Availability
Showing In Stock Items. Show All 83 Items.
Briggs & Stratton 206 racing crate engines are factory-sealed long blocks with ground cams and controlled piston pop-up (reducing compression variance). These budget-friendly mills feature a simplified IKF/WKA rule set designed to maintain a stock configuration, right down to the factory-shipped carburetor jets. Simply put: the 206 engines even the playing field so that drivers can focus on the important task at hand--winning the race! Briggs & Stratton 206 crate engine features and specs: * Primary use: Karting, Microstocks, Jr. Drag Racing * Engines are assembled by hand in Milwaukee, WI using tooling and dies specifically designed for racing for unparalleled repeatability * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear * Cam ground, barrel-faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * .255 max. lift ground cam with nitrited lobes and built-in mechanical compression release * High-silicon, racing-engineered valve springs * High-grade stainless steel dished valves with nitrited exhaust * 3-piece, automotive-style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built-in 6,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom grafoil composition head gasket
( 7 )
$759.00
Briggs & Stratton Junior 206 crate engines are made tough! Each engine is hand-assembled in-house using tooling and dies specifically made for racing--for unparalleled repeatability. The factory-sealed long blocks include a ground cam and controlled piston pop-up (reducing compression variance). They're a simplified IKF/WKA rule set designed to maintain a stock configuration, right down to the factory carburetor jets. These 206 race engines are powerhouses! Briggs & Stratton Junior 206 race-only crate engine specs and features: * Primary use: for karting, high school/collegiate Supermileage Competitions * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear * Cam ground, barrel faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * .255 max. lift ground cam with nitrited lobes and built-in mechanical compression release * High-silicon, racing-engineered valve springs for seasons of racing * High-grade stainless steel, dished valves with nitrited exhaust * 3-piece, automotive-style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built-in 4,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom graph oil composition head gasket * Max Torque clutch, driver, and installation kit * Green premium air filter * Carburetor locking cap
( 1 )
$759.00
Building off the proven success of the Animal engine, Briggs & Stratton M-Series crate engines are the first dedicated racing engine engineered to meet the needs of the Quarter Midget market. Right out of the box, the M-Series is focused on the consistency and simplicity that racers expect. Briggs & Stratton race-only M-Series crate engine specs and features: * Performance and durability: Technology from OHV racing engineered to the specific needs of Quarter Midget racing * Assembled by hand and tested to strict quality standards * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear—and hardened splined output shaft for 6-1 gearbox (555721) * Custom top control plate firewall clearance * Cam ground, barrel faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * High-silicon racing engineered valve springs for seasons of racing * High-grade stainless steel dished valves with nitrited exhaust * Three-piece automotive style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built in 6,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom graph oil composition head gasket
Not Yet Reviewed
$759.00
What a great engine! What a mess of wiring! Telorvek GM Ram Jet wiring harnesses from The Detail Zone will clean up your engine bay! These replacement wiring harnesses let you move the controller and other components off of the intake. The Detail Zone Telorvek Ram Jet wiring systems can be used with any non-computer controlled transmission and include an optional O2 sensor and speed sensor wiring. TDZ wiring systems feature the necessary connectors with 20 ft. of fire-resistant, printed wire, so there's no guessing where they go, and adjustment of the wire lengths is easy for a super-neat installation. Plus, since everything plugs into the Telorvek panel, you can move your controller almost anywhere. These systems fit first generation GM crate engines with MEFI-3, or second generation with MEFI-4 controllers. Get rid of the fuel injection bird's nest! Replace it with The Detail Zone Telorvek GM Ram Jet wiring harnesses--great wiring for a great engine!
Not Yet Reviewed
$617.35
Schoenfeld truck fenderwell exit headers are the solution for your mud, off-road, or pulling truck. Manufactured from heavy-gauge steel to withstand the heat, these headers provide maximum ground clearance without exiting through the hood. They are available in multiple header flange styles to suit your exact build—order the application you need. (Special warning regarding Schoenfeld painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)
( 3 )
$592.99
COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.
( 5 )
$605.95
Centerforce billet steel flywheels are available for popular import and domestic vehicles, including trucks. They're CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installations. No modifications are required in combination with either Centerforce clutches or other clutch assemblies built to OEM specs. These rugged flywheels are SFI-approved, so you know that you can count on them--on the street and on the track.
( 60 )
$524.95
Lighter means quicker! Heavy flywheels rob power from your engine and reduce its ability to rev and respond quickly. McLeod's aluminum flywheels can take a big bite out of those losses. They're made from quality aluminum and come with steel-insert friction surfaces. Ring gears are held in place with welded and riveted tabs, and all flywheels are drilled to accept balancing weights for externally balanced engines.
( 8 )
$545.00
—
$595.00
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 30 )
$722.95
Nitrous Outlet EFI single nozzle systems come with more jets to set horsepower exactly where you want it. They include everything needed to add horsepower to your late model EFI vehicle--hardware, wiring, jetting, solenoids, hoses, and a nozzle. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. Get Nitrous Express race-proven systems because of their quality components and extreme performance.
Not Yet Reviewed
$839.99
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 219 )
$527.95
—
$549.95
PRW Platinum Series shaft-mount rocker arm systems fulfill the needs of successful racers and performance engine builders at every level. The Performance Quotient PQx rocker arms are made from quality alloy extrusions. These systems include CNC-machined billet steel pedestals, and ground, steel alloy rocker shafts—along with PRW SCM-4135 alloy steel fasteners, studs, and bolts. PRW Platinum Series shaft-mount rocker complete kits include all the components and hardware required for a professional installation. Order the system recommended for your specific vehicle and engine size. Features, items, and specs: * Several systems to suit many cam profiles * 8 pairs of shaft-mount rockers with adjustable cup-style valve lash adjusters * SAE 42100 full complement precision needle and cage roller bearings * Rated up to 750 lbs. open spring pressure * Internal oiling system for long-lasting performance
( 10 )
$779.24
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 141 )
$571.35
Speed-Pro forged pistons are made from extruded VMS-75 aluminum alloy that's forged under 3,000 tons of pressure to "near-net" shape. After that, they're machined to their final configuration. These pistons offer excellent strength and durability—and are capable of taking the punishment that's dished out on the street and in competition. They're available for a wide variety of applications, including OE replacements and all-out racing engines.
( 70 )
$557.99
—
$594.99
PRW offers Elite Series rocker arms for a variety of applications, including many Chevrolet, Ford, American Motors, Oldsmobile, and Pontiac vehicles from the 1930s and up. They incorporate an exceptional design that provides plenty of clearance for large diameter springs. These stud mount rocker arms are manufactured from premium quality 17-4ph stainless steel, a superior alloy that is high in nickel and chromium. This rigid premium material provides high yield strength to help resist deflection and has extraordinary fatigue resistance. PRW stainless steel rocker arms feature full cage friction-reducing needle bearings and extra-large trunnions to spread out the load and reduce wear. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to resist the severity of racing and to minimize scrubbing. Each rocker body is hand-polished, assembled, and carefully inspected to provide customers with some of the finest quality rocker arms available to the racing and performance industry. Each set of 16 comes complete with PRW poly locks. Product highlights: * Lightweight design * PRW poly locks included * CNC-machined pushrod cups * Heat-treated Cr40 steel rollers and shafts * Manufactured from 17-4ph stainless steel * Features full complement friction-reducing needle bearings * Wide assortment of ratios to suit almost any cam profile
Not Yet Reviewed
$505.48
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series forged 4032 alloy pistons increase your horsepower potential without busting the budget. Forged and machined with premium aircraft quality 4032 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application needs. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High strength piston wrist pins * Deep CNC valve reliefs
( 9 )
$669.95
—
$719.95
If you're pushing the envelope on your engine combination or need parts that will stand up to the demands of today's power levels, D.S.S. FX-Series forged 2618 alloy pistons will increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. The FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application. Key features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$699.95
—
$749.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 239 )
$599.95
You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.
( 295 )
$591.35
—
$781.68
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
$508.95
—
$620.95
No starvation! Canton Racing road race oil pans feature their competition baffling system of trap door baffles and/or slosh baffles. These systems flow oil to the pickup compartment and then keep it from flowing or sloshing away from the pickup during turns, acceleration, and braking. Their wide, low-profile sumps deliver maximum oil capacity and ground clearance. Many pans also include provisions for an optional pan mounted dipstick and a magnetic drain plug. Feed your engine with Canton Racing road race oil pans.
( 71 )
$509.00
—
$548.00
These Pioneer race balancers bring the advantages of bonded rubber to high-revving race and street/race applications where an SFI-approved balancer is required. Each balancer features a precision CNC-machined AUSI 1045 steel center bonded to an equally strong steel inertia ring. The advanced design makes these balancers very lightweight for all-steel products. The steel inertia ring on these models is positively protected against forward and backward movement and has the added assurance of bonded rubber to eliminate spinning. Every Pioneer race balancer features easy-to-read, computer-etched timing marks.
( 50 )
$516.99
—
$691.99
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 47 )
$699.95
—
$799.95
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 189 )
$642.54
—
$689.54
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
