Free Shipping on Orders Over $109 at Summit Racing

On Sale

MSD Pro-Billet HEI Distributors

The MSD Pro-Billet HEI distributors pick up where the originals left off. Drawing on years of high-performance ignition experience, MSD engineers created a unique ignition module and internal coil that are capable of running above 9,000 rpm. Stock and other aftermarket modules lose spark energy at about 4,500 rpm. These modules produce 50 percent more current than stock units, and deliver a much more precise timing signal as well as more dwell control. The coil delivers over 100 millijoules of energy across the plug gap. For strength and high rpm stability, the QPQ-treated oversized shaft is guided by a sealed ball bearing on top and long sintered bushing at the bottom. The QPQ coating provides a low-friction coating on the shaft and also makes it highly resistant to corrosion. TIG welded to the top of the shaft is an adjustable mechanical advance assembly. The distributors are supplied with extra springs and stop bushings, so you can tailor an ignition curve to match your driving needs. The advance assembly features chromoly weights that slide on nylon pads for smooth timing advancement through the entire rpm range. There is also a vacuum advance canister to improve economy while cruising. All of these features are enclosed in a great looking, billet aluminum housing that is CNC-machined for accuracy and incredible strength. The distributors come complete and ready to drop in with a high-quality rotor and cap with brass terminals for great spark transfer. Simply connect a 12 V source to the distributor and you're up and running. They're designed to replace GM HEI distributors that use a 4-pin ignition module.

4.63 out of 5 stars ( 38 )

$665.95

—

$716.95

$598.95

—

$644.95

On Sale

MSD Super HEI Kits

MSD Super HEI kits solve the common problem of power loss and a lack of response above 4,500 rpm. Different kits are available with all of them allowing you to remove or bypass the low-powered HEI module and coil and replace them with an MSD 6A or 6AL ignition control and Blaster 2 high output coil. The results are more power, an increased rpm range, easier starting, and better mileage and performance. The Super HEI conversion fits all GM V8 engines with the GM HEI internal coil distributor. The complete Super HEI kits include an MSD 6A ignition, Blaster 2 coil, coil wire, HEI dust cover, and coil bracket. The HEI II kits are identical to the standard kits, except that they come with a 6AL ignition. The 6AL has Soft Touch Rev Control to protect your engine from overrevving.

4.71 out of 5 stars ( 24 )

$562.95

$505.95

PerTronix Flame-Thrower Race HEI Distributors

Flame-Thrower Race HEI distributors from PerTronix produce 42 percent more energy in the coil, with 46 percent faster spark breakdown time. This allows 48 percent more peak current to reach the spark plug, compared to their Street/Strip HEI distributors. That's an enormous improvement over stock HEIs and most aftermarket HEI distributors. A specially designed vacuum lockout mechanism prevents timing adjustments that change rotor phasing, adversely affecting the burn time and efficient fuel combustion. The rotor plates are TIG-welded to the mechanical advance mechanism, preventing high-rpm distortion and improving mechanical reliability. Each distributor uses a new aluminum housing cast and is machined from a strong, but lightweight A384 alloy. They're supplied with a high-dielectric strength cap with solid brass terminals, a balanced rotor, and a low-resistance center coil brush. Also included are nylon rotor hold-down screws and a factory-installed, high performance mechanical curve kit with precision-machined weights and a center plate. A hardened, machined steel gear is standard, along with an electronic module and coil combination that excels in the 6,000 to 8,500 rpm range. These distributors are great for both Circle Track and drag race applications where factory-type HEI distributors are mandated.

3.78 out of 5 stars ( 9 )

$526.25

On Sale

Holley Sniper EFI HyperSpark Distributors

Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.

4.24 out of 5 stars ( 127 )

$649.95

$505.95

—

$649.95

On Sale

Holley Sniper HyperSpark Ready to Run Small Cap Distributors

Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation

3.5 out of 5 stars ( 2 )

$562.95

$505.95

—

$562.95

Chevrolet Performance HEI Distributors

These Chevrolet Performance HEI distributors feature precision-milled, cast aluminum housing with vacuum and mechanical advance curves. Suitable for use with most high performance applications, these distributors include a melonized steel distributor gear for use with steel roller lifter camshafts.

Not Yet Reviewed

$500.99

Davis Unified Ignition Ford Street/Strip D.U.I. Distributors

Davis United Ignition Ford Street/Strip D.U.I. distributors are performance replacements for your daily driver, street rod, or off-road vehicle. Rated at up to 7,000 rpm, these simple all-in-one ignition systems have the coil inside the cap and the module inside of the distributor; drop them in, run one 12 V wire, and you're off with 50,000 V of pure spark energy! The high-voltage coil allows for wider spark plug gaps, while the increased dwell in the D.U.I. Dyna-Module produces a hotter spark to deliver the most complete burn of your fuel mixture. Street/Strip D.U.I. distributors are tuned for several Ford motor applications, creating a super-smooth advance curve and eliminating engine damage. They're built tough with oil-impregnated upper and lower bronze bushings for shaft stability, accurate trigger signals, and years of trouble-free service. D.U.I. caps are offered in red, yellow, black, blue, and clear—so you can watch the sparks fly! Give your ride more power, crisper throttle response, and more low-end torque with a Ford Street/Strip D.U.I. (Davis Unified Ignition) distributor from Performance Distributors.

4.46 out of 5 stars ( 79 )

$509.00

—

$525.00

Davis Unified Ignition International D.U.I. Distributors

International Scout owners, your day is here! Davis Unified Ignition now offers International D.U.I. distributors--compact, one-piece ignition systems--for your International V8 and 4-cylinder engines. These D.U.I. distributors are designed to be virtually water, mud, and vibration-proof, with the electronic components protected inside of the distributors. And setup is easy--run one 12 V hot wire to the D.U.I.s, and you are ready to go! A tach hookup is also provided. They feature a 50,000 V coil and a high-output Dyna Module that work together to produce a longer duration spark, allowing the spark plug gaps to be opened up to a whopping .055 in. The larger spark plug gap burns the fuel mixture more completely, giving you more power. A hotter spark also keeps your plugs cleaner longer. Every D.U.I. is hand-assembled to exact tolerances--there is no mass-production. The units are calibrated on a distributor machine with a super-smooth advance curve, providing you with instant throttle response and more power, while eliminating damaging detonation. There will be no trial and error for you--the advance curve is already dialed in. Built for durability, they have both an upper and lower oil-impregnated bushing and include a heavy-duty cap and rotor with solid brass terminals in your choice of red, black, blue, yellow, or clear. Install added performance for your Scout with Performance Distributors International D.U.I. distributors.

4.59 out of 5 stars ( 17 )

$529.00

—

$535.00

Davis Unified Ignition Marine Performance D.U.I. Distributors

Ahoy! If you're looking for a simple, powerful solution for high performance boating, then these Davis Unified Ignition marine D.U.I. distributors from Performance Distributors are the answer. These virtually waterproof and vibration-proof distributors are easy drop-in units with one-wire hookup. There are no wiring hazards to leave you adrift and no hassles! The electronic Dyna-Module and high-voltage coil are built inside of the distributors and produce a longer spark duration, allowing you to widen your plug gap and get a more complete fuel burn. Marine D.U.I. distributors are available in performance versions that crank up to 7,000 rpm and racing versions at 10,000 rpm. D.U.I. distributors are calibrated by machine to dial-in the smoothest advance curve for your application. They are hand-assembled, polished, lubed, and checked for exact tolerances, and the housings are drilled with flame arrestor holes. All of these features allow you to navigate with instant throttle response and more power. Whether you're taking a leisurely ride around the lakes, offshore cruising, or running the waves, anchor your boat with high performance marine D.U.I. distributors from Performance Distributors.

4.79 out of 5 stars ( 73 )

$565.00

Davis Unified Ignition Land Rover D.U.I. Distributors

Land Rover and Range Rover owners, rejoice! Your high performance needs are being met with Davis Unified Ignition Land Rover D.U.I. distributors. Finally, there are distributors designed to improve fuel mileage, horsepower, and torque with 50,000 V of pure energy. They are complete ignition systems in a simple unit that is virtually water, mud, and vibration-proof with a Dyna-Module and high-volt coil located inside of the distributor. This energy combo allows you to open the gap on your plugs for a longer-duration spark and the most complete combustion of fuel mixture possible for a difference in power that you can feel! With a Sun distributor machine and information about the vehicle and engine, Performance Distributors dial-in an advance curve that will provide instant throttle response and more power throughout the rpm range without any pre-detonation. Hand-built to exact tolerances, these distributors feature both upper and lower oil-impregnated bronze bushings for shaft stability, accurate trigger signals, and years of trouble-free operation. Your Rover can now enjoy the high performance of D.U.I. distributors from Performance Distributors.

5.0 out of 5 stars ( 1 )

$699.00

Davis Unified Ignition GM Street/Strip D.U.I. Distributors

Gain serious firepower with GM Street/Strip D.U.I. distributors from Performance Distributors. These fire sticks have everything you need for your ignition in one simple, but strong unit. They offer an easy, one-wire hookup--no external coils or spark boxes, just one 12 V hot wire hookup for 50,000 V of pure spark energy and a cleaner, crisper, more powerful-running engine. Their Dyna-Module, along with the high-voltage coil, allows spark plug gaps to be opened up, increased dwell for longer-duration spark, and the most complete combustion of your fuel mixture for increased horsepower and torque. Plus, the caps have brass terminals for optimum conductivity and are available in several colors, including clear, so you can see the firepower at work. Feel the power; experience Performance Distributors GM Street/Strip D.U.I. distributors.

4.59 out of 5 stars ( 146 )

$749.00

On Sale

MSD Pro-Billet Ready-to-Run Distributors

MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.

4.33 out of 5 stars ( 331 )

$819.95

$505.95

—

$749.95

On Sale

MSD Pro-Billet Dual Sync EFI Distributors

MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability

3.82 out of 5 stars ( 17 )

$599.95

$505.95

—

$599.95

On Sale

MSD Pro-Billet Ready-to-Run EFI Distributors

MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.

4.27 out of 5 stars ( 93 )

$562.95

—

$649.95

$505.95

—

$583.95

On Sale

Holley EFI Dual-Sync Distributors

Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes

3.35 out of 5 stars ( 37 )

$716.95

$505.95

—

$665.95

On Sale

Holley Sniper EFI Low Profile SBF Dual Sync Distributors

Specifically designed for use with the Holley 8.2 in. SBF Hi-Ram intake manifold, these EFI low-profile SBF Dual Sync distributors share all the same great features of other Holley EFI Dual Sync distributors. The design includes dual Hall effect sensors for the crankshaft and camshaft signals. They can be used as just a crank speed input, as well as providing a cam sync signal for a sequential fueling operation—or to provide the needed crank and cam signals for coil-on-plug applications. The precision-machined shutter wheel design ensures accurate timing, even at very high engine speeds. Holley Sniper EFI low-profile SBF Dual Sync distributors also provide compatibility with other EFI systems that support Hall effect crank and cam sensors. Product features include: * Plug-and-play with Holley EFI * CNC-machined billet aluminum housing * Integrated LEDs allow for easy setup * Hardened steel distributor gear

5.0 out of 5 stars ( 1 )

$562.95

$505.95

On Sale

MSD Pro-Billet Ready-to-Run Marine Distributors

MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.

4.13 out of 5 stars ( 16 )

$819.95

$644.95

—

$736.95

Davis Unified Ignition AMC Street/Strip D.U.I. Distributors

Performance Distributors has built D.U.I. distributors for AMC engine owners. Whether you're on the street, off-road, or racing, AMC Street/Strip D.U.I. distributors are ready with 50,000 V of pure energy. The combination high performance coil and Dyna-Module allows you to open up the plug gap for a powerful explosion of fuel mixture and extended dwell time to produce a hotter spark. A better spark means more power, a cleaner burn, and cleaner spark plugs. These one-piece drop-in units eliminate all the wiring of stock systems so that your engine compartment is cleaner, too! They are water, mud, and vibration-proof. Plus, they're built tough with two bushings for shaft stability, and all key pieces are polished and lubed, as they are hand-assembled. All distributors are curved by machine to eliminate pre-detonation and provide instant throttle response. D.U.I. distributors crank up to 7,000 rpm. No matter what type of driving you do, Performance Distributors have AMC D.U.I. distributors to suit your application.

4.64 out of 5 stars ( 67 )

$565.00

FAST Dual-Sync Billet Distributors

These FAST dual-sync billet distributors are an easy, drop-in, plug-and-play solution for fully sequential high performance V8 electronic fuel injection engine applications. They feature reluctors and pickups that have been properly aligned right out of the box, so you don't have to set crankshaft reference angles or phasing in the rotor prior to installation. The FAST dual-sync billet distributors have housings that are CNC-machined from high-quality 6061-T6 billet aluminum and include adjustable slip collars to ensure perfect cam gear alignment. Using high-output magnetic pickups to generate high-capacity, noise-resistant, discrete switching signals for the FAST XFI ECU, they offer extremely precise ignition timing and long life. Deliver strong, powerful energy to your spark plug wires with one of these FAST dual-sync billet distributors.

4.0 out of 5 stars ( 28 )

$501.95

—

$545.95

19 Results Found For "hei ignition module"