Free Shipping on Orders Over $125 at Summit Racing

Biondo DDI 1049 ELITE Mega Panels

Biondo Racing DDI 1049 ELITE Mega switch panels bring you the same performance and reliability of the original Mega Panel with the addition of Biondo's NEW Elite Relay Board! The main differences between a standard panel and an Elite panel are: * Relays have been upgraded * The Elite Board can shift an electric or air solenoid * The Elite Board can handle 40 amps compared to standards 20 amps. The sleek and compact Switch Panel is the main part of the system and includes 6 labeled switches to control your car's most important functions. * The unique starter button and premium grade switches combine a new age design with functionality. * The ignition and fuel pump switches are dual position switches, while the fan/water pump, headlight/taillight, and aux 1/aux 2 are all three position switches. It is made to easily fit into a dragster's dash, with the overall size similar to the overall size of the conventional switch panel. * To simplify the wiring process, the Switch Panel plugs into the Elite Relay Board using the supplied heavy duty 8 ft. cable. The Elite Relay Board is the "power distribution board" and was built with durability in mind. It's capable of handling a 100 amp load with the supplied 6-gauge wire that connects from the high current connector on the Board to the master cutoff switch. It also includes dedicated relays for each switch, with each relay including its own status indicator light to let you know which circuit is on, and a dedicated fuse assigned to it. The Elite Relay Board can handle up to 40 amps on any output. In the very unlikely event that even more current is required, two outputs can be connected together for up to 80 amps. It also features an unswitched fused 12 V output that can handle up to 40 amps. This output is also shut down when the panic button is pressed. (The panic/emergency post on the board allows you to directly connect a "panic button" which will quickly shut off the power to the car in case of an emergency.) The Elite Relay Power Board has a Shift Output Controller that is only active when the ignition switch is on. The Shift Output Controller allows the driver to select whether to shift on time or RPM using a remotely mounted Select Switch (usually mounted on the dash). The Elite Relay Board also has three slide switches. An Output Control Switch to control whether the shift output will apply 12 V (N.O.) to shift or remove 12 V (N.C.) to shift and two Input Selector Switches used to tell the Elite Relay Board whether 12 V or ground is coming from the Shift Controllers. The relay board also includes the "Dual Select" feature which allows you to individually customize how to control each of the three position switches. For example; the switch on the Mega Panel labeled FAN / Water Pump turns on the fan and water pump in one position and the water pump in the other position. By turning on the Dual Select dip switch located on the relay board, you can change it so that the fan only is on in the fan position and the water pump only is on in the other position. The wiring kit includes enough color-coded wire, connectors, wire ties and a complete color-coded diagram to help you neatly wire a vehicle. Features / Specifications: * Mega Panel size: 8 in. x 3 1/4 in. x 1 3/4 in. * Panel mounting holes 7 1/2 in. left to right, 2 3/4 in. top to bottom * Relay Board size: 8 1/2 in. x 5 in. x 1 in. * Complete color-coded wiring kit with connectors and color-coded diagram professionally wire your race car for years of trouble free racing.

Not Yet Reviewed

$728.99

Painless Performance Trail Rocker Jeep JK Accessory Control Systems

Painless Performance Trail Rocker Jeep JK accessory control systems allow you to control up to eight accessories on your Jeep. They feature a waterproof housing that surrounds the power center with eight fuses and relays. Controlling that unit are five pre-wired switches mounted in your custom dashboard panel for a clean, factory look. The power center provides you with all necessary weatherproof connectors and wiring to control your Jeep accessories--from lights to air lockers.

3.71 out of 5 stars ( 7 )

$524.99

—

$574.99

Painless Performance Trail Rocker Jeep TJ Accessory Control Systems

Painless Performance Trail Rocker Jeep TJ accessory control systems allow you to control up to eight accessories on your TJ Jeep! The heart of this kit is enclosed in the weatherproof housing that surrounds the power center with eight fuses and relays. Controlling it are eight prewired switches mounted in a Painless custom switch panel that mounts on your dash. The power center then provides you with all the necessary weatherproof connectors and wiring to connect to your Jeep accessories ranging from lights to air lockers. They are easy to install with detailed instructions and plug-and-play design. Features: * Control up to eight accessories, (8) 30 amp fuses and (8) 30 amp relays * Weatherproof housing around the power center and connections * Custom bolt-on powdercoated bracket for the power center * Switch panel mounts eight LED switches in a factory non-intrusive dash location

Not Yet Reviewed

$544.99

Diode Dynamics D-Switch Hubs

Take your vehicle's setup to the next level with the Diode Dynamics D-Switch hubs. These advanced 8-channel switch panels give you full, customized control over any 12 V accessory that you want to wire up. They replace traditional, fixed-switch panels with customizable, app-controlled, or physical switching, enabling multiple outputs, strobe patterns, and high-current management in a rugged, IP67-rated unit. Key features and benefits: * Extreme durability—the hub features a fully encapsulated design with a cast aluminum heat sink, making it IP67-rated for water and dust resistance, essential for harsh off-road environments * Solid-State reliability—with no mechanical relays to fail or fuses to replace, the solid-state design improves longevity and performance. * Customization and flexibility—users can program different behaviors for the same light (e.g., one button for full power, another for strobe) * Intelligent features—Night Mode for automatic backlighting adjustment and allows for setting up complex scenarios for accessories * Centralized control—allows users to consolidate power management for up to eight separate 12 V accessories (e.g., lights, air compressors, fans) into one system, reducing under-dash wiring clutter * Dynamic channel assignment—the D-Switch is not hard-wired (1-to-1); any button can control any combination of outputs, allowing users to group multiple devices (e.g., ditch lights + bar + rock lights) to one button * App-Based customization—a Bluetooth app enables users to name channels, customize button icons, set strobe patterns, dim lighting, and monitor total power draw * Advanced features include specialized functions like dedicated backlight control, integration with factory trigger wires, and strobe/flash options for lighting, perfect for chase lights * Easy installation—includes necessary wiring, a swiveling mount for the 8-button panel, and a 3-year manufacturer warranty for peace of mind

Not Yet Reviewed

$599.95

—

$709.95

American Autowire Classic Update Series Wiring Harness Kits

American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location

4.7 out of 5 stars ( 571 )

$556.31

—

$732.96

ARC Flat Touch Switch Panels

ARC has designed these Flat Touch switch panels with no electronic parts, making them unaffected by EMI and RFI interference. They are available in your choice of 4, 8, or 12-switch configurations and utilize the newest technology in components rated at up to 1 billion cycles. The ARC Flat Touch switch panels feature 40 amp relays, and each switch has an internal selector to allow for on/off or momentary switching. Included with the switch panels are a variety of race words that allow you to tailor the switches to your specific vehicle. The unique backlit design lights up red when the switches are off and then changes to light green when in use. With their weatherproof design, the ARC Flat Touch switch panels are ideal for open-cockpit applications. They also have a simple jumper connection that selects either 12 V or 16 V operation. Weighing in at under .5 lbs., the ARC Flat Touch switch panels provide weight savings, making them an excellent choice for your race car.

4.95 out of 5 stars ( 85 )

$518.99

—

$741.99

Painless Performance GMC/Chevy Truck Harnesses

Nothing could make re-wiring your Chevy/GMC truck any easier than Painless Performance harnesses. By adding a factory-style bulkhead connector and additional GM connectors, Painless made their universal harness a custom fit for these popular 2x4 and 4x4 GMC/Chevy pickups. These harnesses will work on pickups, Blazers and Suburbans. Includes circuits for: * Air conditioning * Heat * Camper cover lights * Cigarette lighter * Four wheel drive switch * Backup lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn (relay) * Ignition coil * Instrument panel lighting and gauges * Park lights * Power antenna * Power door locks * Power windows * Radio/clock (constant and switched) * Starting * Taillights * Third brake lights * Turn signals * Wipers and washer pump

4.72 out of 5 stars ( 43 )

$635.99

Painless Performance 10-Circuit Race Only Switch and Harness Wiring Kits

Painless Performance 10-circuit race only switch and harness kits feature a relay for each fused circuit and 6 switch contour rocker panel to control it. Each wire is pneumatically terminated and pre-inserted into the fuse block and relay blocks. The fuse blocks are labeled for each circuit and are painted black and silkscreened for easy identification of switch functions. The panels can be roll bar or dash mounted. The harness wires are oversized and custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 * Accessory #2 * Electric fuel pump #1 * Electric fuel pump #2 * Fan relay activation power * Fused power source * Headlights * Ignition coil * Starting * Taillights

4.5 out of 5 stars ( 2 )

$529.99

American Autowire Highway 15 Plus Wiring Harness Kits

American Autowire Highway 15 Plus wiring harness kits are built upon the legendary Highway 15 Series harnesses. The goal of the Highway 15 Plus wiring harness kits is to preserve the same feel as the original, with some modernization and ease-of-use improvements for both backyard and professional builders. Below are the new features added to the Highway 15 Plus Series wiring harnesses. New features: * A built-in LED flasher to support LED turn signals without the need to purchase an additional item * A back-up light feed and power wires to make the harness easier to install in a more modern vehicle * Improvements to instructions to cite a wider range of examples and real-world scenarios. The panel labeling has also been updated, along with the above physical changes—including wording modifications for enhanced clarity * A new high-amp alternator and main power connection kit. This allows for the use of high-amp alternators, and provides an even better level of fuse protection for the panel and charging system. The new connection kit utilizes 6-gauge wire and two 175 amp mega fuses * Extra connectors and wiring to more easily support a 4-headlight system without an additional add-on purchase * Longer neutral safety wires for cars with console shifters * An additional ignition circuit to support aftermarket components * Improved ignition switch with mating connector and four additional accessory and ignition terminals. Uses a square GM-style key Features carried over from the Highway 15 harnesses: * G-10 composite panel base measuring and nylon 6/6 panel components * GXL/XLPE GM color-coded wire * Self-locking screw clamp interface * American Autowire's signature gauge cluster disconnect * Ignition, headlight, and dimmer switches are included * Full-color, tabloid-sized, step-by-step instructions

4.83 out of 5 stars ( 6 )

$610.85

Painless Performance 19-Circuit GMC/Chevy Truck Harnesses

Painless Performance 19-circuit GMC/Chevy truck harnesses consist of a new chassis-designed harness for use on 1963-66 GM/Chevy pickups. These harnesses include a pre-terminated fuse block and high-temperature, color-coded wire. Complete wiring from headlight to taillight. Includes circuits for: * Air conditioning/heat * Accessory/FWD switch * Backup lights * Charging * Dome * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Wipers

4.9 out of 5 stars ( 10 )

$624.99

Painless Performance 21-Circuit Mopar Color-Coded Universal Wiring Harnesses

Painless Performance 21-circuit Mopar color-coded universal wiring harnesses can be used in almost any application where you want Mopar color-coded wires. They eliminate the troublesome bulkhead connector and use a unique covered micro-fuse block. Also featured is an auxiliary circuit with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers

3.89 out of 5 stars ( 27 )

$599.99

Painless Performance 24-Circuit 1967-68 Camaro and Firebird Harnesses

Painless Performance 24-circuit 1967-68 Camaro and Firebird harnesses are designed as direct replacements for your vehicle. They use a 1969 and newer style bulkhead connector design along with blade fuses and enough circuits to wire up just about any installed upgrade to your 1st generation F-body. Some minor bulkhead modifications are required. Factory original quick connect terminals are included for the in-dash printed circuit board. Each harness includes a detailed manual and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Dome and courtesy lights * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers and washer pump

4.0 out of 5 stars ( 22 )

$584.99

Clearance

Cascadia 4x4 VSS Solar Panel Kits

The future of vehicle charging is here! Cascadia 4x4 VSS systems are the world's first and highest quality, vehicle-specific hood-mounted solar option for passenger vehicles. The solar panels hard-mount to the hood of your vehicle and during daylight hours provide a constant flow of clean solar energy to your primary or secondary vehicle batteries. This affords you the ability to run 12 V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS systems are completely plug-and-play, if paired with Cascadia's optional MPPT solar charge controller and can be installed in as little as 1.5 hours. The panels have rugged, multi-layer, marine-grade construction to withstand extreme environmental conditions and remain maintenance-free for years. Plus, they offer a factory-like appearance, following the contours and edges of your vehicle's hood for a seamless and sleek aesthetic. Cascadia VSS solar panels utilize 3M neoprene foam and high-temperature 3M VHB tape for a secure install that will not damage your vehicle's paint. Select the system designed for your vehicle.

Not Yet Reviewed

$663.99

—

$683.99

Painless Performance 21-Circuit Ford Color-Coded Universal Harnesses

Painless Performance 21-circuit Ford color-coded universal harnesses can be used in almost any application where you want Ford color-coded wires. They use unique covered micro-fuse blocks, and an auxiliary circuit with 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Backup lights * Brake lights * Charging * Dome light and courtesy lights * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers

4.27 out of 5 stars ( 15 )

$587.99

On Sale

Summit Racing™ Direct-Fit AutoFuse Restoration Series Dash Harness and Accessory Kits

Summit Racing™ Direct-Fit AutoFuse Restoration Series dash harnesses and accessory kits allow you to maintain the plug-and-play functionality of the original factory-type harnesses while converting the entire fuse block from glass fuses to an updated and modern AutoFuse Series ATO-type fuse block. Our new kits offer restorers the flexibility to add additional power circuits, without the installation problems normally associated with this type of fuse box update. No cutting, modifying, or altering is required just plug it in and turn it on. Compatible with all original or remaining harnesses in the car. Choose the desired kit designed for your vehicle.

5.0 out of 5 stars ( 1 )

$657.99

$559.29

Painless Performance 28-Circuit Universal Muscle Car Harnesses

Painless Performance 28-circuit universal muscle car harnesses are a perfect solution to your wiring needs. They are designed to fit 1960s, 70s, or 80s GM, Ford, and Chrysler muscle cars where a bulkhead connector is required. These harnesses use the highest quality thermal-crossed linked (TXL) polyethylene wire rated to 275 degrees at 600 V--twice the voltage load of standard GPT wire. That's power on demand! Some minor bulkhead modification may be required. Please be sure to check the fitment of this harness, as there may be a more direct fit harness available for your vehicle. Includes circuits for: * Air conditioning/heat * Accessory * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers

4.67 out of 5 stars ( 3 )

$539.99

American Autowire Builder 19 Wiring Harness Kits

American Autowire Builder 19 wiring harness kits offer big power in a small panel! Great for tight wiring spots in your kit car, roadster, or truck, these Builder 19 wiring harnesses incorporate a slim fuse panel with mounting pads and an attached fuse panel cover with an inner label, identifying all circuits by description and fuse rating. And all high-output circuits incorporate superior spring steel-reinforced terminals, making the Builder Series second to none in durability and reliability. When you're down to the wire, the choice is easy--American Autowire! Builder 19 kits features: * Slim, compact, pre-wired ATO-style fuse panel * Headlight, dimmer, and ignition switches * Extra-long wire lengths for custom wire routing * Steering column connector and adapter * Full color schematics and instructions

5.0 out of 5 stars ( 2 )

$559.61

Painless Performance 26-Circuit Weatherproof Universal Chassis Harnesses

Painless Performance 26-circuit weatherproof universal chassis harnesses can be used to update the wiring in just about any on-road or off-road vehicle. These tough kits feature a weatherproof fuse block with an O-ring sealed cover, weatherproof heat-sealed crimp-on terminals, weatherproof horn relay, and machined crimped splices with weatherproof shrink tubing. They're adaptable to many of the original connector plugs in your vehicle and include pre-wired plugs for the headlights, GM turn signals, and column mounted ignition switch connectors. Includes circuits for: * Air conditioning/heat * Accessory #1 (Switched B+) * Accessory #2 (Switched B+) * Accessory #3 (Switched B+) * Accessory #4 ( B+) * Accessory #5 ( B+) * Accessory #6 (Switched B+) * Accessory/cigarette lighter * Brake lights * Charging * Fan relay activation power * Dome light * Electric choke * Emergency flashers * Fused power source * Headlights * Horn (relay) * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers

4.0 out of 5 stars ( 4 )

$514.99

Painless Performance 28-Circuit Trunk-Mount Chassis Harnesses

Painless Performance 28-circuit trunk-mount chassis harnesses allow you to remote mount your fuse block and have full power options. They will provide you with power accessory circuits, as well as extra-long wires allowing you to mount the fuse block in a remote location such as in the trunk or behind the rear seat. Like all Painless kits, these fuse blocks come completely pre-wired and terminated for a simple, painless installation. They come with GM column mounted plugs. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers

5.0 out of 5 stars ( 2 )

$549.99

American Autowire Highway 22 Plus Wiring Harness Kits

American Autowire Highway 22 Plus wiring harness kits are pre-engineered for power! Developed to handle your most demanding power requirements, these Highway 22 Plus wiring harnesses packs the punch of a high-powered OEM system into a smaller, easy-to-install, and extremely compact front loading package. Plus, they pack the mounting flexibility for creative and custom electrical systems! Perfect for your street rod, custom, or kit car, American Autowire components used in this panel have extreme power handling capabilities with an easy clamp-style system to make adding and removing wires easy--no terminals, no crimping, and no screws! When you're down to the wire, the choice is easy--American Autowire! Highway 22 Plus kits feature: * Modular fuse panel for added flexibility in mounting * 175 amp Mega-Fuse protection * Self-locking, screw-down, vibration-proof connections * 40 amp fan or fuel pump relay * Headlight, dimmer, and ignition switches * Extra-long wire lengths for custom wire routing * Full-color schematics and instructions The full list of the Plus features are below *Each kit will now include a built-in LED flasher to support LED turn signals without the need to purchase an additional item. *We've added back up light feed and power wires to make the harness easier to install in a more modern vehicle. *The pre-installed 20 amp relay can now be easily changed to function as either a keyed 12 volt or ground triggered item. *We've improved our instructions to cite a wider range of examples and real-world scenarios. The panel labeling has also been updated along with the above physical changes, including wording modifications for enhanced clarity. *The wiper circuit has been upgraded to a 20 amp fuse to support all aftermarket wiper systems. This has been made an accessory circuit for more adaptability. *The AC/Heat fuse has also been moved to an accessory circuit to eliminate draw from the blower motor while the vehicle is being started. *All kits will feature our new high amp alternator and main power connection kit. This allows for the use of high amp alternators, and provides an even better level of fuse protection for the panel and charging system. This new connection kit utilizes 6 gauge wire and two 175 amp Megafuses. *Extra connectors and wiring have been added to more easily support a 4-headlight system without an additional add-on purchase. *Longer neutral safety wires for cars with console shifters.

4.92 out of 5 stars ( 13 )

$676.40

Patriot Electric Exhaust Cutouts

Patriot Exhaust electronic cutouts feature a compact, leak-free, DIY-design with wireless remote and a simple 2-wire hook-up. Their stainless steel construction resists rust and corrosion over time, while boasting superior strength and good looks, while their compact size offers easy installation with versatile mounting locations. They fit a broad range of applications and allow for clearance on lowered vehicles. Whether out for a cruise or out on the track, Patriot Exhaust electronic cutouts will give you complete control over the sound of your exhaust. Additional features: * Available in 2.5 in. and 3 in. diameters in dual or single systems * Leak-free design with butterfly valve that seals against a recess machined body, or lip to prevent nasty leaks * Turn outs are located on a spin ring to allow 360-degree adjustability * Wireless remote with 2-wire hook-ups to the battery or fuse panel—no in-car switch required, no holes through the car to run wires * Unlike the competition, the exhaust system's strength is complemented by a straightforward bolt-on installation—no welding required

3.4 out of 5 stars ( 10 )

$549.02

VIAIR Continuous Duty Onboard Air Systems

VIAIR's Continuous Duty onboard air systems are a compressed air solution for inflating off-road tires (up to 37 in.), as well as powering up a variety of pneumatic applications. These systems feature one of the most popular "C" model compressors, the 485C Gen II. The upgraded duty cycle of 100 percent at 200 psi and the larger head port size of 3/8 in. NPT allow for faster fill rates, along with increased airflow to your applications. With the VIAIR Continuous Duty onboard air system, you can easily air up off-road tires and other power pneumatic applications like air horns, air lockers, load leveling and more! Air systems feature: * 485C Stealth black air compressor * 2.5 gallon air tank * 30 ft. coil hose * Digital tire inflation gun with 180 psi gauge * 1/4 in. NPT female thread quick-connect stud * 1/4 in. NPT male thread quick-connect coupler * Dash panel gauge with on/off switch * Pressure switch with relay * 1/8 in. NPT female thread to 1/4 in. NPT male thread reducer * 1/4 in. NPT 250 psi safety valve * 1/4 in. NPT drain valve * 1/4 in. NPT compression fittings * 20 ft. of 12-gauge wire with an inline fuse holder * Electrical connectors * IP67 ingress protection rating

5.0 out of 5 stars ( 3 )

$610.51

—

$735.50

VIAIR Pathfinder Constant Duty Onboard Air Systems

The VIAIR Pathfinder Constant Duty Onboard Air Systems operate at 200 psi from a 1.5 gallon tank and are powered by a 380C stealth black compressor—making for fast inflation rates for most Class B tires from 70 to 80 psi in under two minutes. This pre-packaged air solution comes with all necessary components needed to install a working system, useful for multiple pneumatic applications such as air tools, air lockers, blowing and cleaning tasks, inflating recreational equipment, air horns and many others. Features: * 380C VIAIR compressor with Thermal Overload Protector * 1.5-gallon VIAIR air tank (200 psi) * Illuminated dash panel gauge kit (black face, 200 psi) * Pressure switch (165 psi on, 200 psi off) * 40-amp 4-prong relay * Mini ANL fuse holder with 40-amp fuse * Mechanical tire inflation gun with 160 psi gauge * Two 30 ft. inside braided black coil hose with quick-connect and stud * 90-degree twist-on 40 in. chuck air hose * 45-Degree Dually Extended Reach Chuck * Rubber-tipped blow gun * Air source relocation kit * 1/4 in. (M) to 1/4 in. (M) NPT reducer * 1/4 in. (M) to 1/8 in. (F) NPT reducer * 5-piece tank port fittings kit for 200 psi rated systems * VIAIR storage bag Specifications: * Permanent magnetic motor * 12 V * Duty Cycle: 100 percent @ 100 psi (55 percent@ 200 psi) * Max Working Pressure: 200 psi * Max 12 V Amp Draw: 23 amps * Ingress Protection Rating: IP67

Not Yet Reviewed

$697.25

VIAIR Base Camp Heavy-Duty Onboard Air Systems

The VIAIR Base Camp Heavy-Duty Onboard Air Systems operate at 150 psi from a 2-gallon tank and are powered by a 400C chrome compressor—making for fast inflation rates for most Class C RV Tires from 70 to 80 psi in approximately one minute. This pre-packaged air solution comes with all necessary components needed to install a working system, useful for multiple pneumatic applications such as air tools, air lockers, blowing and cleaning tasks, inflating recreational equipment, air horns and many others. Features: * 400C VIAIR compressor with Thermal Overload Protector * 2-gallon VIAIR air tank (150 psi) * Illuminated dash panel gauge kit, black (150 psi) * 40-amp sealed 4-prong relay with pre-wired Female socket * Sealed pressure switch (110 psi on, 145 psi off) * Mini ANL Fuse holder with 40-Amp Fuse * Digital RV tire inflation gun with 180 psi gauge * Two 30 ft. inside braided black coil hose with quick-connect and stud * 90-degree twist-on 40 in. chuck air hose * 45-degree Dually extended-reach chuck * Rubber-tipped blow gun * Air source relocation kit * 1/4 in. (M) to 1/4 in. (M) NPT reducer * 5-piece tank port fittings kit (for 150 psi rated systems) * VIAIR storage bag Specifications: * 12 V * Permanent magnetic motor * Duty Cycle: 33 percent @ 100 psi * Max Working Pressure: 150 psi * Max 12 V Amp Draw: 30-Amps * Ingress Protection Rating: IP67

Not Yet Reviewed

$737.50

26 Results Found For "fuse panel"