Availability
774 Results Found For "Single"
Showing In Stock Items. Show All 1146 Items.
Not Showing Customizable Items. View Customizable Items.
On Sale
Holley EFI LS Single Plane Split-Design Race Intake Manifolds
Developed with performance in mind, Holley EFI LS single plane split-design race intake manifolds feature a race bred, 2-piece split design that was previously found only on the most expensive race intakes. These manifolds will fit GM LS Gen III engines with cathedral port heads for high performance/racing engine applications with 5.3 to 6.2 liter displacement and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. The single-plane design provides optimal performance across the rpm spectrum, while the split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, makes custom porting and matching a snap. Shoulder bolt locators and an O-ring seal makes reassembly simple and precise.
( 6 )
$749.99
—
$849.99
$584.95
—
$700.95
Offenhauser Single-Quad Intake Manifolds
With Offenhauser single-quad intake manifolds, you can replace an old-style induction systems with an updated manifold. These units blend some of the nostalgic look of the older systems with the improved power, responsiveness, and ease of tuning of a modern 4-barrel. Their design equalizes distribution to all cylinders for better efficiency throughout the rpm range. The single-quad intakes are offered in multiple configurations to fit different applications.
( 35 )
$572.99
—
$682.99
Brodix Cylinder Heads Single Plane Intake Manifolds
Brodix cylinder heads single plane intake manifolds can deliver the power you need on the street, at the track, or on the strip. They're a single 4-barrel design that features a tall open plenum for increased flow, plus extended runners for improved flow velocity. This helps to boost power and makes the manifolds perfect for drag and oval track racing. If you're looking for even more power, models are available with bosses designed for nitrous hookup. Order the unit tailored for your application.
( 3 )
$641.99
On Sale
Holley EFI LS Single Plane Mid-Rise Intake Manifolds
Holley EFI LS single plane mid-rise intake manifolds are great for your higher horsepower engine. Featuring cast aluminum construction, these manifolds are also great for centrifugal blower, turbocharged, or NOS mild power adder applications. The efficient casting design is lightweight--11.5 lbs.--with consistent wall thickness and strong mounting flanges. The optimized runner layout and constant cross sectional area offer a broad torque curve, with the best vehicle performance from 2,500 to 7,000 rpm. The mid-rise design offers minimum carb mounting flange height--without sacrificing power--and is another plus for vehicles with minimum hood modifications. Holley EFI LS single plane mid-rise intake manifolds include zinc-plated hex head cap mounting bolts and washers, pipe plugs to block manifold vacuum and MAP sensor ports, and Viton® O-ring cylinder head mounting flange gaskets for an OEM-style seal.
( 9 )
$584.99
$525.95
On Sale
Holley Single Plane Carbureted Intake Manifolds
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 10 )
$579.99
$520.95
Offenhauser 360 Degree Single-Quad Dual-Port Intake Manifolds
Offenhauser 360 degree dual-port single-quad intake manifolds feature completely separate runner systems for the primaries and secondaries. At low-load, the primaries feed the fuel-air charge through the smaller bottom passages at near sonic speed, improving power and efficiency. When the secondaries open, their charge goes through the bigger, cooler upper passages. Then, in turn, it is rammed into the cylinders when it encounters the high-velocity mix from the primaries. The result is better fuel economy, lower emissions, and a substantial power increase across the whole rpm range.
( 3 )
$562.99
On Sale
Holley EFI Gen III Hemi Single Plane Intake Manifolds
Holley EFI Gen III Hemi single plane intake manifolds provide maximum hood clearance combined with plenum and runner geometry that provides a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The isolated design of the air/fuel passages helps to increase charge air density and performance. Holley EFI Gen III Hemi single plane intake manifolds are great for turbocharger, centrifugal blower, or NOS power adders. Features: * Minimum carburetor flange height for maximum clearance to hood * 4150-type throttle/carb flange * Cast aluminum construction * Billet fuel rails * Billet aluminum oil fill cap * Mounting brackets for use with either Bosch EV1 or Gen III Hemi OEM fuel injectors * O-ring seals around ports * Natural or black finish available
( 2 )
$675.99
$607.95
KC HiLiTES Gravity LED Pro6 Single Mount Lights
KC HiLiTES Gravity LED Pro6 single mount lights are offered in a variety of beam pattern options—spot, driving and off-road—to meet all your lighting needs. The Gravity LED Pro6 utilizes KC's patented Gravity Reflective Diode (GRD) technology and reflector design that assures that actual emitted light output from each LED is being maximized in creating powerful, usable light for everyday on road or off-road use. The GRD technology strategically positions LEDs inside the reflector, so all light output is being carefully directed and aimed to deliver usable light. What you get is highly targeted light distribution, providing unparalleled clarity, performance and beam shape. The Pro6 Single comes ready to mount to any flat mounting surface with a highly adjustable ball mount that easily attaches to a wide range of vehicles, including your Jeep, Truck or UTV.
( 1 )
$564.99
Clearance
Billet Specialties Street Lite Polished Single Beadlock Wheels
Billet Specialties Race Series of wheels deliver aggressive styling with a machined recessed bolt pad for additional weight savings. This unique feature along with the optimized design of the spokes saves nearly a pound off the weight of similar wheels. Street Lite beadlock wheels are members of Billet Specialties Race Series that offer amazing looks and are designed to be the ultimate street and strip wheels. These ultra-lightweight wheels handle the everyday street with ease, thanks to their rotary-forged center structure, while providing serious performance for the drag strip and uncompromising style. Billet Specialties Street Lite 2-piece beadlock wheels feature polished centers with machine finished windows and recesses, a polished rim outer face, and a machine finished back topped with a scalloped black anodized ring. Select the Street Lite wheels with the fitment specs needed for your vehicle. Additional features: * Forged 6061 T-6 center for strength and lightweight * Spun aluminum rim for superior strength and trueness * SFI 15.1 certified * SAE J2530 certified * Single billet black anodized beadlock
Not Yet Reviewed
$1,582.99
$599.50
Vision Off-Road 111 Nemesis Series Polished Wheels with Single Beadlock
Vision Off-Road 111 Nemesis Series polished single beadlock wheels are an aggressive, durable forged aluminum option for trucks and SUVs. They feature a concave profile, seven split-spokes, recessed center hub, machined details, and a bolted outer ring for a functional beadlock. Nemesis wheels are available in a variety of diameters, bolt patterns, and other fitment specifications. A dynamic race-inspired blend of rugged looks with street drivability!
Not Yet Reviewed
$568.99
—
$629.99
On Sale
Nitrous Outlet Single Nozzle Dry Nitrous Systems
Nitrous Outlet diesel nitrous single nozzle dry systems are available for both gasoline and diesel fuel setups. Most feature a boost activation switch that you can set between 1.5 and 20 lbs. This will allow you to control when the nitrous system is activated and spray up to 500 hp with additional jetting. These kits include everything you need to safely and easily install a dry nitrous system on your vehicle, such as hardware, electrical, jetting solenoid, lines, and more. They come with jetting for 35-50-75-100-150-200 hp.
Not Yet Reviewed
$588.99
—
$668.99
$500.64
—
$568.64
Skyjacker Single Flex Control Arms
These single flex control arms from Skyjacker are fitted with a spherical rod end on one side, and a greasable polyurethane bushing on the other. They're available in upper and lower arms for a variety of applications.
( 1 )
$505.99
—
$554.99
On Sale
Nitrous Outlet EFI Single Nozzle Systems
Nitrous Outlet EFI single nozzle systems come with more jets to set horsepower exactly where you want it. They include everything needed to add horsepower to your late model EFI vehicle--hardware, wiring, jetting, solenoids, hoses, and a nozzle. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. Get Nitrous Express race-proven systems because of their quality components and extreme performance.
Not Yet Reviewed
$836.99
—
$875.99
$711.44
—
$744.59
On Sale
Nitrous Outlet EFI Single Hydra Nozzle Systems
Nitrous Outlet EFI single Hydra nozzle systems are designed to work with any late model EFI application. These universal Hydra single nozzle wet nitrous systems feature a multi-discharge designed nozzle that is made for EFI applications where a nitrous plate is not available, or may not fit. The multi-discharge saturates the air intake charge, providing the best atomized mixture of nitrous, and fuel into the air stream. Nitrous Outlet EFI Hydra systems are capable of reliably spraying 35 to 250 hp of nitrous on your vehicle, and they include a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will help in preventing engine damage and lean spikes. Nitrous Outlet EFI single Hydra nozzle systems include everything needed to add up to 250 hp to your vehicle. They are offered with three different bottle capacities or without a bottle. Features and contents: * 1/8 in. NPT nozzle * All hardware and wiring * Jetting for 35, 50, 75, 100, 150, 200 hp settings * Nozzle * Limited lifetime warranty 400 hp solenoids * Hoses * E85 Compatible with different jetting
Not Yet Reviewed
$768.99
$653.64
Competition Engineering Universal 80 in. Single Wheelie Bar Kits
Competition Engineering universal 80 in. single wheelie bar kits are perfect for the professional and amateur chassis builder. They feature the lower tube and wheel pocket and are welded for perfect alignment, while still allowing the builder to trim them to any desired length. The bars are 1 in. diameter x 0.065 in. thick wall chromoly tubing that is strong, yet lightweight, while the two high-misalignment rod ends allow the bar to adjust to any rear axle housing without the need for a tubing bender. The kits include all necessary hardware and a set of detailed instructions.
( 1 )
$637.99
On Sale
ACCEL Motorcycle Single/Dual Fire Ignition Modules
No longer do you have to change modules when you want to switch from dual fire to single fire on your bike. Just install the appropriate coil or coils, flip the switch on these ACCEL Motorcycle single/dual fire ignition modules, and you are ready to go. You can choose from 14 pre-designed advance curves that cover everything from a stock engine to an all-out high-compression monster. These modules also feature on-board rev limiting, an LED for easy static timing, and will work with or without V.O.E.S. input. Their machined aluminum housing offers superior heat sink capabilities and at the same time is more rigid than the competitor's plastic shells.
Not Yet Reviewed
$715.99
$643.95
UWS Single Door Underbody Series Toolboxes
UWS Single Door Underbody Series toolboxes provide unbeatable storage and security for your items under the bed of your truck or trailer. The toolbox conveniently mounts underneath the bed of a flatbed truck, dump truck or trailer, leaving more space on top of the bed for other cargo. The boxes feature a corrosion-resistant aluminum construction, heavy-duty aircraft cable door supports and a highly secure stainless steel locking system—all to keep your equipment and valuables safe and easily accessible whenever needed. The UWS underbody toolboxes are constructed from extra-thick aluminum for increased structural strength. The tub is welded together into a single piece for weather resistance and to easily hold heavy tools and other items. The door features aircraft-grade stainless steel cables, rated to support up to 1,000 lbs., ensuring reliable strength and door operation. The locking mechanism of this single door underbody series truck toolbox provides excellent security for your tools and items, featuring a stainless steel, key-operated T-handle. Key features: * Mounts above or below flatbeds, dump trucks and trailer bodies * Extra-thick, one-piece aluminum tub holds heavy tools and cargo * Stainless steel aircraft cables for strong door support * Door opens 90 degrees for easy loading and unloading of tools and equipment * One-hand access with lockable T-handle for convenience and security * MicroSeal gasket helps seal out moisture, dust, and dirt * Multiple box sizes available for a custom fit on each truck application * Manufacturer limited lifetime warranty (one-year finish, one-year parts) Notes: Includes box only (mounting hardware not included).
Not Yet Reviewed
$666.99
Vision Off-Road 350 OJOS Series Machined Wheels with Single Beadlock
The 353 OJOS Series machined wheels with single beadlock from Vision Off-Road are the perfect Race/Baja style wheels for anyone willing to get their truck a little dirty. Designed with nine spokes that are supplemented by a black beadlock ring for off-roading, as well as to enhance the styling of any all-terrain or mud-terrain tire, the Vision OJOS beadlock wheels are made of a dependable cast aluminum in a one-piece construction with a machine sliver finish. Additionally, these wheels are balanced out by an exposed center and a cap that is stamped with the Vision logo to help create a complete look. Discover the perfect combination of style, quality, and performance with the Vision 350 OJOS Series machined wheels with black beadlock ring—they're built for serious off-roading.
Not Yet Reviewed
$604.99
Race Star 92 Drag Star Single Beadlock Wheels
Race Star 92 Drag Star single beadlock wheels are a lightweight, durable option designed for drag racing and high performance street use. Forged from aluminum alloy, they feature a 5-spoke star design, large brake clearance, and a single functional beadlock ring to lock the tire to the wheel, preventing slippage at high speeds. The wheels are available in multiple widths, diameters, bolt patterns, and other fitment options. Key details: * Beadlock security: Specifically designed to secure the tire bead, allowing for lower tire pressure to increase traction on the drag strip * Durable gloss black finish * Direct-drilled bolt patterns for a precise, secure fit * Bolt-on center cap included * Drag Star 92 wheels are popular among racers looking for a budget-friendly option without sacrificing performance
Not Yet Reviewed
$638.99
On Sale
FUELAB Single Pump Fuel Surge Tank Systems
FUELAB single pump fuel surge tank systems are ideal for Autocross or off-road use—where fast changes in g-forces can allow air to be picked up by the main fuel pump. FUELAB fuel surge tank systems maintain a small amount of fuel to operate their own internal fuel pump that can supply high fuel flow rates, while only needing a relatively low fuel flow rate from the main fuel pump. A return line is required to return excess fuel back to the vehicle's fuel tank. Every FUELAB surge tank features a high-quality billet aluminum construction and long-lasting finish. There are two different sizes available to fit your specific needs.
Not Yet Reviewed
$789.99
—
$796.99
$710.99
—
$717.29
On Sale
Summit Bucks
Mishimoto Universal Single-Pass Air-to-Water Intercoolers
Keeping air intake temperatures low is the key to decreasing the impact of heat soak, reducing detonation, and producing consistent power output. As a result, intercooler systems have evolved substantially over the last decade, bringing liquid-to-air intercoolers into popularity. Mishimoto Universal single-pass air-to-water intercoolers are highly efficient designs that deliver effective cooling in compact packages. Each intercooler features 5mm thick, cast aluminum end tanks that are custom engineered for superb airflow, reducing overall pressure drop through the cooler. The tanks are professionally TIG welded to the cores, resulting in a pressure tolerance of up to 100 psi of boost, plus they feature unique CNC-machined, ribbed inlet and outlet coupler connections, ensuring maximum grip between coupler and piping. They are finish with a durable, micro wrinkle black powdercoat, and they incorporate -16 ORB coolant ports into the core and include 1/8 in. thick steel mounting brackets for an easier install. Providing a single-pass coolant flow configuration, Mishimoto universal intercoolers are available in multiple bar-and-plate core sizes with either same-side or opposite-site outlets. They support builds producing up to 1,500 hp.
Not Yet Reviewed
$590.99
—
$829.99
$531.89
—
$746.99
OTC Single-Acting Spring Return Rams
Available in 5 to 100 ton capacities, these OTC hydraulic rams can handle a wide range of load conditions. OTC's design ensures positive, leak resistant sealing throughout all pressure ranges, while maintaining full piston return characteristics. OTC also manufactures these rams with additional bearing surface to effectively resist the stress by off center loads.
( 1 )
$569.99
On Sale
Nitrous Outlet Single-to-Dual Stage Conversion Kits
Add another stage of performance with Nitrous Outlet's single-to-dual stage conversion kits. They offer both wet and dry kits that will improve your current setup to a true dual-stage capable system. Both are great ways to break up a large shot and keep your tires hooked up and heading straight down the track. Each kit includes 400 hp solenoids, an NPT nozzle, nozzle adapter, solenoid brackets, hoses, electrical, hardware, and jetting from 35 to 150 hp. Upgrade your single stage setup with a Nitrous Outlet single-to-dual stage conversion kit. Note: These are not complete systems and are designed to be used in conjunction with a complete nitrous system.
Not Yet Reviewed
$712.99
$606.04
Edelbrock Performer Carburetors
Edelbrock's Performer carburetors feature 2-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves—and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. An Owner's Manual is included with every Edelbrock carburetor. The manuals consist of two sections: Section 1, Theory of Operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, Tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor is also included. Performer carburetors are available with a variety of options; select the model that best suits your needs.
( 1531 )
$524.99
—
$597.99
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster