Availability
Showing In Stock Items. Show All 84 Items.
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$573.95
$515.95
On Sale
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$599.95
$538.95
On Sale
BD Diesel Xtruded transmission oil coolers use the same high-efficiency micro-extruded bar technology that is in the BD Diesel air-to-air charge coolers, providing 22 percent more cooling over similar designs. Their 200 micro-extruded passages provide a large surface area to transfer heat for external airflow cooling, while their turbulent oil design promotes more complete cooling. They feature large 5/8 in. ports to prevent inlet/outlet restriction and furnace-brazed rails that have been tested to 300 psi of pressure. Their thermostatically controlled 80 watt, 10 in., 800 cfm electric fan offers automatic oil temperature control. The BD Diesel Xtruded transmission oil coolers are available to accommodate 5/16 in., 3/8 in., 1/2 in., or 5/8 in. transmission cooler lines and come complete with all fittings, clamps, hoses, a wiring harness with a relay and fuse, and mounting hardware. And, you can build your own bracket kit for an easier installation.
Not Yet Reviewed
$723.95
—
$735.95
$651.56
—
$662.36
On Sale
Greater performance and thousands of miles of engine life will be added by keeping a "cool" coating of oil on high-wear engine components, such as piston rings, piston skirts, cam bearings, and rod bearings. Stillen Setrab oil cooler kits for race or street offer a temperature reduction of 30 to 40 degrees F, ending the oil overheating condition and preventing a reduced power mode. They allow hot oil to be circulated and cooled outside of the motor through a high efficiency cooler. Stillen Setrab oil cooler kits are an absolute must for forced induction or track use. Select the kit designed for your vehicle. Features and benefits: * Increases oil capacity * Helps prevent engine oil from overheating * Swedish-made Setrab oil cooler core renowned for their excellent cooling abilities * Goodridge stainless steel lines, necessary fittings, hoses, and hardware * Vehicle-specific bracket * Thermostatic bypass plate prevents overcooling of oil
Not Yet Reviewed
$671.91
—
$679.18
$537.53
—
$543.34
On Sale
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 192 )
$588.54
—
$598.54
$538.54
—
$548.54
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$577.99
—
$682.99
$527.99
—
$632.99
On Sale
Built for power and show, K&N 69 Series Typhoon cold air intake kits are engineered to dramatically reduce intake restriction, resulting in additional horsepower and torque. These air intake kits primarily feature a free-flowing, mandrel-bent aluminum tube induction system designed to fit many performance vehicles. The Typhoon kits come in one of three designs: cold air intakes, short ram intakes, or complete cold air intakes—which can be configured as either cold air or short ram intakes. Some air intake models feature high-quality tube and end cap finish options, including polished aluminum, and black, blue, red, or silver powdercoated, among other options. Order the K&N 69 Series Typhoon cold air intake kit that is suited to fit your vehicle application.
( 462 )
$629.99
—
$839.99
$579.99
—
$789.99
On Sale
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$573.00
—
$657.00
$515.70
—
$591.30
On Sale
Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 648 )
$530.54
—
$702.54
$505.54
—
$677.54
On Sale
K&N 77 Series high-flow performance cold air intake kits are aftermarket air induction kits designed for trucks and sport utility vehicles. They include a free-flowing, mandrel-bent intake tube (various materials and color options) with a Million Mile Warranty. K&N 77 Series cold air intake kits replace your restrictive factory air filter and intake housing, maximizing your power and acceleration. They include a washable, reusable air filter and offer guaranteed performance for their vehicle applications.
( 479 )
$839.99
$789.99
On Sale
APR PEX intake systems are attractive high-performance upgrades designed to increase performance by letting the engine breathe more freely. Their closed airbox design rejects power-robbing heat from the engine bay thanks to the high-heat deflection material used, and it provides an unrestrictive path for cold, dense air fed from outside of the engine bay to maximize power. A high-flow, reusable filter provides excellent filtration without the restrictions, which keeps the engine clean while optimizing power delivery. APR PEX intake systems recorded a 31 percent cfm improvement over the factory airbox, which translates into a sharper throttle response, lessened strain on the turbocharger, and more horsepower and torque. Offering an excellent value, PEX systems install in minutes, looks fantastic, deliver a sporty engine note, and is recommended at all stages of performance.
Not Yet Reviewed
$799.95
$718.95
On Sale
aFe Track Series carbon fiber Pro 5R air intake systems are open-element designs displaying massive air filters and carbon fiber intake tubes. Laid out to fit each specific make and model available, the systems outflow factory intakes, deliver a more aggressive sound, and add plenty of style for under your hood. aFe Track Series carbon fiber systems may feature: * Lightweight high-gloss, clearcoated 100 percent twill weave carbon fiber tubes * Large pre-oiled Pro 5R 5-layer washable/reusable high performance air filter * Stainless steel clamps, silicone couplers, and hardware * Housings made from XLPE (cross-linked polyethylene) polymer minimize warm engine air for maximum performance * Aluminum heat shields are one-piece, lightweight, and powdercoated black—block performance-robbing engine heat * Unique (patent-pending) filter-to-housing interface using fewer parts than traditional systems for a hassle-free installation
( 3 )
$714.00
—
$877.80
$642.60
—
$790.02
On Sale
Upgrading your vehicle's restrictive stock air box with Stillen air intake kits will allow for increased airflow, which can help your engine breathe better and more efficiently. Air intake systems, also referred to as cold air intakes, are popular performance modifications that can be installed on many vehicle classes, ranging from high-performance sports cars to hard-working diesel trucks. These air intake kit components are designed to replace your vehicle's factory intake assembly with aftermarket intake tubes, air boxes, and filters to overcome restrictions in the intact tract, thus allowing more air to enter the cylinders. With an air intake kit by Stillen, you can expect to see a positive effect on horsepower, torque, and acceleration, as well as improved fuel economy—and that makes Stillen's air intake kits your best dollar-per-horsepower investment by far! Upgrading your vehicle's air intake can provide several benefits, including: * Improved fuel economy—cold air intake systems can improve your vehicle's air-to-fuel ratio, which can lead to better gas mileage. * Better acceleration, cold air intake systems can improve your vehicle's responsiveness and acceleration speed * Increased airflow—upgrading your air intake can allow for increased airflow, which can help your engine breathe better and more efficiently * Enhanced engine sound—increased airflow can create a sought-after engine roar * Better air filter life—aftermarket air intakes often come with washable, reusable air filters that can last longer than standard dry filters * Reduced engine wear—increased airflow can reduce wear on your engine * Engine longevity—upgrading your air intake system can enhance the longevity of your engine
Not Yet Reviewed
$633.44
$506.75
On Sale
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$629.99
$579.99
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 143 )
$649.95
—
$849.95
$552.95
—
$693.95
On Sale
MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Coil bracket -- Uses a bolt/nut combination instead of the easily stripped self-tapping screw * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector
( 2 )
$699.95
—
$749.95
$628.95
—
$673.95
On Sale
Hooker LS turbo exhaust manifolds allow a simpler way to add a turbo to your muscle car. Made from high-silicon-moly ductile iron, these manifolds are much more durable and retain more heat than fabricated headers. The manifold kits include stainless steel V-band clamps and flanges, heater hose heat shield, and header bolts. A turbo crossover tube is used to connect the two manifolds (sold separately). Hooker LS turbo exhaust manifolds are offered for driver and passenger side individually or as a set—and they work with most common LS swap parts (i.e. motor mounts, swap oil pan, and accessory drive systems) to provide the basic building blocks needed to complete a custom turbo system for your GM LS engine.
( 11 )
$689.95
$619.95
On Sale
Hooker Blackheart LS swap exhaust manifolds provide stainless steel versions of their popular cast iron lineup of LS swap exhaust manifolds based on the 8502HKR family. The new stainless steel manifolds offer several advantages over the cast iron versions, including increased durability, reduced weight, and improved corrosion resistance. The shorty tight-tuck design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. Available in both natural cast (factory look) and polished, Hooker Blackheart LS swap exhaust manifolds include all the necessary hardware (gaskets, bolts, and flanges). More product features include: * 2 1/2 in. outlet diameter offers improved flow for maximum performance from a cast exhaust manifold * Tight-tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance * Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware * Stainless Steel construction for unmatched durability and corrosion resistance * Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
( 3 )
$599.95
$538.95
On Sale
Holley improved the carburetor that powered thousands of racers into the winner's circle—Holley Ultra XP 2-barrel carburetors. They used the original 0-4412 and added the proven design elements of their Ultra Series delivering the XPs with more tunability, more durability, more weight savings, and more features! They are approved for use in NASCAR Mid-West/West Coast Late Model Divisions and utilize the same venturii and throttle bore dimensions of the classic 2-barrel carburetor. Holley Ultra XP carburetors are available in different finishes, and will outperform any production 2-barrel available. Features include: * All-aluminum construction for nearly 50 percent weight savings over zinc versions * Tumble polished aluminum with Black billet aluminum metering block and base plate * No choke tower for unobstructed airflow * Air bleeds moved outward to allow a smoother transition of airflow * Air cleaner flange centered over venturii for improved airflow and performance, 5/16 in.-18 bent air cleaner stud included * Down-leg boosters for improved fuel signal * Contoured hex head squirter screw for streamlined airflow * Internal pump passage on metering block equipped with tunable bleed off * Same original 1 3/8 in. venturii and 1 11/16 in. throttle bore size and throttle plate/shaft size * Fuel bowl provides 20 percent more fuel capacity while controlling slosh with internal baffling * Clear sight windows on both sides of bowl for easy and safe fuel level adjustments * Fuel trough designed into floor of bowl to route fuel flow directly to the jets and assists in keeping jets covered by fuel * Built-in drain plug provides easy access to empty contents of bowl * -8 (O-ring) inlet threads offer a large variety of plumbing options (come with an extended -8 O-ring to -8AN male adapter and -8 plug). Can be plumbed from either side * Throttle shaft rides in oil impregnated sintered bronze bushings for smooth throttle actuation * Throttle shaft capped to prevent entry of debris and contaminates * 30cc pump with metal lever. Anti-siphon valve in main body to reduce pump pull-over * Dedicated race-only throttle lever with all unnecessary street attachment points and tangs removed * Knurled (hand adjustable) curb idle screw allows for easy idle adjustment without the use of tools * Set screw for wide open throttle stop adjustment * Wedge float provides fuel control while cornering * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run!
( 6 )
$799.95
$718.95
On Sale
Hooker BlackHeart LS turbo exhaust manifolds are the simple solution for adding a turbo to your muscle car. They're made from high-silicon-moly ductile iron and are much more durable than fabricated headers. They're available with a black or silver ceramic coated finish. These manifolds are part of a full line of LS swap components (i.e. motor mounts, swap oil pan, and accessory drive systems) and provide the building blocks needed to complete a custom turbo system for your GM LS engine. Additional details: * Designed for use with LS swap applications and components * 3 in. V-band outlet – 2.25 in. V-band crossover connections * Heat shield to protect heater hoses * Hardware included: Stainless steel V-band clamps, V-band flanges and header bolts * High-silicon-moly ductile iron construction provides durability and corrosion resistance * A turbo crossover tube is available for manifold connection (sold separately) * A universal crossover component kit is also available for custom applications (requires fabrication and welding)
( 2 )
$799.95
$718.95
On Sale
MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.
( 93 )
$579.95
—
$632.95
$520.95
—
$568.95
On Sale
Hooker Super Competition Block Hugger headers are a great choice for your custom car, truck, or rod. Ideal for applications where the frame rails are close to the engine block. These headers feature a tucked-in tube design that's perfect for those tight-fit installations! Mandrel-bent, tuned-length primaries decrease backpressure and increase exhaust velocity, improving horsepower, torque, and throttle response. Their collectors are positioned for maximum starter and engine mount clearance; and exit parallel with the oil pan rail to allow for maximum ground clearance. Hooker Super Competition Block Hugger headers come complete with the gaskets, header bolts and collector reducers needed for a successful installation.
( 27 )
$649.95
—
$699.95
$583.95
—
$628.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 241 )
$599.95
$538.95
On Sale
Holley EFI Gen III Hemi single plane intake manifolds provide maximum hood clearance combined with plenum and runner geometry that provides a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The isolated design of the air/fuel passages helps to increase charge air density and performance. Holley EFI Gen III Hemi single plane intake manifolds are great for turbocharger, centrifugal blower, or NOS power adders. Features: * Minimum carburetor flange height for maximum clearance to hood * 4150-type throttle/carb flange * Cast aluminum construction * Billet fuel rails * Billet aluminum oil fill cap * Mounting brackets for use with either Bosch EV1 or Gen III Hemi OEM fuel injectors * O-ring seals around ports * Natural or black finish available
( 2 )
$630.95
—
$649.95
$566.95
—
$583.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
