Availability
Showing In Stock Items. Show All 35 Items.
At the "heart" of any performance vehicle is the exhaust system. Hooker Blackheart LS swap exhaust systems are engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality. These Blackheart LS systems are offered in three different configurations, and bolt-up directly to existing Hooker Blackheart mid-length headers (sold separately) for a hassle-free installation with an impressive sound sure to turn heads! Features and benefits include: * Constructed from lightweight, 18-gauge, mandrel-bent 409 stainless steel for maximum strength and durability * Dual 409 stainless steel high-flow, straight-through muffler design * Available in three different configurations: Dual 3 in. inlet/single 3 in. out, dual 3 in. with turndowns, or dual 3 in. inlet/dual 2.5 in. out (rear exit) * 100 percent quality hand-welded construction for strength, longevity, and good looks * Designed for use with other Blackheart S10/Sonoma LS swap products * Utilizes OEM mounting points for factory-like fitment * Tube geometry designed for maximum clearance and hassle-free installation * All hardware included
( 1 )
$699.95
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 69 )
$676.99
—
$714.99
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 246 )
$514.95
—
$573.95
Holley GM Gen-V LT engine swap oil pans are designed for LT engine swap installations in classic car and truck chassis' requiring more oil pan to chassis clearance around the front half of the oil pan. GM's new Gen V LT direct injected engines are starting to find their way into a large variety of vehicles. They make great power and are very durable and reliable. Unfortunately, the factory oil pans don't always fit or they hang too low for today's hot rods. The solution? Holley's GM Gen-V LT swap engine oil pans! They will provide maximum clearance to the chassis and ground, plus, they provide an OE-style fitment for durability and proper sealing. Features: * These oil pans are perfect for: 1967-1992 Camaro/Firebird, 1968-1974 Nova/Apollo/Ventura/Omega, 1978-1987 G-body, 1964-1972 A-body, and 1973-1987 Chevy/GMC Full Size Trucks * Designed to provide more oil pan to chassis clearance around front half of the oil pan * Allows for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-Body oil pan can be used * Provides OE-style fitment—OE oil filter mounting, OE oil cooler port provision, OE engine NVH suppression, OE flange gasket and sealing, proper structural rigidity, and OE bell-housing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provides maximum clearance for vehicles where the steering linkage is behind the engine cross-member * Oil cooler port provision * Cast and machined aluminum * 1/2 in. NPT port—ideal for Turbo oil return or PCV oil return * Optional hinge door baffle (available separately) * Complete kit includes: windage tray, sump baffle, OE-style pick-up tube, sump port plug, oil filter stud, billet oil passage cover, etc.
( 2 )
$516.95
—
$549.95
LS Classic Series distributor and plug wire sets are the perfect way to top-off your vintage appearing LS swap. LS Classic Series starts with a set of high-quality 7mm Kevlar® spiral core spark plug wires with high-temp silicone pre-installed 90 degree coil boots and straight unterminated spark plug boots. The wires are 9 ft. long with 40 ohms of resistance per ft., giving you all the length and performance you need to remote mount your coils—so they're out of sight and out of mind. The plug wires first connect to the coils and then pass into the hollow cast-aluminum distributor body that is bolted to the engine's valley plate. The wires continue on to the spark plugs through the distributor for an authentic nostalgic look. Top-off your vintage appearing LS swap perfectly with one of these distributor and plug wire sets by LS Classic. Note: These distributors are designed to bolt to the back two bolts of LS Classic valley pans and will not clear valley plates with raised ribs or oil pressure sender bosses.
Not Yet Reviewed
$724.95
Manufacturer Rebate
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 699 )
$781.40
—
$788.85
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 219 )
$949.95
$522.95
Patriot Tight Tuck headers provide the solution to many problems associated with engine swaps in modern street rods. They fit in the tightest of engine compartments, and they clear most stock motor mounts. Many Tight Tucks are manufactured from durable 16-gauge tubing and come complete with gaskets, header bolts, and collector reducers. Besides their popular finishes, Patriot also offers a chrome option that is polished before and after assembly for show-quality appearance, as well as a stainless steel option. Order the model designed for your vehicle and engine application. Patriot Tight Tuck finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 63 )
$533.65
—
$689.60
RHS LS cathedral port sheet metal intake manifolds provide race-developed technology for the street. They offer great aesthetics often associated with high-budget race engines. These fabricated manifolds are the perfect way to complete your engine—from each high-strength and durable TIG weld to the clean sheet metal bends and contoured runners. They don't just look good; they will help your engine achieve peak potential. Features of RHS LS cathedral port sheet metal intake manifolds include: * Black anodizing with a textured finish * Scalloped fuel rails further set this intake apart * Excellent performance in high-rpm naturally aspirated engines, as well as boosted applications * Big plenum, short runner design optimal performance * High-quality, durable construction ensures great fitment and reliability * 3mm thick aluminum construction resists flexing * Tested to over 25 psi of boost * Includes billet aluminum fuel rails, fittings, hardware, and gaskets
Not Yet Reviewed
$649.95
Patriot's popular 1955-57 Chevy passenger car headers for small block, big block, and LS1/LS6 swaps offer superior performance and fit. These headers feature durable 18-gauge tubing, accommodate the GM 605 power steering box conversion, and fit most motor mounts. Their extra ground clearance makes "slammed" cars drivable and above-frame rail exhaust system installation easy. Patriot Tri-5 headers come with gaskets, header bolts, and collector reducers. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects the headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection. * Raw steel is available for individual customizing
( 127 )
$529.95
—
$700.25
For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.
( 93 )
$569.99
—
$725.99
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 258 )
$561.95
—
$625.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$1,049.95
$558.95
—
$649.95
QA1's tubular K-member for the 1982-1992 Chevrolet Camaro/Pontiac Firebird (F-body) is a significant front-end upgrade. Designed for reduced weight and increased clearance for headers and oil pans, QA1's K-members make a great upgrade for both street performance and track vehicles. QA1's engineers prioritized superior strength when designing these K-member components which reinforces the front-end unibody structure while optimizing weight savings. Unlike other K-members that lock you into a single setup, QA1 K-members offer unmatched versatility with their modular engine mounts (sold separately) that let you switch between engines and transmissions without needing a new K-member. No other K-member offers this level of adaptability, making QA1 the ultimate choice for a seamless build. The K-members offer the flexibility to be used with either coilover struts or QA1 spring sliders, depending on your performance goals. Coilover struts, like QA1's adjustable Proma Star Struts, can also provide a significant performance boost for your 3rd Gen Camaro or Firebird with the ability dial-in the perfect ride height. For those looking to achieve the perfect stance with greater negative camber, while accommodating wider wheels and tires, inboard spring sliders by QA1 are another great option. The inboard spring slider option also helps to maintain spring loads near the factory position on the QA1 K-member. Features and benefits: * Steel suspension subframe crossmember * High-strength design with powdercoat finish * The unique design of QA1's K-members allows the use of interchangeable engine mounts (sold separately) for easy engine swaps—choose from modular engine mounts (sold separately) that either allow you to reuse your existing small block engine and transmission combination or swap to a big block Chevy, or more modern LS and Gen V LT * Substantial weight savings—shedding 32 lbs. while increasing clearance and enhancing accessibility to the front of your car, this is an ideal upgrade! * Compatible with QA1' spring sliders or QA1's coilover struts (sold separately) * You can make your driveline swap even easier by using QA1's transmission crossmembers and torque arms (both sold separately) * Bolt-in installation—QA1's commitment to thoughtful product design is evident in their fully bolt-in kits, providing an easy installation process Fitment Notes: Must use QA1 lower control arms (sold separately). Not compatible with factory coil springs. Must use QA1 coilover struts or QA1 spring slider kit (both sold separately). Engine mounts sold separately.
Not Yet Reviewed
$699.95
Enhance your classic 1968 GM A-body with Intellitronix analog gauge panels featuring a sleek black finish that creates a striking and unforgettable dash for your vehicle. These masterpieces seamlessly blend the classic charm of your Chevelle with modern technology. Designed for easy installation, they are must-haves for any GM "little horse" enthusiast aiming to give their ride a contemporary touch. Essential features include a speedometer, tachometer (4-, 6-, or 8-cylinder engines), fuel level, voltmeter, oil pressure gauge, and water temperature gauge. The panel also includes turn signal indicators and a high beam indicator for added convenience. When you crave crafting excellence and engineering innovation for your classic A-body, order the Intellitronix 1968 Chevy Chevelle direct-fit analog gauge kit best suited for your application. More product features and specifications include: * Compatible with both mechanical and electronic transmissions (GPS speedometer sender available separately or included under different part number; S9020 suffixes) * Automatic nighttime dimming * Maximum speedometer reading is 160 mph * Other speedometer functions include odometer, trip meter, high-speed recall, 0-60 time, and 1/4-mile elapsed time * Voltmeter displays voltage readings from 10.0 to 18.0 volts * Oil pressure gauge measures from 0-100 psi * Tachometer covers a range from 0 to 8,000 in 100 rpm increments * Water temperature gauge reads from 100-260 degrees F * Fuel level is customizable to work with Ford, GM, Chrysler, VDO, and aftermarket 240-33 ohm industry standard fuel senders and reads Empty to Full in 1/4 increments * All necessary sending units for oil (S8434), speed (S9024), and temperature (S8013) * Mounting kit and detailed instructions (no bezel) * Models with GPS speedometer sending unit offer compatibility with 4,000, 8,000, or 16,000 pulse-per-mile speedometers if desired * LS and other computer-based engine applications must use provided senders along with factory senders to properly feed computer data and may need the LS engine swap adapter kit (available separately)
Not Yet Reviewed
$716.83
—
$793.05
PRW Pro Series shaft-mount rocker arm kits are comprised of components from the finest manufacturers in the world. CNC machined billet steel pedestals, ground steel alloy rocker shafts, PRW alloy steel fasteners, and studs and bolts are included in the complete kits for a professional install. Each rocker body is relieved for extra valve spring clearance and anodized for added strength. Choose the kit designed for your vehicle.
Not Yet Reviewed
$775.05
For a strong, streetable setup without the weight of stock, add UMI Performance adjustable lower front A-arms and lose 8 lbs. on the front of your 1993-2002 GM F-body. What you gain are added strength and increased performance. These adjustable A-arms are built strong using DOM steel tubing, 3/16 in. thick CNC-machined shock mounts, new ball joints, high-quality chromoly spherical PTFE-lined rod ends, and greasable polyurethane bushings.Or the chromoly version uses 1.250" x 0.095" 4130 chromoly tubing, maintaining strength and reducing product weight by an additional 2 lbs, 10 lb total reduction. They're finished in your choice of durable red or black powdercoating. Whatever your application, race car or daily driver, UMI Performance 1993-2002 GM F-body adjustable lower front A-arms can handle your setup and lighten your load.
( 2 )
$634.52
—
$699.99
UMI Performance drag specific front lower A-arm kits for 1993-2002 GM F-Body models are designed to help shed weight while still providing plenty of strength. These race-worthy lower A-arms save 5 lbs. per side and accept most major brands of racing coilovers with the 1/2 in. x 1 in. wide mount. There are provisions for a travel limiting chain and also an optional sway bar tab for street use. Strong CrMo tube construction and UMI's newly redesigned tube configuration ensures performance and safety—whether you're landing a wheel stand or powering through the traps at 160+. These A-arms come assembled with premium ball joints, race quality rod ends and arrive to you ready to bolt-on to the vehicle. Product features: * Direct bolt-in for 1993-2002 GM F-body vehicles * 10 lbs. of weight savings * Strong yet lightweight CrMo construction * Can be combined with UMI upper adjustable arms to achieve 6-8+ degrees caster * Uses racing industry standard 1/2 in. shock mount, up to 1 1/4 in. wide * Maintains factory track width * Heavy-duty double reinforced ball joint cup * Race quality rod ends including high misalignment rod end on rear strut * Sway bar mount installed. Use optional sway bar end link (P/N 2649) * Limiter chain mount installed * Factory ball joint installed * Optional A-arm hardware kit (P/N 2301) includes Grade 10.9 bolts, washers, and Ny-lock nuts—everything needed to mount A-arms Note: Not for use with T-bar lower. Requires 1/2 in. diameter racing lower with bearing only.
Not Yet Reviewed
$699.99
UMI Performance 1993-2002 GM F-body road race competition front lower A-arm kits provide a rock-solid foundation for your autocross, road race or corner carving 4th Gen. These heavy-duty boxed lower A-arms have dual rod ends and are fully gusseted box tubing construction that combines strength with a five pound weight savings per set over factory lower A-arms. Shock mounting is a double shear with a 1/2 in. dia. x 1 1/4 in. width racing coilover mount—suitable for most racing coilover systems. Revised ball joint location adds a nominal 2 degrees caster increase. These arms have double shear sway bar mount tabs with end link set included and are designed to work with the factory K-member, UMI K-members, and virtually all aftermarket K-members. Whether it's at the race track or for an added improvement to your daily driver, UMI Performance has A-arm kits designed to outperform the stock setup. Product features: * Construction 0.120 in. wall mild steel box tubing * Available in durable red or black powdercoat finishes * 1/2 in. diameter x 1 1/4 in. width racing coilover mount * 5 lbs. lighter than factory A-arms * Double shear sway bar mount with end link set included * Nominal 2 degree caster increase potential * Double gusset design for flex-free operation * TIG-welded 4140 CrMo threaded tube adapters * Premium ball joints installed * Race quality high misalignment rod end on vertical mount * CNC machined ball joint cups, tubing radiuses and mounting plates * Uses OEM hardware or UMI hardware kit that includes Grade 10.9 bolts, washers, and lock nuts Note: Not for use with T-bar lower. Requires 1/2 in. diameter racing lower with bearing only.
Not Yet Reviewed
$749.99
UMI Performance 1993-2002 GM F-body road race front lower A-arms kits will provide a rock-solid foundation for your road race, autocross, or corner carving 4th Gen. The front lower A-arms fully gusseted box tubing construction, while appearing robust, affords a five pound weight savings per set over factory lower A-arms. The tube adapters for mounting rod ends are crafted from 4140 CrMo steel to enhance thread durability and guarantee years of trouble-free use. These A-arms have double shear sway bar mount tabs with end link set and are designed to work with factory K-members, UMI K-members, and most aftermarket K-members. Product features: * Construction 0.120 in. wall mild steel box tubing * Available in durable red or black powdercoat finishes * 1/2 in. diameter x 1 1/4 in. width racing coilover mount * 5 lbs. lighter than factory A-arms * Double shear sway bar mount with end link set included * Pedestal mount fits DeCarbon, Koni, Bilstein and aftermarket GM T-bars * Nominal 2 degree caster increase potential * Double gusset design for flex-free operation * TIG-welded 4140 CrMo threaded tube adapters * Premium ball joints installed * Race quality high misalignment rod end on vertical mount * CNC machined ball joint cups, tubing radiuses and mounting plates * Lower A-arms use OEM hardware or UMI hardware kit that includes Grade 10.9 bolts, washers, and lock nuts
Not Yet Reviewed
$749.99
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 200 )
$541.95
Dorman magnetic ride control shocks are direct-fit replacements for vehicles equipped with this premium option. What makes the unique technology possible? Tiny magnetic particles in the special fluid change its viscosity when an electrical charge is applied to the magnet in the shock body. The strength in the magnetic field can be adjusted 1,000 times per second to respond instantly to changing performance demands—far more quickly than conventional shocks. These shocks offer an uncompromising mix of ride comfort and active performance. Dorman replacements use the same patented technology as your OE shocks, right down to the same magnetic fluid, at a fraction of what the dealer charges. Installation is as easy as replacing any other shock absorbers, requiring no additional programming or setup. Order the model recommended for fitment on your vehicle application.
( 4 )
$513.99
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 17 )
$749.99
On Sale
Brothers Trucks offers replacement fenders for a variety of applications, including many Chevy and GMC models from the 1940s, '50s, '60s, and '70s. If you're in the process of restoring or repairing your classic pickup, you may find yourself looking at a wrinkled or rusted out fender. Rather than costly and time-consuming body repair, why not replace it with a brand new premium fender from Brothers? These fenders are manufactured with high-quality tools, resulting in excellent looks and fitment. They're constructed with thick, OE-gauge steel and then EDP coated to provide high strength and corrosion protection. Product features: * Available separately for the left and right side * Includes all factory mounting points for an easy installation * Stamped from high quality tools for a precise fit and appearance
Not Yet Reviewed
$599.95
—
$749.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
