical Holley quality, model 2300 marine carburetors include special modifications that make them adaptable and legal for marine use. Primary differences include J-style fuel bowl vent tubes and sealed throttle shafts. In addition, these 2-barrel carbs were designed to meet flooding and backfire requirements set by the U.S. Coast Guard. Other features include an electric choke, 30cc accelerator pumps, single fuel inlets, and a 5 in. airhorn.
Not Yet Reviewed
$682.95
Sierra Marine carburetors are new precision castings built to meet or exceed OEM specifications. They offer several 2- and 4-barrel replacement styles to choose from. Order the model recommended for your watercraft application. Features include: * Recalibrated to maximize fuel efficiency and performance * All carburetors are flow-tested throughout the entire throttle range * Fuel mixture and idle settings are preset to ensure that only minor idle and choke adjustments are necessary during installation
( 40 )
$695.99
—
$788.99
To ensure smooth, positive response from your watercraft fuel system, Quick Fuel Technology introduces Black Diamond Marine Series carburetors. The proper blend of air and fuel is critical when you're cruising miles from shore, and the innovative team at QFT has engineered carbs for every street and race application imaginable. Trust their expertise for your boat needs, as well. Depending on the Marine Series carburetor model selected, you can choose single or dual fuel inlets, vacuum or mechanical secondary, primary and secondary jet sizes, and inner and outer air bleed sizes. Quick Fuel Black Diamond Marine Series carburetors feature: * Aluminum fuel bowls with sight glass windows for quick float adjustment * Changeable idle air and high-speed bleeds * PTFE-coated throttle shafts with PTFE bearing ribbons and stainless steel plates * J tubes to prevent spillage * Black Diamond high-temperature satin coating on main body and fuel bowls for enhanced corrosion protection and appearance; coating also provides a 6 percent reduction in fuel temperature * 4-corner idle adjustment (except M-600) * Billet metering blocks with changeable primary idle feed and power valve channel restrictions (except M-600)
( 15 )
$749.95
Holley Marine Avenger carburetors feature all-aluminum construction with a gray hardcoat anodized finish for corrosion resistance and tough style. They're J1223 marine certified, have PTFE coated throttle shafts, and come available in different sizes to match your boat's needs. Holley recognizes and calibrates for the unique loads that boats endure and uses 4-corner adjustments through dual metering blocks. Quickly get to your favorite fishing hole with Holley Marine Avenger carburetors.
( 20 )
$626.95
—
$749.95
Sierra Marine remanufactured carburetors are reworked with precision to meet or exceed OEM specifications. They offer several styles to choose from. Features include: * Recalibrated and re-engineered to maximize fuel efficiency and performance * All carburetors are flow-tested throughout the entire throttle range * Fuel mixture and idle settings are preset to ensure that only minor idle and choke adjustments are necessary during installation * All bases are resurfaced and throttle shaft bushings replaced
Not Yet Reviewed
$672.99
You'll notice a definite difference in power with AED Marine Series carburetors. They're hand-built and calibrated for marine use to specifications for a balanced fuel curve. Featuring AED custom billet marine metering blocks, the carbs are test-run and blueprinted for maximum performance, right out of the box. You'll like the improved throttle response and crisp revs. If you're picky about how your boat runs (and looks), go with AED HO-Series.
Not Yet Reviewed
$689.95
—
$759.95
AED HB-Series blower carburetors are designed specifically for roots-style blower applications. They feature billet metering blocks, boost referenced power valves, wet flow technology, fully machined conventional main bodies for additional signal strength and response providing exceptional acceleration. All AED HB-Series blower carburetors are blueprinted and tested for maximum performance right out of the box.
( 5 )
$759.95
Designed with street and bracket racers in mind, AED HO-Series carburetors offer crisp throttle response, great drivability, and killer acceleration. These carbs feature CNC-machined and deburred main body surfaces, high-flow boosters and metering blocks, four corner idle, a milled choke horn, dual accelerator pumps and vacuum ports, and non-stick, reusable gaskets. All AED carburetors are tested and tuned before shipping, employing their state-of-the-art, planet-leading, computerized "wet-flow bench." They'll provide you with properly matched and balanced fuel delivery and a controlled metering signal and strength, no matter what your speed. HO-Series carburetors are available for aspirated engines, alcohol, blower, and marine applications. AED HO-Series carburetors unite "off-the-shelf" high performance with an affordable price.
( 66 )
$729.95
BOOSTane Marine Octane Booster offers the ability to increase octane levels up to 116 and is specially formulated to complement marine engines. It provides all the advantages of BOOSTane Professional and can help owners concerned with phase separation of their fuel. BOOSTane's Marine formula is the team getting back to its roots. The original, innovative formula was designed for demand in the offshore powerboat racing arena. With BOOSTane Professional at its core, Marine still has the proprietary carrier and octane enhancing capabilities that separated itself from the competition. However, focusing on issues that are more pertinent to marine engines—such as fuel stability and lubrication—BOOSTane Marine's formula gives the added protection that these increasingly higher performance engines need. Too many OEM companies require octane higher than what is available at the marina, and are still susceptible to the negative side effects of ethanol. Take full advantage of your summers on the water and let BOOSTane restore your boat's full potential. Turn the pump gas in your boat or PWF tank to a high performance race fuel equivalent! Additional notes: * Increased lubricity for engine internals, valves, and seats * Ethanol stabilization for prolonged storage with fuel still in tank * Will raise your effective octane fuel number 23 numbers * Don't get stuck with 90 octane at the marina again * Use the BOOSTane App to blend exactly to your necessary specifications * Safe for use with catalytic converters and oxygen sensors * Won't settle out of solution and become ineffective in your tank, due to our proprietary carriers * Protect against phase separation and water in your tank from prolonged storage and ethanol * Works in all internal combustion engines, from powerboats and high performance fishing boats to personal watercraft and leisure * Naturally aspirated or forced induction, your peace of mind is here * LOWER Compression Engines and 2 Stroke * Proprietary chelated carrier * Anti-corrosion against ethanol * Cleaning agents * Anti-carbon buildup * Not street legal * Available individually or in larger quantities
Not Yet Reviewed
$594.49
Summit Bucks
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$540.95
These 360 degree Weiand X-CELerator single plane manifolds make their power in the 1,500 to 6,800 rpm range, which makes them the ultimate manifolds for high-performance street, drag, marine, and Oval Track engines. The carburetor mounting pad is designed to accept all current aftermarket performance carburetors, and includes an open-style plenum for increased flow. Best suited to engines equipped with aggressive camshafts, headers, and high-output ignitions, these intakes are sure to put a smile on your face.
( 11 )
$525.95
For maximum performance in normally aspirated competition applications, Weiand Hi-Ram Tunnel Ram intake manifolds are the manifold of choice. They're designed primarily for drag racing, truck/tractor pulls, and performance marine applications where high rpm is required but bottom-end torque isn't. With their patented D-shaped port runners and large plenum chamber, the manifolds provide optimum thrust of the air/fuel mixture to the intake ports. They mount either single or dual square-mount carbs and, depending on the application, have power bands that run from 2,500 rpm to as high as 9,000 rpm. Separate tops and runners are available for some manifolds. Order the model recommended for your year/make, engine, and cylinder head application.
( 27 )
$699.95
Speed-Pro forged pistons are made from extruded VMS-75 aluminum alloy that's forged under 3,000 tons of pressure to "near-net" shape. After that, they're machined to their final configuration. These pistons offer excellent strength and durability—and are capable of taking the punishment that's dished out on the street and in competition. They're available for a wide variety of applications, including OE replacements and all-out racing engines.
( 70 )
$608.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
