Availability
Showing In Stock Items. Show All 40 Items.
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$592.00
$532.80
These Edelbrock Pro-Flo multi-point replacement calibration modules are exact replacements for Pro-Flo fuel injection systems. They are exclusively designed for the Edelbrock Performer RPM Pro-Flo EFI systems. The modules require a cord and adapter in order to hook them up to the electronic control module.
Not Yet Reviewed
$533.95
—
$594.95
MSD 6-BTM CD ignitions are ideal for engines with a turbo or supercharger. Not only will they benefit from full power CD sparks, but there is also an adjustable boost/timing retard circuit to prevent detonation. The dash-mounted control knob lets you easily adjust the amount of timing retard from 0-3 degrees per pound of boost pressure. Dial away engine-damaging detonation by retarding the timing in relation to boost pressure, and run on the threshold of detonation for maximum power and efficiency. You also get overrev protection from the soft touch rev control. They work with 4, 6 (even fire only), and 8-cylinder engines using a distributor. They include rubber shock mounts and 3,000, 6,000, 7,000, and 8,000 rpm plug-in rev limit modules.
( 24 )
$749.95
These MSD 6TN and 6ALN ignitions are the ultimate choices for superior performance in harsh racing conditions. With sturdy vibration mounts and CD circuits encased in a clear 2-part silicone elastomer, they are virtually vibration-proof. A specially designed, weathertight, 6-pin connector meets NASCAR's 20-6.1 ignition wiring rule and provides a tight, positive-locking connection with individual seals to keep dirt and moisture from each connection. The 6TNs are equipped with a special 4-pin connector that plugs directly into an MSD soft touch rev control, while the 6ALNs have a built-in rev control. These rev controls are adjustable with plug-in modules and will save your engine from overrev damage caused by missed shifts or driveline failures. They'll work with virtually any 4, 6 (even-fire V6 only), or 8-cylinder engines.
( 6 )
$522.95
Life is an adventure and Rockford Fosgate subwoofer solutions help you set the tone. Rockford Fosgate RZR Pro XP rear subwoofer solutions take your bass impact to a higher level by adding a secondary 10 in. subwoofer to your existing Pro XP Stage 4, 5, or 6 audio system with or without Ride Command. These complete waterproof solutions provide the ability to take your UTV into any environment. The subwoofer enclosure--vented to provide maximum bass performance--offers the ability to seal the vent when submerging the vehicle. The integral harness allows plug-and-play and requires no cutting or drilling by using OEM mounting points. Key features: * Element Ready to withstand the harsh outdoor environment * Plug-and-play wiring harnesses for select RZR models * Direct bolt into vehicle using OEM mounting holes * Sub enclosure integrates with no loss of passenger space * Vented subwoofer enclosure design for maximum bass performance * Port cap included to create sealed enclosure for tighter response or when submerging UTV * Color Optix lighting: Adjust your own bright, wide, and limitless lighting experience with the built-in Rockford Fosgate Color Optix plug-and-play controller and app. * Preset: Out of the box performance, literally. No settings or adjustments are needed. Pre-tuned by Rockford to deliver the legendary performance you have come to expect. * RF3 (Rockford Factory Fit and Finish): Designed and engineered to match and complement the factory fit and finish of your vehicle. These components are purpose built to the exact specifications to ensure the best-in-class fitment and look.
Not Yet Reviewed
$729.99
FiTech Go Shift transmission controllers are standalone electronic transmission control kits. If you plan on upgrading your transmission and you're having trouble with the wiring, back up lights, or shift points, the new Go Shift system is for you. Now you can have the luxury of a modern transmission for better response, better fuel economy, and overall reliability thanks to this system.
( 10 )
$599.00
Install smarter boost management with Turbosmart e-Boost 2! These electronic boost controllers give you ultimate control over the boost curve with smart features designed to get results. Engineered to win, Turbosmart e-Boost 2 boost controllers lead the class with 60 psi max boost operating pressure. They allow you to control, monitor, map, and compensate boost, plus control water spray, methanol or nitrous injection, manage shift/warning lights, and read/monitor rpm! Their state-of-the-art software is easy and logical to use, so you can confidently control all aspects of the boost curve--set point, gate pressure, and sensitivity. Whether you have a top-level racer or street-going vehicle, if it's turbocharged, make it Turbosmart-charged with Turbosmart e-Boost 2 boost controllers!
( 2 )
$518.99
—
$660.95
New Vintage USA 1947-53 GM truck gauge kits are complete ready-to-run sets. Direct from Detroit, USA, New Vintage GM truck gauges include everything needed to install period-inspired, original equipment styling with modern precision technology. The gauges in these NVU direct-fit packages are designed with Phoenix Direct Drive technology that takes the instruments to a new level and provides more features. Your 1947-53 Chevy/GMC truck project has found the perfect fit with laser-cut ABS brackets and original-style replacement bezels. Bolt up to original dash mounting points, wire them up, and off you go in authentic style with New Vintage USA 1947-53 GM truck gauge kits! More about the exclusive Phoenix technology: * Phoenix programmable speedometers and tachometers offer an unsurpassed amount of functions, tech, and style with an optimal amount of information displayed on high-tech mini OLED screens that are the same size as traditional odometer windows. * Direct Drive systems provide a better, easier way to wire multiple gauges, making your installation faster and trouble-free. You will no longer need to spend hours wiring up individual connections for each gauge. With NVU Direct Drive, installing your gauge package will be as simple as plugging into a port on the back of the driver gauge.
( 11 )
$648.58
—
$799.99
AutoMeter Chrono Chrome Series analog gauge kits are convenient, cost-effective, all-in-one solutions. These 5-piece kits include an electric speedometer, fuel, oil, water, and volt gauges with a unique three-dimensional dial design that gives added depth and style to your custom dash. Key features and points: * Short sweep electric fuel level, oil pressure, water temperature, and volt gauges with full sweep electric speedometer * Unique 3-D beveled dials with modern white LED illumination and flush mounted windows * AutoMeter's race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle * 12 and 16 V compatible to work with nearly every street car or race car electrical system * Speedometer has a simple push button, 2-mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination * Speedometer is compatible with most 2-wire sine wave and 3-wire hall effect vehicle speed sensors * Speedometer features lit LCD odometer capable of registering a million miles with two resettable trip odometers
Not Yet Reviewed
$666.99
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 1 )
$599.95
—
$728.95
Ride confidently with Garmin's Zumo XT2 motorcycle GPS navigator—built for adventure and fun. Its ultra-bright 5.5 in. display screen is glove-friendly, rain-resistant, and shows you the way, on and off the beaten path. The Zumo XT2 has a rugged build that's rough terrain-ready, with the ability to perform up to 6 hours on a charge. Explore the terrain and keep connected with GPS features that include: * Pre-loaded on and off-road maps * Birdseye satellite imagery and adventurous routing * Bluetooth-enabled to listen to your favorite music, get turn-by-turn directions, and hands-free calling through your connected helmet or headset * Rider alerts along your route for hazards, sharp curves, and speed changes * Live traffic and weather in real-time, and get phone notifications via Garmin Drive app * Incident notification text message to your pre-determined contact via Garmin Drive app and Bluetooth-connected device
Not Yet Reviewed
$599.99
Garmin RVcam 795 GPS Navigation Devices are available with or without a built-in dash camera. The 7 in. touch screen shows your route and includes detailed map updates of North America. Travel confidently along a custom route that's based on the size and weight of your rig. Overview of product features: BUILT-IN DASH CAM (some models): The integrated camera continually records 1080p HD video with a 140-degree field of view and automatically saves video of incidents. GPS data shows when and where events occurred, and the pre-installed memory card means this navigator is ready to use. VIDEO STORAGE: Saved videos are automatically stored securely in the online Vault and can be accessed by using the Garmin Drive™ app on your compatible smartphone. An active connection with Wi-Fi technology lets you share video clips with others by sending a link and passcode. FORWARD COLLISION WARNING: o help increase driver awareness, forward collision warnings notify you if you're driving too closely to the vehicle ahead. Certain conditions may impair the warning function. LANE DEPARTURE WARNING: Enabled by the built-in dash cam, the lane departure warning alerts if you drift off the road or into oncoming traffic. VAULT SUBSCRIPTION: Your saved dash cam video clips are stored in the secure online Vault for 24 hours from the time of upload. Garmin also offers extended storage plans via paid subscription. * LARGE 7 in. GPS NAVIGATOR SCREEN * CUSTOM RV ROUTING * ROAD WARNINGS * BIRDSEYE SATELLITE IMAGERY * ROADTRIP ROUTES FEATURE * RV PARKS AND SERVICES * EASY TRIP PLANNING * TRAVEL PLAZA LOYALTY PROGRAMS * GARMIN VOICE-ASSIST * WIRELESS UPDATES * LIVE TRAFFIC AND WEATHER * LIVE FUEL PRICES * HANDS-FREE CALLING * SMART NOTIFICATIONS * TRAVEL INFORMED * NATIONAL PARKS * TRENDY PLACES FEATURE * LOCAL SPOTS FEATURE * MAP COVERAGE * WORKS WITH BACKUP CAMERAS * CONTROL 12 V ELECTRONICS
( 1 )
$599.99
Clearance
Garmin Montana 750i handhelds combine the flexibility of on or off-road navigation with global messaging and interactive SOS via inReach satellite technology, plus a built-in 8 megapixel camera. A full QWERTY keyboard lets you easily type messages. Montana 750i handhelds are built rugged, meeting MIL-STD 810 standards for thermal, shock, water, and vibration. Available inReach weather forecast service provides detailed updates directly to your Montana handheld or paired devices, so you'll know what to expect en route. Use preloaded topographical maps to view contours, elevations, coastlines, rivers, landmarks, and more! See the world, stay in touch and be the picture of adventure with Garmin Montana 750i handhelds—born to explore and built to endure. Key features include: * Rugged by design to be water-resistant and features 5 in. touchscreen * Built-in 8-megapixel camera geotags photos with coordinates so you can navigate back to favorite sites in the future * City navigator maps seamlessly transitions from trails to road to guide you with easy-to-follow turn-by-turn directions * Preloaded Topoactive maps for the U.S. and Canada * Birdseye satellite imagery (no annual subscription required) to see realistic views and creates waypoints based on landmarks * ABC sensors to navigate the trails, including an altimeter for elevation data, barometer to monitor weather and 3-axis electronic compass * Active weather uses cellular connectivity to access up-to-date active weather forecasts (using Garmin Connect app) * Dog tracking for hunters and trainers (syncs with compatible Astro or Alpha series handhelds (sold separately) * Multi-GNSS support * Tracking using your web-based MapShare trip-sharing page, followers can see your progress, ping your device to see your GPS location and exchange messages during your trip * Expedition mode to trek far and wide off-grid * Internal, rechargeable lithium-ion battery pack provides up to 18 hours of battery life in GPS mode
Not Yet Reviewed
$674.99
$600.50
When it's time to hit the trails, be prepared with Garmin GPSMAP H1 navigation devices. These rugged GPS handheld navigators have a modern design, preloaded maps, and incredible battery life. Garmin GPSMAP H1s feature a hybrid design with a 3.5 inch color touch screen and physical buttons. The touch screen has chemically strengthened glass to resist scratches and is glove-friendly, while the intuitive push buttons offer versatility when operating in different weather situations wearing gloves. The H1 navigation devices use multi-band GPS and multi-GNSS support to help pinpoint your precise location, and each unit is built for adventure meeting MIL-STD 810 and IP67 ratings to withstand water and extreme temperatures, and providing a bright built-in LED flashlight and a loud siren to draw attention if you need help. In the box: * GPSMAP H1 * Loop carabiner * Charging/data cable * Documentation
Not Yet Reviewed
$699.99
With Garmin's RV 895 GPS navigation devices you'll travel with a large display, custom routing for the size and weight of your rig, plus vivid aerial views to help you with a smooth arrival at your RV park or campground. The large 8 in. GPS navigator features a bright, high-resolution edge-to-edge touch screen display, so you can easily see important information displayed in landscape or portrait mode. And you will go in the know with Garmin voice assist, live traffic, weather, and even fuel prices. You can get information for restaurants, attractions, and local spots to visit along your route or near your destination. Travel confidently and know what's ahead; get your adventure rolling with Garmin RV GPS navigation devices. In the box: * RV 895 * Vehicle suction cup with powered magnetic mount * Screw-down mount * 1 in. ball adapter with AMPS plate * Vehicle power cable * USB cable * Documentation
Not Yet Reviewed
$699.99
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 328 )
$549.95
—
$799.95
Clearance
Pure Energy remanufactured turbochargers are built to the strictest quality standards, implementing design enhancements that improve durability, efficiency, and power. These stringent testing and evaluation processes assure proper performance and reliability standards are met. Pure Energy turbochargers are supported by a free tech support hotline, staffed by ASE certified master technicians with access to extensive vehicle-specific repair data. Quality enhancements include: * Precise dual plane balancing of turbine shaft and compressor wheel eliminates high-speed vibrations, premature shaft and bushing/bearing failures, and assures quick spool up * New OEM design or upgraded CHRA (Center Housing Rotating Assembly) internal components assure reliability and durability * Thrust plates, seating rings, and journal bearings are strategically designed to withstand internal oil pressure and improve lubrication * Electronic and pneumatic actuator function is tested, calibrated, and adjusted for proper pressure relief and boost functions * Mechanical fastener and tolerance verification—all critical points are measured, gauges, torques, and witness marked * Assembly line and end-of-line testing--multi-computer and mechanical test operations monitor the turbo performance
Not Yet Reviewed
$658.99
—
$1,144.99
$501.50
—
$699.50
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$541.99
FuelTech FT450/550 Sportsman Datalogging A harnesses are designed around a Big Block Chevy, yet these harnesses have extra-long leads that allow them to be used in numerous other applications. They provide a plug-and-play solution to easily incorporate datalogging into any setup equipped with an FT450 or FT550 ECU. These harnesses come pre-terminated to plug directly into essential data logging input channels and have an extra input connector to add up to two more configurable inputs for sensors or buttons. They're also equipped with two extra connectors that allow the use of 10 outputs to control EFI fuel Injectors, ignition control through a CDI box with points input or smart coils (eight coils on wasted spark is not recommended for carbureted V8 applications). Tech specs: * Harness is set up for either VR or Hall effect cam and crank sensors and includes two relays with built-in fuses for main electronics, injectors, and coils * FT450 connector (FT550 A connector) * CPC firewall connector * Each connector has its own label and harness insulation is heat, moisture, and oil-resistant * Pre-terminated connections: for Wide Band 02 Sensor x2, Oil Pressure, Fuel Pressure, Engine Temperature and Transmission Temperature * Drive shaft sensor/2-step connector * Extra Inputs connector: 2 configurable inputs for sensors or buttons * Extra Outputs connector: For DIY expansion to control EFI fuel injectors or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Ignition Expansion Connector: For DIY expansion to control ignition or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Comes with two 40A relays and fuses to power everything—the relays power the ECU, Wideband Nano O2, Peak and Hold drivers, sensors, and extra connectors Contents of package: * Harness and instruction manual
Not Yet Reviewed
$799.00
Choose EFI main power wiring harnesses from Holley to meet your needs. Several choices are offered—TBI, LS applications, multi-point, and un-terminated harnesses—to feed and carry your engine's electrical supply. Get wired for electronic fuel injection with Holley EFI systems main wiring harnesses.
Not Yet Reviewed
$549.95
—
$574.95
Wiring Specialties Pro Series LS1 Engine wiring harnesses offer the best in aesthetics, weight savings, and reliability. Designed specifically for your throttle cable driven LS1 equipped ride, these harnesses look as good as they function. Even better, the installation is simple and efficient! Check out the features and benefits, then completely replace your old harness and forget about electrical gremlins—thanks to Wiring Specialties Pro Series harnesses. Pro Series features and benefits: * Plug-and-play installation: The engine requires only 3 wires to be connected—starter signal, ignition signal, and fuel pump * No cores and additional wiring required * Integrated coil pack harnesses included * Standalone 5-circuit Bussmann fuse/relay block provided; no connections to OEM fuse boxes required * Circuits provided: Ignition, Fuel Pump, Fan1, Fan2 and A/C relay * Proper gauge wiring support for dual, 30 amp, PCM-controlled cooling fans * Point-to-point digital test on every wire * Constructed using OEM connectors and TXL Automotive wire with OEM colors * Made with high temp TXL wire (-40C to +125C operating temperature) with adhesive shrink tubing * ThermaShield 1,200F Aluminum/Fiberglass connector protection provided for knock sensors * Wrapped in lightweight nylon loom with -94C to +257C operating temperature * They have integrated transmission harnesses, and allow for more customization when selecting options like ECU, injector, and AFM connectors * They use high-temperature braided sleeving, and are built to exceed OEM specs for wire temperature rating, quality, and power/ground routing * The harnesses are designed from the ground-up for performance, optimization, and modularity, plus they're "tucked" for a clean professional appearance * Developed in-house on actual engines to ensure a perfect fit to the engine and chassis * Wiring Specialties use an OEM-style wiring construction process—they utilize hydraulic crimping machines that crimp wire and terminals with over 2000 lbs. of force * All harnesses undergo a wire-to-wire electronic test after assembly, to ensure that no wire pinout mistakes were made during assembly
( 1 )
$819.00
Okay, yes, there are times you wish you could have that signature turbo blow-off sound, but not all the time. Go Fast Bits Deceptor Pro II TMS direct-fit motorized blow-off valves deliver just what you need—the ability to control how loud your BOV sound is, from the driver's seat. Featuring GFB's patented Venting Bias Adjustment System, coupled with remote electronic control, Deceptor Pro II units allow you to infinitely vary how much air is recirculated, and how much is vented to atmosphere. So, if your car typically suffers issues, such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues. GFB Deceptor Pro II features and benefits: * Adjust your BOV venting bias electronically on-the-fly * Revised porting to optimize flow and venting bias * Compact design fits in most factory valve locations * Bore finishing process ensures a lifetime of reliable operation * Direct bolt-on for most vehicles available * Remote proportional venting bias/volume control- from silent to loud or anywhere in between * Sleek, compact in-car BOV volume controller with backlit dial * End-point adjustment to control maximum vent to atmosphere bias setting * Volume adjustment mechanism driven by a high-torque geared electric motor * Durable, low-friction gear train supported by precision sealed ball-bearing * Supplied with all parts and wiring required to have it up and running quickly and easily
Not Yet Reviewed
$805.50
Computech RaceAir Pro weather stations are competition weather analyzers and computers that will help you perfect your setup for the variable conditions around you. These top-of-the-line all-in-one electronic drag racing weather stations utilize highly precise digital sensors to detect even the smallest changes in atmospheric conditions that will impact your tuning and ET prediction decisions. They feature internal fan and automatic air sampling to provide highly accurate and repeatable results. RaceAir Pro features multi-line LCD displays that provide weather data and calculated values. Also extensive programs for drag racing, circle track, road racing, tractor pulling, and karting--all of which are accessed through the user-friendly keypad--no computer is necessary. One thing that will directly impact your racing performance, but you have no control over is the weather--especially when your day racing turns into night racing. Computech RaceAir Pro Weather Stations allow you to account and adjust for these changes to maintain racing consistency and success. Calculations and formulas: * Dial-in programs - Single run ET prediction - Database ET prediction * Throttle stop program * Multiple car prediction * Run completer * Test and tune - Holley - Precision jets - Fuel injection - Blower overdrive - Mikuni jets - Keihin jets - High speed - Square area * Drag racing performance - Full run standardizing - Intermediate run - Estimated 1/8 and 1/4 mile hp - Estimated ET and mph * Drag racing formulas - Gear ratio - Trap rpm - Converter slippage * Engine builder formulas - Calculate ratio - Calculate and pour chamber - Calculate and pour dome * Circle Track formulas - Gearing and tires - Engine rpm vs tire/gear change - Gear ratio - Tire size - MPH calculator - Tire stagger * Chassis setup by weight and percent * Fuel mileage * Liquid weights
( 5 )
$749.95
Altronics PerformAIRE weather stations are motorsports' most accurate and only patented air-quality computers. They monitor temperature, absolute barometric pressure, and relative humidity through their state-of-the-art electronic sensors. This information is transmitted into a microprocessor, where density, altitude, and predicted values are calculated and displayed. They offer incredible accuracy through exact scientific equations, formulated specifically for internal combustion engines.
( 12 )
$774.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
