Free Shipping on Orders Over $109 at Summit Racing

PRW Dodge Cummins Rocker Arm Systems

PRW Dodge Cummins rocker arm systems are the perfect upgrade to provide more power and run your diesel engine more efficiently. Each rocker is made from alloy steel substantially stronger than stock. PRW Cummins shaft systems are manufactured to exceed OEM specifications as a "drop in" assembly using the stock arm ratios. The upgraded rocker arm systems are complete with everything you need, from ball adjusters and fasteners, along with silicon bronze bushings instead of OEM-style needled bearings for prolonged life expectancy. Note: some applications are pre-machined for high performance cylinder head stud kits.

3.0 out of 5 stars ( 2 )

$542.77

—

$679.93

Wiseco Crankshaft Kits

Wiseco crankshaft kits contain everything you need to complete your rebuild for a job done right, the first time! These crankshafts, connecting rods, bearings, and bottom end gaskets meet or exceed OEM specifications for the maximum horsepower and torque that every rider wants. Features include: * Double forged connecting rods feature shot peening, oil slots, and coated bronze thrust washers * Bottom end gasket kits are made from premium materials, exceeding OEM standards for an exceptional seal between critical mating surfaces * High-quality main bearings provide maximum life and smooth operation at high rpm * Surface treatment prevents corrosion and pitting, while adding strength to the assembly * Bushed top end of rod retains oil and eliminates pin galling * Case-hardened bottom end rod bores optimize bearing running surface * Hot rolled steel, case-hardened crank pin bearings * Caged needle roller bearings provide the highest possible rpm

5.0 out of 5 stars ( 2 )

$512.99

—

$561.99

ARB On-Board High Performance Twin Air Compressors

Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia

5.0 out of 5 stars ( 5 )

$659.95

Strange Door Car Steering Racks

Strange lightweight door car drag racing steering racks are manufactured using only heat-treated, high-strength hardened steel and aircraft grade billet aluminum, resulting in a silky-smooth turning radius and almost zero backlash. Available with either 19 1/2 in. or 24 1/2 in. tie rod centers, they feature hardened 4140 chromoly pinions that ride on a system of ball-bearings, delivering a seamless feel in the driver's hand with the confidence of durability and longevity. The steering box housing is CNC-machined from 6061 T-6511 billet aluminum for lightweight with extreme strength. Everything that goes into Strange door car steering racks--from the self-lubricating bronze bushings that allow the unit to move and flex smoothly to the dual lip pinion seal and heavy-duty, nylon reinforced neoprene boots that keep debris and moisture at bay--is top quality. Not only are the manufacturing specs very tight, but assembly tolerances are exceptionally close. Select the rack needed for your drag racer.

4.0 out of 5 stars ( 1 )

$702.99

Tilton 800-Series Floor Mount Pedal Assemblies

Tilton 800-Series floor mount pedal assemblies merge both the performance of their 900-Series technology and the renowned value of Tilton's 600-Series pedal assemblies. These floor mount pedal assembly units feature a high-efficiency spherical bearing type balance bar and pivot-mount master cylinder design. 800-Series floor mount pedal assemblies feature: * Forged aluminum pedals are engineered for high-rigidity and low-weight * Adjustable pedal ratios (5.29:1 – 5.75:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size * Foot pads can be adjusted vertically, horizontally, and in angle to suit individual driver preferences * Large diameter 7/16 in.-20 balance bar provides maximum rigidity; PTFE-coated aluminum clevises for increased durability and reduced friction * Pedal pivots feature wave washers to reduce lateral pedal movement; and oil-impregnated bronze bushings decrease stiction * Lightweight aluminum frame features guide "ramps" to reduce balance bar tipping—decreasing friction and improving brake repeatability

Not Yet Reviewed

$722.50

FAST XDi Race Cam Sync Distributors

FAST XDi Race Cam Sync distributors are an easy solution for those looking to provide an accurate cam sync signal to their aftermarket fuel injection system. Designed for applications that typically use a crank trigger, these distributors enable proper functioning of sequential fuel injection, individual cylinder spark timing, and fuel injector phasing—a must for maximum power and efficiency. Testing has shown the Hall-effect style optical pickup maintains a steady plus/minus 1/2 degree trigger signal, unlike competitors' inductive-style pickups prone to signal drift at high rpm. Ideal for drag racing, high-end street, and marine applications, FAST XDi Race Cam Sync distributors are constructed with a billet housing, precision-ground stainless shaft, and premium bearings. Hand-assembled parts also maintain consistent shaft end play, eliminating another source of triggering fluctuation. Each distributor comes with a precision-machined bronze gear and must be used with a crank trigger and external ignition box. These units are available for a variety of small and big block engine applications.

Not Yet Reviewed

$577.95

—

$662.95

ARB On-Board High Performance Air Compressors

Fully assembled and bench-tested ARB on-board high performance air compressors install into your vehicle and include a full, snap-together, fuse-protected wiring loom with solenoid plug-in contacts, mounting hardware with reinforcing bracket, and an OEM-quality compressor isolating switch. With the addition of an ARB-171302 pump-up kit (sold separately), they can be used to activate ARB Air Lockers, and perform other functions such as inflating camping gear. So what makes these compressors special? They're small enough to fit into even the tightest space and quiet enough to mount in the cab. They have enough output to air up four 35 in. to 37 in. tires in a single duty cycle and typically air up a 35 in. tire in just over two minutes. And, they work. ARB has tested these units in ovens, freezers, underwater, and in the silty dust of the Simpson Desert and they continue to perform. Features of ARB on-board high performance air compressors include: * Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply * Fully sealed components for moisture and dust protection * Over-pressure safety valve-equipped * Pressure switch-controlled air manifold system specially designed for ARB Air Lockers * Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life * Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing * Motor is internally thermal-protected against extreme temperature damage * Comprehensive-photo illustrated installation guide * Range of accessories available

4.83 out of 5 stars ( 6 )

$545.70

—

$669.75

Eagle H-Beam Connecting Rods

Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.

4.68 out of 5 stars ( 85 )

$586.99

—

$744.99

Zoom MU Series Clutches

Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation

4.31 out of 5 stars ( 242 )

$516.99

—

$748.99

Centerforce II Clutch Kits

Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.

4.6 out of 5 stars ( 50 )

$556.95

—

$587.95

Centerforce Dual Friction Clutch Kits

Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.

4.67 out of 5 stars ( 311 )

$587.95

—

$661.95

LuK Clutch Kits

Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.

4.42 out of 5 stars ( 384 )

$511.99

—

$635.99

Centerforce I Clutch Kits

Centerforce I clutch kits are designed to be high-quality, entry-level performance clutches for those in need of a superior stock replacement. Using the patented Centerforce centrifugal weights (where applicable) and premium friction materials, these Stage 1 clutch systems are perfect for applications with stock engines or mild power increases from minor bolt-on modifications.

4.61 out of 5 stars ( 31 )

$503.95

—

$577.95

South Bend Clutch Stage 2 Daily Driver Clutch Kits

South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.

3.17 out of 5 stars ( 6 )

$506.26

—

$682.01

South Bend Clutch Stage 2 Endurance Clutch Kits

South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings

3.0 out of 5 stars ( 3 )

$510.45

—

$747.59

South Bend Clutch Stage 1 Heavy-Duty Clutch Kits

Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.

4.82 out of 5 stars ( 17 )

$506.69

—

$705.81

South Bend Clutch Stage 2 Drag Race Clutch Kits

South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$519.71

—

$736.85

South Bend Clutch Stage 3 Endurance Clutch Kits

South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.

5.0 out of 5 stars ( 2 )

$669.46

—

$715.03

South Bend Clutch Stage 3 Daily Driver Clutch Kits

South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.

Not Yet Reviewed

$545.75

—

$734.56

South Bend Clutch Stage 3 Drag Race Clutch Kits

South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$702.01

South Bend Clutch Stage 4 X-Series Clutch Kits

South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$702.01

21 Results Found For "Bronze Bearings"