Availability
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$659.95
$509.95
—
$779.95
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$681.95
$509.95
—
$865.95
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$736.95
—
$865.95
Roto-Fab Big Gulp Series air intake systems were designed to feed the air demands of the fastest cars in the world. Don't leave horsepower on the table—get the most out of your modifications. Order the kit recommended for your specific vehicle. Roto-Fab Big Gulp Series air intake system features and notes: * Innovative air box coupling: allows for solid mounting to the air box as the system transitions from the air filter clamping surface; seals out unwanted engine heat * Air box seals effectively to the hood, allowing for maximum air filter size and air box volume * Utilizes the full factory air inlet to ensure low IATs and maximize performance * 100 percent silicone hose couplers to ensure lasting product quality * Custom fabricated inlet elbow to maximize performance and airflow cross-section * Oversized breather port to further accommodate high-horsepower applications * Polymer duct work is also effective in reducing heat transfer * Requires a custom tune for your vehicle
( 4 )
$614.95
—
$719.95
Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller bottom passages at near sonic speed, improving power and efficiency. When the secondaries open, their charge goes through the bigger, cooler upper passages. Then, in turn, it is rammed into the cylinders when it encounters the high-velocity mix from the primaries. The results are better fuel economy and a 15-30 percent power increase across the entire rpm range. These manifolds are available in a variety of styles and options for many year/make and engine applications.
( 45 )
$504.99
—
$841.99
If you are looking for the convenience of an oil-free air filter, Roto-Fab dry cold air intake systems put a new spin on great performance and sound. Roto-Fab developed these intake systems to utilize all the available space to package a huge air box and massive filter while maintaining an extremely effective barrier against engine bay heat. Their intake packages perform well as a "stand alone" modification while being capable of meeting the higher air demands of supercharged and high-horsepower builds. Roto-Fab's open top design effectively seals to the hood which maximizes air box volume while providing all of the advantages of a lid. Features include: * Top-quality components throughout including: high-gloss silicone hose couplers, stainless steel hose clamps and fasteners, and molded-in inserts for air box and MAF sensor mounting * High-quality filters designed to last the life of the vehicle * Depending on application, systems are available with or without sound tube delete * Detailed, step-by-step instructions are included for easy installation * Where applicable, the logo badge on the air box has a black anodized finish with a laser-etched Roto-fab logo
( 41 )
$509.95
—
$574.95
Intended for 500-plus inch, high-rpm engines, Trick Flow® R-Series intake manifolds for Ford 429/460 provide significant horsepower and torque increases. These single plane intake manifolds feature a one-piece, spider-type design with high-flow, individual extended runners and a raised plenum floor. Other features include A319 aluminum construction, extra material for custom port work, and bosses for nitrous or fuel injection. The intake manifolds are designed for use with Holley 4500 Series Dominator carbs. Overall height to carburetor mounting pad is 8.600".
( 8 )
$724.99
On Sale
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$811.95
$540.95
—
$844.95
These Vortec manifolds with TBI from Chevrolet Performance are designed for maximum horsepower with throttle body fuel injection and EGR usage. These manifolds will fit all Vortec-designed cylinder heads.
( 17 )
$683.17
Edelbrock Super Victor II intake manifolds are designed for use with large cubic inch big-block Chevy engines using the latest design conventional port heads. They're ideal for any 1,000+ horsepower drag race engine with high air flow requirements. Slip collar distributors are recommended for these manifolds when used on short deck blocks. All manifolds have extra-large carburetor outer flanges with a 5 x 5 in. opening to fit high flow carburetors and throttle stops. Modern casting techniques create smooth, thin, extended divider walls for "out of the box" performance, just port match and go!
( 7 )
$637.95
—
$854.95
On Sale
Corsa carbon fiber DryTech 3-D air intakes blend aesthetics and engineering to deliver in a single package. The intakes efficiently direct airflow from the filter to the throttle body. Streamlining the airflow eliminates any calibration concerns, and helps increase throttle response. Features include: * 100 percent carbon fiber construction * Outflows stock intake creating more horsepower and torque * DryTech 3-D synthetic dry filter
( 6 )
$675.99
—
$892.99
$608.39
—
$803.69
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$507.67
On Sale
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$663.95
$519.95
—
$801.95
Dart dual plane intake manifolds are designed to improve torque, add horsepower, and make that otherwise stock engine look a little more aggressive. They are manufactured from durable cast aluminum and are machined to tight tolerances for excellent flow characteristics. The manifolds' optimized runner length and plenum style offer improved low end to midrange performance.
( 3 )
$814.95
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases
( 436 )
$699.00
Halltech Killer Bee MF103 cold air intake kits offer bolt-on horsepower and torque for your C6 Corvette. These performance induction systems require no additional tuning, however, if you choose to tune, you can expect 31 to 35 RWHP. Killer Bee systems include Halltech's Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and they feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed, plug-and-play Killer Bee induction systems also feature strong and durable XLPE poly construction. They are offered in black or red to complement your red fuel rail covers, and come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 3 )
$619.99
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$663.95
—
$838.95
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
On Sale
BTR Equalizer 1 intake manifolds are low-profile, high performance intakes. Cast from 319 aluminum, these Brian Tooley Racing manifolds are designed for combinations that are looking to make peak power between 6,000 and 8,000 rpm. Boosted engine combinations are actually more reliable making peak power in this higher rpm range, compared to making peak power around 6,500 rpm like most stock style intakes, provided the valve train is engineered properly. These units are available for a variety of applications from 1997 and up. Features and specifications for Equalizer 1 manifolds: * O-ringed port openings and lid surface * Easy insert steep chamfer injector bores for trouble-free injector O-ring insertion * Underslung plenum design for maximum hood clearance * 102mm profiled throttle bore * One map sensor location in rear, with two additional user optional locations * Additional user-defined LS3 and LS1, LS2, and LS6 map sensor bores * ISO9001:2015 certified machining * 2-piece design for easy porting access * Lightweight CAD-generated design * Profiled port openings for optimum out-of-the-box performance * All threads are roll form aircraft standard DSDV * Clears F-body cowls * Clears C5 cowls with minimal massaging to intake
( 5 )
$749.99
—
$799.99
$674.99
—
$719.99
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$514.95
—
$689.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$583.99
—
$669.99
First off, don't let the Jr. fool you--this Pro-Filer Sniper Jr. intake is just as good as its big brother! The Sniper Jr. intake manifold is optimized for engines 68 to 540 c.i.d. and larger with BBC cylinder heads such as Pro-Filer's Sniper and Sniper X with deck heights of 9.8 in. or 10.2 in. Yes, this is the intake those of you that race in a conventional head class have been looking for! They produce remarkable horsepower out-of-the box, with features such as cast injection bosses, 4500 Series carb flange, four corner water bosses, and exclusive as-cast ported plenum and runners, making this Sniper Jr. intake the best in BBC manifolds!
( 6 )
$749.99
On Sale
Holley EFI intake manifolds feature port-matched upper and lower runners for reduced restrictions. Plus, the EGR passages have been relocated to the outside of the manifold to allow for the use of larger intake ports. The result is greater air capacity, which makes these manifolds the perfect choice for supercharged engines. They're available in a variety of styles and options; select the model designed for your vehicle and/or engine application.
( 6 )
$682.95
$538.95
—
$724.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
