Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
697 Results Found For "bbc"
Pro-Filer Performance Products Sniper Big Block Chevy Intake Manifolds
Pro-Filer Performance Products Sniper big block Chevy intake manifolds--the ultimate in BBC conventional port intakes! Available for 9.8 in. or 10.2 in. deck heights, these bad boys are designed with the perfect runner-to-plenum volume to maximize the power and acceleration curves of your engine. They're made from aerospace-grade aluminum alloy and feature cast injection bosses, a 4500-style carburetor flange, four corner water bosses, and your choice of a variety of port configurations. Sniper BBC single plane intakes also feature: * 1 in. cast spacer * Optimized cross sectional area * Precision-cast runners * Recommended for 565+ c.i.d. engines Note: For optimum performance, Sniper intake manifolds should be port matched to the heads. Tall deck models require either a slip collar distributor or a distributor designed for a tall deck block. There is not enough material in the intake floor to safely machine it to use a short deck distributor.
( 3 )
$749.99
Pro-Filer Performance Products Sniper Jr. Big Block Chevy Intake Manifolds
First off, don't let the Jr. fool you--this Pro-Filer Sniper Jr. intake is just as good as its big brother! The Sniper Jr. intake manifold is optimized for engines 68 to 540 c.i.d. and larger with BBC cylinder heads such as Pro-Filer's Sniper and Sniper X with deck heights of 9.8 in. or 10.2 in. Yes, this is the intake those of you that race in a conventional head class have been looking for! They produce remarkable horsepower out-of-the box, with features such as cast injection bosses, 4500 Series carb flange, four corner water bosses, and exclusive as-cast ported plenum and runners, making this Sniper Jr. intake the best in BBC manifolds!
( 6 )
$749.99
Trick Flow® R-Series Intake Manifolds for Big Block Chevrolet
Trick Flow® single plane, rectangular port R-series intake manifolds for your big block Chevy features high-flowing extended runners and raised plenum floors to increase horsepower and torque. They are designed for 500-plus cu. in. engines and deliver maximum power between 3,500 and 8,000 rpm. Plus, their integral bosses for nitrous injection and extra material for custom porting. For use with Dominator-style carbs.
Not Yet Reviewed
$699.99
LS Classic Series Big Block Chevy Style LS Valve Covers
LS Classic Series big block Chevy style valve covers are designed to give the appearance of a big block Chevy while fitting the LS family of engines. Like all our cast aluminum valve covers, they accept the OEM rubber seals (not included) and bolt directly to the cylinder head. With no extra adapter required, there is less chance of leakage and the covers are only 2 in. tall. The valve covers include a billet aluminum filler cap on one cover for easy oil filling, and come with all the necessary mounting hardware, including factory look load spreaders. They also have a ported PCV fitting/vacuum port and oil splash baffle in one cover. The castings are designed to be thick enough for drilling and tapping for fittings. Covers are available with a natural cast finish, chrome plated, or painted Chevrolet orange and include vintage Chevrolet Tonawanda factory stickers. Order the LS valve cover in your preference of finish.
Not Yet Reviewed
$710.95
Summit Racing™ Link Bar Hydraulic Lifters
Summit Racing™ link bar hydraulic lifters are drop-in retrofit lifters designed to allow conversion to street hydraulic roller camshafts. These lifter bodies are machined from cold formed steel with clipped axles. They feature .700 in. diameter wheels and are designed for street use up to 6,500 rpm.
( 19 )
$648.99
Sanderson Headers Blockhugger Headers
You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.
( 311 )
$509.11
Meziere 100 Series Electric Water Pumps
Meziere 100 Series electric water pumps deliver 35-40 gpm of flow. Because they're electric, you won't have the usual horsepower loss at high rpm caused by a mechanical pump's impeller. Plus, their lightweight billet aluminum construction reduces overall engine weight. These pumps also feature CNC-machined aluminum housings, epoxy coated motor windings, an RF suppression circuit, and a one-piece, carbon-ceramic seal. They're available for a wide variety of V8 engines, including LT1 and LS1.
( 89 )
$500.15
—
$584.26
Meziere 300 Series Electric Water Pumps
Meziere 300 Series electric water pumps are the Big Daddy of electric water pumps. They're capable of flowing 55 gpm--enough for a 600 hp oval track car or a 2,200 hp Pro Mod. They have larger internal passages and heavy-duty motors and are available in radiator, remote mount, or engine mount versions. These pumps feature CNC-machined aluminum housings, epoxy coated motor windings, an RF suppression circuit, and a one-piece, carbon-ceramic seal.
( 83 )
$600.19
—
$703.23
March Performance Chevy Big Block Serpentine Conversion Kits
March Performance Chevy big block serpentine conversion kits simply bolt onto the front of any big block Chevy heads. Depending on the kit you choose, the alternator, A/C, and optional power steering will be either outward or mid-mounted. These pulleys are precision CNC-machined from solid billet 6061 T-6 aluminum to fit perfectly and handle high-torque and vibration. They are then clear powdercoated to eliminate polishing in those hard-to-reach places. These pulleys will not fracture like common cast pulleys, since they have high-tensile strength for much longer wear. The street rod ratio increases water flow and fan speed, which helps during critical low-speed driving. The kits are available with performance pulleys for increased horsepower, high water flow ratios for increased cooling, or mid-performance ratios for a combination of both.
( 51 )
$504.99
—
$693.99
Summit Racing™ Forged Pro Pistons
Summit Racing™ Forged Pro Pistons brings modern engine piston technology to older engine platforms at the great value. Why use an antiquated piston designed fifty years ago in your new build? A great piston starts with a great forging. Forged Pro piston forgings are stronger AND lighter. This makes more power AND takes stress off the crank, rods and block at higher rpm. It also saves money balancing a crank when heavy metal is not required. Forged Pro pistons are designed around ultra-modern Nitride Steel top ring packs and Summit GP Gas Ported variants. Less friction results in more power and less bore wear. Superior machining results in less blowby for less oil consumption and longer life is the result. Better rings are great horsepower per dollar! Most old production engines were designed to run on 87 octane in heavy vehicles. If you're building a performance engine, chances are you're running it on 91+ octane and you might as well add a little pop. Forged Pro pistons yield an extra 1/2 point of compression in most instances. This is free power from idle on up for the life of the engine! Forged Pro pistons have extra thick ring lands for moderate boost and nitrous. Special care has been taken to deburr critical areas for more strength and less chance of detonation. Special skirt profiles are designed to run at tighter clearances than other forged pistons for less piston rock. This helps them make more power, run quieter and last longer than other forged pistons. Make your build run with the best of them!
( 6 )
$655.99
Summit Racing™ Performance Connecting Rods
Summit Racing™ Performance 4340 forged steel connecting rods come in a variety of applications and options. From a light rod street-strip cruiser to a beefy rod for a 1500 hp big block, you will find just the rod for your combination. As always, Summit Racing™ connecting rods are packed with great features at the best prices. Options and features: * Chevy, Ford, Chrysler, and Pontiac * Big and small blocks * Multiple lengths * H-beams and I-beams * Through-bolts to cap-screws * Press-fit to full-floating * Multiple grades of rod bolts from 8740 through L-19
( 40 )
$519.99
—
$744.99
COMP Cams 4-Pattern Hydraulic Roller Camshafts
To make the most power from your engine, you need to optimize the air ingested and captured by avoiding valves closing too soon or too late. COMP Cams 4-pattern hydraulic roller camshafts are the first series of cams designed to accommodate a difference in runner length and avoid valves closing at the wrong times. Any conventional center-layout single throttle body or carbureted V8 intake manifold features longer outboard runners and shorter inboard runners, meaning that each valve event should occur at a different moment. COMP Cams has designed a series of cams that optimizes valve events and features a large increase in both area under the curve and stability at high rpm. They feature four different lobe patterns with one intake and exhaust design for outboard runners and another intake and exhaust design for the inboard runners. While the four central cylinders are all the same grinds, the outboard exhaust openings are two degrees earlier, with outboard intake closings coming two degrees later. NASCAR has been utilizing this technology for years. COMP Cams is now applying this same knowledge in street vehicles to balance air/fuel ratio per cylinder. These cams are CNC-ground from steel billet cores. They feature cast iron distributor gears and utilize a series of lobes with over .600 in. valve lift and stability up to 7,500 rpm, all while providing more consistent cylinder to cylinder torque. They also feature tight lobe separation for both excellent power and a throaty sound. Designed for small block Chevy, big block Chevy, and small block Ford carbureted or fuel injected applications, the design is exclusive and unique to COMP Cams.
( 4 )
$649.95
Meziere Mechanical Water Pumps
Want to stay mechanical when doing a water pump swap on a big block Chevy? Check out Meziere mechanical water pumps, the perfect set up for your serpentine-style belt, reverse rotation. These belt driven pumps are not only show-quality, they're race bred inside! Their all billet construction makes them a definite show stopper, but the true beauty lies within the water pumps adjacent performance chart--and on your vehicle's temperature gauge. Top end figures match the best racing pumps on the market and off idle flow is 5 to 7 GPM higher than any other competitor, and can save a racer over 10hp compared to a stock pump. They also eliminate most low speed cooling issues for the street rodder. Suitable for street or racing applications.
( 2 )
$532.81
—
$542.50
March Performance Meziere Electric Water Pumps
March Performance Meziere electric water pumps deliver superior American-made quality. Don't be misled by inflated flow numbers and outlandish claims. Choose a Meziere electric water pump from March Performance. Water pump models feature: * Suitable for street or drag strip use with a 2,500+ hour life expectancy * Show-quality polished finish * Standard motor provides 35 gpm free-flow rating * All stainless steel hardware included * Lightweight (a complete standard big block Chevy unit weighs only 5.5 lbs.) * Stainless steel large diameter main shaft with high performance ceramic seal * 1 in. NPT inlet
Not Yet Reviewed
$533.99
March Performance Chevy Big Block Serpentine Drive Kits
March Performance Chevy big block serpentine drive kits simply bolt onto the front of any big block Chevy heads. The bracket kits come complete with stainless steel tensioning rods and chromoly rod ends for high performance operation. Matching serpentine pulleys are precision CNC-machined from 6061-T6 aluminum and then clear powdercoated to eliminate polishing in those hard-to-reach places. These pulleys will not fracture like common cast pulleys, since they have high tensile strength for much longer wear. The high-wear areas on these pulleys are hard coated. Their street rod ratio increases water flow and fan speed, which helps at critical low-speed driving. These performance pulleys create approximately 12 hp, depending on the accessories driven.
( 5 )
$575.99
—
$716.99
AFR 335cc Enforcer BBC Cylinder Heads
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$606.00
On Sale
Holley Sniper Carbureted Fabricated Intake Manifolds
Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo
( 37 )
$912.95
$507.05
—
$707.95
CVR Mechanical Vacuum Pumps
CVR mechanical vacuum pumps can be used on wet or dry sump engines and are designed with precision-sealed roller bearings. They are precision-machined from T-6 6061 aluminum and clear hard-anodized for extended wear. CVR pumps achieve greater vacuum sooner and are maintenance-free. They're also available as a kit with a mounting bracket for small block and big block Chevrolet cylinder heads, or any engine using a motor plate.
( 1 )
$505.99
FuelTech FT450/550 Sportsman Datalogging A Harnesses
FuelTech FT450/550 Sportsman Datalogging A harnesses are designed around a Big Block Chevy, yet these harnesses have extra-long leads that allow them to be used in numerous other applications. They provide a plug-and-play solution to easily incorporate datalogging into any setup equipped with an FT450 or FT550 ECU. These harnesses come pre-terminated to plug directly into essential data logging input channels and have an extra input connector to add up to two more configurable inputs for sensors or buttons. They're also equipped with two extra connectors that allow the use of 10 outputs to control EFI fuel Injectors, ignition control through a CDI box with points input or smart coils (eight coils on wasted spark is not recommended for carbureted V8 applications). Tech specs: * Harness is set up for either VR or Hall effect cam and crank sensors and includes two relays with built-in fuses for main electronics, injectors, and coils * FT450 connector (FT550 A connector) * CPC firewall connector * Each connector has its own label and harness insulation is heat, moisture, and oil-resistant * Pre-terminated connections: for Wide Band 02 Sensor x2, Oil Pressure, Fuel Pressure, Engine Temperature and Transmission Temperature * Drive shaft sensor/2-step connector * Extra Inputs connector: 2 configurable inputs for sensors or buttons * Extra Outputs connector: For DIY expansion to control EFI fuel injectors or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Ignition Expansion Connector: For DIY expansion to control ignition or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Comes with two 40A relays and fuses to power everything—the relays power the ECU, Wideband Nano O2, Peak and Hold drivers, sensors, and extra connectors Contents of package: * Harness and instruction manual
Not Yet Reviewed
$749.00
Moroso Drag Race Pans
Moroso drag race oil pans are available for hundreds of vehicle-specific applications. The sizes and configurations are built for easy installation and optimum performance. Our selection includes a variety of styles, materials, and fluid capacities for drag racing, street and strip, and road race usage. Order the replacement model designed for your ride.
( 60 )
$665.99
—
$745.99
Eagle H-Beam Connecting Rods
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 85 )
$571.99
—
$736.99
Moroso Fabricated Aluminum Valve Covers
Racers who use the latest cylinder heads or want a unique look for their engines—or both—can now find quality, lightweight aluminum valve covers at an affordable price. These Moroso fabricated aluminum valve covers have thick billet rails for superior gasket sealing and resistance to warping. They mount through tubes welded directly to the valve covers—to help maintain gasket-rail flatness and prevent leaks. The covers feature a tall design that will clear all rocker combinations, as well as stud girdles. Some models have built-in oilers to keep valve springs cooler in oval track racing. Order the model designed for your vehicle and engine application.
( 27 )
$542.99
—
$722.99
Moroso Straight Box Sump Oil Pans
Moroso straight box sump oil pans clear 4.75 in. stroke with most steel rods, 4.5 in. stroke with most aluminum rods. The core-based pans use the stock bolt pattern—and feature dual trap doors, rear anti-climb baffle, and removable anti-slosh baffle for improved oil control. The replacement units are constructed of steel with a clear zinc finish for protection. They're designed for use with 168 and 153-tooth flywheel combinations.
Not Yet Reviewed
$522.99
COMP Cams Drag Race Xtreme RX Roller Camshafts
These COMP Cams Drag Race Xtreme RX roller camshafts are designed with racers in mind. Their ability to withstand high valve spring pressures, while having the most aggressive lobe profiles, makes these cams a favorite among engine builders wanting maximum performance at high rpm. These camshafts are designed to use roller lifters that reduce power-robbing friction to make the most of your high performance engine. These COMP Cams Drag Race Xtreme RX roller camshafts will give you serious street performance, or the all-out race motor power and sound you want, without sacrificing reliability.
Not Yet Reviewed
$531.95
