Availability
Showing In Stock Items. Show All 972 Items.
Level 7 Motorsports' Direct Fit Enthusiast Series brake line plumbing kits offer a more budget-friendly option over their original chassis plumbing kit without sacrificing fitment and quality. These lines feature zinc-coated steel ends and standard vinyl-wrapped line clamps. Developed specifically for the popular 1967-87 Pro Touring Chevy C10 trucks, short bed and long bed styles, as well as Blazer/Jimmy, the kits are designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look on your classic vehicle. The lines in these Level 7 kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they're covered with a special PVC coated material for maximum durability against debris and abrasion. The hoses are all DOT-approved and are all crimped by the manufacturer. Included in each kit are the hoses from the Wilwood master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Select the kit designed for your vehicle. Additional details: * DOT approved hose kit to plumb your factory 1967-87 C10 chassis, as well as for select year Blazer/Jimmy models * PTFE hoses, stainless reinforced, and silicone coated * Black in color * Select kits may include adapters, depending on your application, so stock front and rear hoses can be used Notes: Brake calipers hoses and rear axle plumbing are not included. Front caliper outlet is relocated to the front of the subframe as opposed to the stock location behind the subframe. This keeps the front caliper hoses from binding.
Not Yet Reviewed
$537.99
—
$583.99
Original steel lines can rust from exposure to moisture and corrosive road treatments. Dorman's stainless steel fuel line sets make a great replacement solution, as they resist rust and corrosion—and with their preformed section design will save on installation time. Order the application to fit your needs.
( 27 )
$569.99
DeWitts Radiator oil cooler line kits include an oil adapter block, GM oil seal, metric bolts, and a 1/8 in. NPT plug. They are designed to bolt directly onto any LS series engine and provide two large -10 AN connections. The adapter has a port for the factory temperature sender and an auxiliary port for other needs. These installation kits also everything needed for hooking up an aftermarket internal oil cooler on your C5 Corvette and the LS-based engines listed in the Applications section.
( 1 )
$519.99
Don't ruin excellent engine modifications by putting a new bend in old fuel lines. Fleece Performance high-pressure fuel lines are OEM-quality, look great, and come with M14 x 1.5 fittings. Use them for straight lines, and get one of our quality benders (not included) for perfect angles and a professional appearance. Fleece 8mm high-pressure fuel lines are available in lengths ranging from 7 in. to 24 in.
Not Yet Reviewed
$569.00
COBB Tuning Subaru fuel rail line kits are incredibly robust. Offering 2,500 psi operating pressure and greater than 10,000 psi burst pressure, these kits allow for increased fuel capacity and consistent performance at each injector. Designed to be used along with COBB fuel rail kits, all lines are pre-assembled with double-swivel sport crimp-style hose ends; and the stainless reinforced PTFE line with black covering has a 3 in. minimum bend radius—which allows for a straightforward installation when used as intended. Upgrade your Subaru's fuel system with COBB fuel rail line kits, so you can take advantage of airflow modifications such as intakes, exhausts, or turbochargers.
Not Yet Reviewed
$595.00
Gotta Show Products A/C hose kits are the real deal when it comes to plumbing the air conditioning system in your hot rod, classic, truck, or custom build. They deliver 100 percent stainless steel construction—not plated—and are ready to polish. All fittings are female O-ring formed, making them compatible with any aftermarket A/C system. These cut-to-fit kits may include hoses, drier fittings, condenser fittings, and bulkhead or evaporator fittings. From the firewall forward, complete your A/C system with Gotta Show hose kits.
( 1 )
$534.99
—
$726.99
MagnaFuel ProTuner 750 Series inline fuel pumps feature quiet operation, which makes them ideal for street or performance use. They can support 2,000 hp and up, while offering continuous-duty use. Additional features: * No pump shaft seals * CNC-machined, hard-anodized aircraft aluminum * High-torque custom motor with low current draw * Double support bearing * Can be mounted vertically or horizontally * Polymer wear plates for quiet, smooth operation * 14 amps at 45 psi * -8 AN inlet and outlet (fittings are sold separately)
( 26 )
$529.99
—
$575.99
B-G Racing string line kits are the easiest and most accurate way to achieve 4-wheel alignment. The frames are fully adjustable to allow fitment to a variety of cars—and attach to the vehicle using the hooking feet, which are interchangeable with all of the tubes in the kit. The string bars have a number of pre-machined grooves for the strings to locate in, and a pair of extension bars, making the B-G string lines suitable to cars of different widths. These kits can be used in conjunction with HUB stands, B-G's Clubman race scales, and scale pad leveling trays to achieve the ultimate vehicle setup. Additional features and details include: * Front and rear multi-adjustable boss units manufactured from high-grade mild steel with a durable gray powdercoat finish * Hooking feet manufactured from high-grade mild steel with a polyurethane coating * Tubes (silver zinc plated) in various lengths * Machined aluminum string bars with anodize coating * Plastic string line reels
( 13 )
$569.00
Cooling Components offers Slim Line electric fans for a wide range of vehicles. These replacement fan/shroud combos will lower engine operating temperatures to help prevent your car from overheating. Added benefits include conserving horsepower and increasing fuel mileage. Constructed of high-impact ABS material, the pull-type 12 V units are adjustable in height and width to ensure a secure installation. Most have a 2,500 cfm flow range. Notes: * Requires the use of a 70 amp or larger relay * Some models include brackets * Relay and fan control sold separately
( 13 )
$513.00
—
$682.50
For a simple solution to air conditioning installation, consider Vintage Air underdash systems. These easy-to-install units are engineered with a matched blower motor and blower wheel to provide greater cooling capacity and air delivery—keeping your special ride or daily driver comfortable. Vintage Air underdash units are available in Slim Line models with built-in control knobs, as well as Mini Slim Line models with underdash control pods. Slim Line units offer heating, cooling, and defrost; heating and cooling; or cooling-only systems. The Mini versions offer heating and cooling or cooling-only systems. Choose which underdash system fits your application and enjoy a totally cool—or warm—ride from Vintage Air.
( 2 )
$522.99
MSD Atomic EFI fuel return line kits are designed to allow you to run a return line with your MSD Atomic EFI system. They include a high-pressure regulator, 15 ft. of 3/8 in. fuel line, and the required fittings for assembly.
( 15 )
$549.95
Billet Specialties Redline Race Series wheels are engineered for the street or the strip, with a modern style that's packed with performance. Their forged 6061 T-6 aluminum centers deliver superior strength and lighter weight, while the spun 606 barrels offer ultimate run out and weight savings. Machined serrations at the bead seat provide improved tire-to-rim grip, reducing tire spin. Redline wheels feature 10 split-spokes with a crossover appearance, a large center hub designed for exposed lugs, and a black anodized finish. Billet Specialties Redline Race Series wheels are tested to SFI 15.1 certification and SAE J2530 specifications, ensuring a strong, safe wheel. Select the Redline wheels in the size and fitment specs ideal for your vehicle.
( 1 )
$595.00
—
$614.00
UWS Crossover Series slim line toolboxes are designed for trucks with extremely limited space in front of the wheel well. They feature a patented RigidCore lid design and enhanced aluminum construction. The lids are filled with solid foam that strengthens them against bending or warping, and they have self-opening mechanisms for convenient operation. Their lower profile offers a better view out your rear window; and each box is equipped with two stainless steel paddle lock lift handles. UWS Crossover slim line tub-style toolboxes are built with extra-thick, one-piece aluminum to be strong and highly resistant to corrosion; plus, they permit convenient operation from either side of the vehicle. They are available in a variety of sizes with bright aluminum or black powdercoat finish.
Not Yet Reviewed
$530.95
—
$656.95
AFCO Racing universal performance line radiators are made of 100 percent TIG-welded aluminum and feature two rows of 1 in. diameter tubes. These universal performance line radiators can be easily adapted to cool multiple applications. They offer the same great quality and performance you have come to expect from AFCO—but at a more affordable price for the budget-minded racer. Order the radiator model best suited to meet your needs.
( 2 )
$515.99
—
$609.99
UWS Crossover Series slim line deep toolboxes offer full size features, but in a slim design to utilize the limited space in front of the wheel well. They're ideal for shorter bed trucks! The insulated, beveled, single lid opens a full 90 degrees with the help of super-duty lift cylinders, which raise the lid and hold it open as you load and unload your gear. The built-in tool tray provides additional storage for smaller items. MicroSeal stripping seals out moisture, dust, and dirt. The Crossover Series is available in bright aluminum diamond tread or durable powdercoated steel to fit your needs and truck style!
Not Yet Reviewed
$648.95
Go Rhino RB30 Slim Line running boards are the third edition of the legendary RB Series. RB30 is the next generation of Raptor-inspired design that will make your truck, Jeep, Bronco, or SUV stand out from the crowd. With their aggressive, stylish appearance, these cab-length, bolt-on side steps provide maximum traction and feature an open flow-through design that prevents mud, ice, and snow from accumulating. The Slim Line running boards offer the same heavy-duty toughness as the original-width RB30, but with a slimmer design that fits tighter along the cab for increased ground clearance when off-roading. RB30 Slim Lines are 5 in. wide for most of their length before they taper (compared to 7 in. wide for the original width). The corrosion-resistant 16-gauge steel steps mount tightly to factory mounting points along the lower rocker panel—and they're strong enough to support 300 lbs. per stepping surface for 600 lbs. per board. All RB Series running boards are offered with a textured black powdercoat or protective bedliner finish. RB30s are available with the running boards only, or with mounting bracket kits included. Order the length and options preferred for your vehicle.
Not Yet Reviewed
$509.99
—
$664.99
UWS Crossover Series slim line low-profile toolboxes are the tried-and-true American way of keeping your tools organized, on-hand, and fully secure—no matter where you and your truck roam. Each toolbox is built from extra-thick aluminum welded into a single-piece tub. This provides the toolbox with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. These toolboxes feature a slim-line design, providing adequate clearance for truck beds that have extremely limited space between the wheel wells and truck cab. To add even more strength to the crossover truck toolbox, the lid features UWS's patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid can open to a full 90 degrees, providing a better way to store your tools.
Not Yet Reviewed
$656.95
Dewalt green line and spot laser combo kits help ensure that you have the right tool for a wide variety of jobs, from electrical and plumbing to framing and roofing. These lasers come in a rugged TSTAK case that will keep them secure while storing or transporting. The spot laser is great for lighting, running pipe, or steel track, while the green line laser is ideal for laying tile, framing, or cabinet installation. Key features: * Green beam for enhanced visibility and range * Cross line and 3-Spot included * Full Time pulse mode for use with a detector * Integrated magnetic bracket * Thread mount 1/4 in.-20 for tripod use * Touch pad control panel * Overmolded housing * Batteries, drop ceiling bracket, enhancement glasses, target card, and case are included.
Not Yet Reviewed
$570.00
Milwaukee M12 green cross line and plumb point lasers provide you with all day runtime and best visibility in its class. Get 15 plus hours of continuous runtime with an M12 REDLITHIUM 3.0 CP battery for ultimate productivity. The high-intensity green laser offers you superior visibility up to 125 ft. for long-range applications. The vertical and horizontal lines make alignment and level applications easy, while the two plumb dots allow for quick transfers from floor to ceiling. The integrated magnetic bracket features micro control and pivots on the plumb point for easy and fast alignment. The amplified rare earth magnets provide a strong hold and will not slide on steel studs, while an integrated hang hole makes setup easy and efficient in any environment. Milwaukee M12 lasers are available as tool only or in kits with battery, charger, responsive laser alignment target, and carrying case. Features: * 15 hours plus of run time * 165 ft. range with detector * 125 ft. working range * Accuracy with plus or minus 1/8 in. at 33 ft. * Self-leveling with plus or minus 4 degrees of tilt * 1-meter impact resistance
Not Yet Reviewed
$529.00
Dewalt green cross line laser levels are great for various applications from framing a house to remodeling jobs. The locking pendulum and overmold housing allows for drop protection, which is a major concern on most jobsites. Dewalt green cross line laser levels are equipped with a magnetic bracket and hang hole allow for various mounting options. Features: * Green beam for visibility * 55 ft. range * 1/4 in. accuracy at 30 ft. * IP54 rating * 1 m drop rating * Magnetic bracket and hang hole for various mounting options * 1/4 in. thread for tripod attachment * Locking pendulum for drop pendulum * Overmold housing for drop protection * AA battery operated (not included)
Not Yet Reviewed
$549.00
—
$599.00
The cool people at Vintage Air not only offer the systems, but also the crimping tools to help make your install a breeze. From barb-type tools to standard aluminum beadlock crimpers to Hydra Crimp hydraulic crimpers, Vintage Air lends a hand with these pro-quality crimping tools for your refrigeration lines. Install your lines the right way with the right tools from Vintage Air.
( 3 )
$670.99
S.U.R.&R. deluxe air conditioning line repair kits are designed to make instant repairs to A/C lines on hundreds of vehicles. They will repair various damage rubber and aluminum lines, such as pinholes, cracks, kinks, and more. The new connections can be made easily, with no specialty tools required. These kits cover most line sizes. Kits include: * 3/8 in. A/C compression union * 1/2 in. A/C compression union * 5/8 in. A/C compression union * 3/4 in. A/C compression union * Two -6 AN hose to 3/8 in. compression unions * Two -8 AN hose to 1/2 in. compression unions * Two -10 AN hose to 5/8 in. compression unions * Two -12 AN hose to 3/4 in. compression unions * -6 AN hose to 90 degree 3/8 in. compression union * -8 AN hose to 90 degree 1/2 in. compression union * -10 AN hose to 90 degree 5/8 in. compression union * -12 AN hose to 90 degree 3/4 in. compression union * -6 AN hose to -6 AN hose inline splicer * -8 AN hose to -8 AN hose inline splicer * -10 AN hose to -10 AN hose inline splicer * -12 AN hose to -12 AN hose inline splicer * 5 ft. of -6 AN rubber A/C hose * 5 ft. of -8 AN rubber A/C hose * 5 ft. of -10 AN rubber A/C hose * 5 ft. of -12 AN rubber A/C hose * -6 AN clamp holders (5) and clamps (10) * -8 AN clamp holders (5) and clamps (10) * -10 AN clamp holders (5) and clamps (10) * -12 AN clamps holders (5) and clamps (10) * 360 degree seal clamp pliers * Tube and hose cutter
Not Yet Reviewed
$514.99
On Sale
Tuning has never been easier! DiabloSport Pulsar in-line computers that connect directly to your vehicle's PCM, eliminating unnecessary wires in the engine compartment. By connecting directly to the PCM, Pulsar computers have the ability to control the vehicles signals to optimize performance gains, throttle response, MDS controls, mileage, and more. To make things even better, each DiabloSport Pulsar offers 8 performance levels that are changed by using the vehicle cruise control and buttons on the steering wheel. Power levels are displayed where the gear indicator shows on the dash. Adjustable power levels on-the-fly improves economy, towing capabilities, and performance.
( 1 )
$749.95
$673.95
Aeromotive A1000 brushless in-line fuel pumps let you upgrade to a fixed-speed, premium unit for faster, more dependable, and uninterrupted fuel delivery--with less power consumption and potential for wear or failure. Utilizing the latest brushless motor technology, these pumps are built for sustained pressure (up to 65 psi) with 90 psi maximum potential. They feature a bedrock-solid roller vane design that primes easily, reduces friction, and improves efficiency. Producing more torque per watt and a higher torque-to-weight ratio, brushless motors deliver less noise, lighter weight, and more reliability. With a higher level of efficiency (down to fractions of a second in design speed control) Aeromotive A1000 brushless fuel pumps provide precise control of fuel pump RPM as pressure rises—better maintaining operation and flow, while producing a flatter flow curve. These tight tolerances result in less current draw, less heat, and extended life. More product features, items, and specifications include: * Extended service life in ethanol and methanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Inlet and outlet ORB-10 ports * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Rated flow of 700 lbs./hr. at 45 psi, 13.5 volts for EFI engines * Rated flow of 900 lbs./hr. at 9 psi, 13.5 volts for carbureted engines * Fuel Injected gas engines rated up to 1,300 HP (naturally aspirated) and up to 1,000 HP (forced air induction) * Carbureted gas engines rated up to 1,500 HP (naturally aspirated) and up to 1,200 HP (forced air induction) * Fuel Injected E85 engines rated up to 910 HP (naturally aspirated) and up to 700 HP (forced air induction) * Carbureted E85 engines rated up to 1,050 HP (naturally aspirated) and up to 840 HP (forced air induction) * Ideal for blow-through carbureted engines up to 1,200 FWHP
( 1 )
$694.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
