Availability
On Sale
Aeromotive continuous duty Eliminator fuel pumps support big horsepower and maintain the driveability necessary for a true high performance street car. Designed for high horsepower street/strip applications, EFI, or carbureted, they feature Aeromotive's "dual chamber" pumping mechanism. The pumps are available in external or in-tank models. Additional features include: * -12 AN O-ring boss inlet port and -10 AN O-ring boss outlet port * Fully submersible for custom in-tank pump placement * 25 percent more flow at pressure than Aeromotive A1000 fuel pump * Supports naturally aspirated EFI engines up to 1,900 hp * Supports forced air induction EFI engines up to 1,400 hp * Supports naturally aspirated carbureted engines up to 2,300 hp * Supports forced air induction carbureted engines up to 1,700 hp
( 2 )
$801.55
$649.85
On Sale
Aeromotive 1988-97 Chevy Truck Dual 340 in-tank fuel pump modules are direct drop-in units for the specified years of GM 1500/2500 V8 trucks. Featuring dual 340 lph pumps, they can support up to 1,400 FWHP on gas/fuel injection/forced induction and up to 980 FWHP on E-85/fuel injection/forced induction. 100 micron pump pre-filters are included. Additional features: * No drilling required for installation * Individual wiring terminals for each pump to accommodate a staged system * Single -08 ORB outlet port for easy plumbing * Outlet, return, and vent ports include -08 90-degree swivel fittings * Vent port adapter fitting * 0-90 Ohm fuel level sender
Not Yet Reviewed
$725.70
$653.13
On Sale
Aeromotive Phantom 300 universal diesel fuel pumps offer the classic Phantom design with Aeromotive's cutting-edge fuel delivery technology for the diesel market. Designed for racing applications, the Phantom 300s will ensure the consistent flow you've come to expect, and they are available in single and dual pump models. Choose the one your prefer. Specs and additional features and benefits: * Single pump flow ranges: -- Low range 81.98 gal./hr. at 16 psi, 7 amp, 13.5 V -- High range 37.5 gal./hr. at 100 psi, 14 amp, 13.5 V * Dual pump flow ranges: -- Low range 163.96 gal./hr. at 16 psi, 7 amp, 13.5 V -- High range 75 gal./hr. at 100 psi, 14 amp, 13.5 V * In-tank gerotor pump stays cooler and quieter than an exterior pump * Has a higher flow than most factory lift pumps * Extended bracket length allows for installation in deeper tanks (6 to 20 in.) * 300 micron pre-filter is included
Not Yet Reviewed
$693.35
$624.02
On Sale
Waterman Racing Standard Sprint gear fuel pumps are available in multiple configurations. They're designed and machined from forged aluminum—and house machined steel shafts and precision lapped gears. Select the pump with inlet/outlet ports and GPM flow rate needed for your application.
( 1 )
$651.99
—
$718.99
$586.79
—
$647.09
On Sale
FUELAB Prodigy variable speed brushless in-tank fuel modules have been developed for racing, and are also fully capable of street use. They're compatible with gasoline, E85, methanol, or diesel fuels. The modules can be coupled with FUELAB's electronic fuel pressure regulator, bringing high-flow capacity with automatic demand speed control (no programming, calibration, or additional control boxes required). Prodigy in-tank fuel modules work with FUELAB's unique sealed flange system for fabricators and vehicle-specific applications. The flanges allow for installation into steel or aluminum fuel tanks, fuel cells, and factory stock fuel tanks. No more patching and strapping multiple pumps together on a hanger … no more splicing tee fittings, hoses, and wires inside your tank … no more potential engine damage if a pump in a multi-pump setup fails. These modules include auxiliary outlets for optional use of jet pumps. Jet pumps allow transfers of fuel within the fuel tank for tough situations such as saddle tanks or internal sumps and baffles. They also provide a cleaner installation by hiding the straining filter and pump. Installation time is quicker and more affordable, with less fuel system components to mount.
( 2 )
$628.00
—
$666.00
$565.20
—
$599.40
On Sale
Waterman Racing is proud to introduce their Late Model Micro Midget gear fuel pumps! Close tolerances are the key to all of Waterman's line of fuel pumps. The Meehanite gears are coated with polymer and hand-lapped to match the wear plates for tight clearances. Carbon bearings are used and matched with heat-treated shafts for longevity. Housings feature hard-anodized gear pockets, as in all the Waterman pumps; and the standard 3/8 in. hex drive with swivel flange offers easy installation. In addition, these pumps weigh 1 lb. 3 oz. (3/4 of a pound lighter than any other standard late model pump!) and overall length has been shortened to a mere 3-inches! Select the model with flow rate best suited for your vehicle.
Not Yet Reviewed
$669.99
—
$698.99
$602.99
—
$629.09
On Sale
When electric just isn't enough, it's time to move to a more efficient method of delivery like the Ultra-Lite Sprint gear fuel pumps from Waterman! They've taken the same Sprint fuel pump that's well-known for low maintenance/high-performance dependability and made some cosmetic changes. Waterman has intricately scalloped the front cover, pump body, and swivel flange, in addition to rifle-boring the shafts. When combined, these changes equate to not only a substantial reduction in weight—but a new sleeker look! This updated design has also found a home with the Import crowd. The Ultra-Lite pump still has the exact internal workings (including machined steel shafts and precision lapped gears) as the original Sprint pump, so you know you're bolting on a quality product with a proven track record! Each pump is flow-tested (hand-written flow data sheet included) to ensure optimum performance and then shipped "race ready" Order the flow rate and model best suited for your vehicle.
Not Yet Reviewed
$760.99
—
$830.99
$684.89
—
$747.89
On Sale
Aeromotive VaporWorx Ally PWM fuel pump controller kits allow a second pump to be added to an OEM fuel system control module without causing overloading of the stock FSCM. They are compatible for use with positive trigger OEM fuel system control modules when using an aftermarket standalone fuel pump. For clarity, there are many names for the modern OEM fuel pump driver/fuel computer, but all basically do the same thing; communicate with the ECM to drive the fuel pumps at the speed needed to provide the requested fuel pressure. Most aftermarket ECMs do not have this capability and unfortunately, many OEM fuel system control modules (FSCM) can handle one high-power pump, but not two or more. So, in the search for more power, and to keep the FSCM working, it needs help. That's where VaporWorx Ally PWM fuel pump controller kits come in. These Ally kits allow positive pulse FSCMs to control the primary pump, while the VaporWorx Ally Auto-On controller "piggybacks" and takes care of the other pump(s). The controllers do not turn on the other pumps until approximately 3 to 4psi of boost by using the engine MAP sensor or a VaporWorx standalone MAP sensor as the turn-on trigger. The Ally solution provides sufficient power for all fuel pumps while maintaining the FSCM full CAN feedback and diagnostics, and all pumps will effectively be under the control of the FSCM. Kits are available for naturally aspirated and supercharged applications. Select the kit best suited to your setup. Features: * Everything needed electrically to drive additional fuel pumps -- No hard-to-get connectors, multiple fuses, Hobb's switches, etc. * A 2/3 reduction in power to the fuel pump during idle and cruise vs. traditional systems means long OEM pump life expectancy * 50-amp minimum continuous power rating in a compact controller package * Progressive 2/3 pump ramping strategy lowers the load on the FSCM to reduce MIL codes * Soft-start feature to reduce initial pump-on pressure spikes * Can use either the engine MAP sensor or a VaporWorx standalone MAP sensor * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * Cross-linked polyethylene wiring * UL94 rated components used throughout * Allows all the OEM ECM priming and safety systems to remain functional * Can be used with one or two extra/auxiliary pumps * 10 to 22 V operating capacity
Not Yet Reviewed
$577.15
$519.44
On Sale
Aeromotive VaporWorx Ally Returnless PWM (Pulse Width Modulation) electronics kits for the KPM1500 fuel pump include the necessary parts to modify the KPM1500 (not included) to make it work properly for FSCM (fuel system control module)-equipped vehicles and aftermarket ECM/FSCM systems. The weakness of the OEM FSCM is power capability--they can drive one high-power pump, but not two. That's where VaporWorx Ally PWM kits come in. They provide the components needed to drive the second (KPM1500) fuel pump electrically while the FSCM handles the primary. Using pulse width modulation to slow down the pumps is very effective in keeping fuel temperatures down and relieving the electrical system of excessive load. Ally controllers help reduce the amount of power that the FSCM has at higher fuel demand, so at higher duty cycles the VaporWorx controller will start to out-run the FSCM and take more of the pumping power load. These Aeromotive VaporWorx kits are intended to be used as an Ally, or piggyback, system to help the OEM FSCM. No additional relays, Hobb's switches, etc. are needed.
Not Yet Reviewed
$577.15
$519.44
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
$508.95
On Sale
Holley's low-profile intake manifold for Ford's 7.3L Godzilla engine, when paired with a 20-340/20-340BK oil pan and accessory drive kit, allows for easy installation into vintage vehicles, kit cars, and other space-restricted applications while retaining the factory hood. The design focus for these manifolds was equal cylinder distribution and great street manners. The low-profile intake manifolds offer a much cleaner alternative to the original plastic intake; they provide anywhere from 2 to 3.5 in. of additional clearance, will correct the OE throttle body angle by 55 degrees, and increase the opening to 92mm. With three throttle body options, sturdy cast aluminum construction, a removable lower panel, and long runners to maintain the 7.3L's already substantial torque offering, this is a must-have for any Godzilla project. Throttle Body Options: * 1) 1986-1993 5.0L Mustang style drive-by-cable throttle bodies * 2) 2020-2023 7.3L drive-by-wire throttle body * 3) 2020-2023 GT500 drive-by-wire throttle body (requires P/N 300-903) Compatible Engine Components: * 1) Factory accessories as well as Holley accessory drives (except for 20-380 and 97-409) * 2) Factory fuel rails and Holley 534-265 / 534-266 billet rails Intake manifold features: * Lower profile (2+ inches) than the OE intake manifold * Sturdy cast aluminum construction that will hold up to the elements and forced induction * Perfect complement to Holley's Godzilla accessory drive and oiling system (20-320 / 20-320BK / 20-340 / 20-340BK) for fitment into tight engine bays * Removable lower intake panel that can be removed for additional porting, nitrous, etc. * Incorporates long runners for solid low-end torque * Includes throttle body gasket and all necessary O-rings and adapters to mount to the engine * Compatible with OE or Holley accessory drives and OE or Holley fuel rails * Corrects OE throttle body angle by 55 degrees * Available in natural or black powdercoat finish
Not Yet Reviewed
$949.95
$617.95
On Sale
FUELAB 529 Series electronic fuel pressure regulators work directly with the FUELAB Prodigy line of fuel pumps to reduce heat build-up and vapor lock conditions related to street/strip operation. Set the pressure mechanically like a traditional bypass regulator and let their demand-based speed control take care of the rest! These regulators generate a signal to the pump to control the return line flow rate. This feature reduces current draw while at low engine output to prevent fuel overheating--which could lead to system failure. Additional info: * Designed for use with FUELAB® Prodigy fuel pumps (41401,41402,41403,42401, and 42402 only) * Patented method for demand-based flow control; able to detect changes in demand before change in rail pressure is realized * Automatically reduces current draw at low flow demand * Additional analog output to track actual fuel system capacity * Independent system--no other connections, control boxes, or calibration required * Gasoline, diesel, methanol, and ethanol fuel compatible * Billet aluminum construction with anodized finish * Fine thread pitch for precise pressure adjustment * Versatile mounting bracket and stainless steel hardware * 1/8 in. NPT gauge port with plug for external pressure gauge * 1/8 in. NPT pressure reference port with barbed fitting
Not Yet Reviewed
$560.00
$504.00
On Sale
Aeromotive billet fuel rails are built for maximum fuel flow and ease of installation. They deliver optimal injector supply with minimal hydraulic fluctuation and will feed up to 3,000 hungry horses. The fuel rails feature ORB-08 ports with compact connections and positive leak-free sealing. Full-size ports at the end of the rails insure proper fuel flow. Additional inlet and outlet ports are provided where required for plumbing convenience. Steel mounting brackets are custom engineered for each application, combining a solid durable mounting platform that ensures a correct fit. Aeromotive fuel rails are CNC-machined and include a great looking anodized finish. Order the kit recommended for your vehicle.
( 14 )
$847.70
$762.93
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$1,149.95
$747.95
On Sale
Holley LS Modular Lo-Ram EFI intake systems have a top-feed plenum entry configuration, designed to allow the currently available Hi-Ram 105mm plenum tops to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications and was conceived to package with an air-to-water plenum-mounted intercooler—with a shorter overall height than is possible with other existing intake manifolds. Using a modular design, the top-feed plenum configuration with 105mm top keeps the overall height at just 9.07 in.! Additional features and specs include: * Cast aluminum construction * Modular design allows the use of the included top-feed plenum entry * Designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads * Will also work with OE or aftermarket cylinder heads * Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000 to 8,000 rpm, depending on application * Low height to aid the packaging of a plenum-mounted air-to-water intercooler in a top-feed configuration (or to fit under a stock or mildly modified hood in the front-feed configuration) * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits come with two sets of brackets—a set for long (usually standard length) fuel injectors, and a set for short (such as Pico or LS7) fuel injectors
( 1 )
$1,149.95
$747.95
On Sale
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,249.95
$687.95
On Sale
Aeromotive dual-action adjustable fuel logs incorporate new features previously unavailable. Each carburetor inlet uses a ball and socket assembly that swivels 20 degrees, allowing additional clearance for throttle stops, throttle linkage, and other accessories. They offer a healthy inlet that can feed high-horsepower engines and feature manufacturing from quality materials and a strong finish, providing durability and great looks. They also provide dual NPT ports (machined in) that allow you to install fuel pressure gauges or pressure transducers. Set a new standard for your ride with the Aeromotive dual-action adjustable fuel logs quality-engineered to fit!
( 4 )
$847.70
—
$881.65
$762.93
—
$793.48
On Sale
Milwaukee M18 FUEL 12 in. dual bevel sliding compound miter saws with ONE-KEY generates the power of 15-amp corded saws and is designed for the professional carpenter, remodeler, and general contractor. The miter saw is up to 15 percent lighter than competitor saws and delivers up to 330 cuts per charge. It has the same capacity as corded a 12 in. miter saw, providing you with the ability to perform all your critical applications while increasing your portability, efficiency, and productivity on the jobsite. The cordless miter saw features Milwaukee's POWERSTATE brushless motor, REDLINK PLUS Tool Intelligence, and is powered by M18 REDLITHIUM batteries. The saws have a shadow cut line LED light, an adjustable stainless steel detent plate, cam locking miter system, and easy carry side handles. They are available as tool only with 12 in. miter saw blade, clamp, and handle or in a kit that also includes battery and charger. Additional features: * 7 1/2 in. nest crown capacity * 6 3/4 in. vertical capacity (base board against the fence) * Integrated handles * REDLINK PLUS Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 system
Not Yet Reviewed
$899.00
$749.00
On Sale
Designed to meet the needs of landscape maintenance professionals, Milwaukee M18 FUEL 10 in. pole saws with QUIK-LOK capability give you the power to cut hardwood branches, reach full throttle in under 1 second, and deliver up to 150 cuts per charge, plus quickly change attachments to perform several different tasks with a single Power Head. Each pole saw is equipped with Milwaukee's POWERSTATE brushless motor that provides the power to maintain speed in demanding applications without bogging down. And the motor is positioned in the rear of pole saw to provide the best combination of power, balance, and maneuverability. Milwaukee M18 FUEL 10 in. pole saws with QUIK-LOK are offered individually (tool and shoulder strap) or as a kit that also includes a 3 ft. attachment extension, REDLITHIUM battery, and a rapid charger. Additional features and specs: * REDLINK PLUS Intelligence optimizes performance, provides overload protection preventing damage to tool and battery during heavy applications * 0 to 4,600 rpm * Chain gauge: .043 in. * Chain pitch: 3/8 in. low profile
( 1 )
$799.00
$599.00
On Sale
Milwaukee M18 FUEL 7 1/4 in. dual bevel sliding compound miter saws meet the demand needs of the professional carpenter and remodeler. Designed to increase productivity and efficiency on the jobsite, the M18 FUEL 7 1/4 in. dual bevel sliding compound miter saw combines the best in accuracy, portability, and performance. Weighing in at only 28 lbs. with battery, they are the lightest weight saws in their class. Dual bevel functionality provides users the most efficient and productive way make a variety of different cuts without flipping or turning the work piece. The combination of the POWERSTATE brushless motor and M18 REDLITHIUM XC5.0 battery delivers over 600 cuts per charge for all day runtime on a single charge. They are available with saw only, blade wrench, carbide tipped blade, and clamp, or in a kit that also includes battery pack and charger. Additional features: * Over 600 cuts per charge * Cam Locking Miter Detent System * Integrated top and side carry handles for easy transportation * Dual bevel with stops at 45 degrees and 48 degrees * Shadow cut line indicator for quickly lining up cuts
Not Yet Reviewed
$549.00
$449.00
On Sale
NOS Pro Race Fogger Professional kits have logged many hours of research and development at the race track. They're available with soft plume fogger or annular fogger nozzles. The kits also feature new distribution blocks and solenoids. The distribution blocks are manufactured from billet aluminum and are bright dip anodized in red and blue. They also use 3/16 in. compression fittings that are compatible with hard line or poly line. NOS Pro Race Fogger Professional kits include a new Pro Race nitrous solenoid, featuring a proprietary plunger material that resists swelling, and yet seals as well as Viton®-type material. The nitrous solenoids have a blue powdercoated housing and the Cheater fuel solenoid has a red powdercoat for easy identification. Achieve up to an additional 800 hp with select NOS Pro Race Fogger Professional kits.
( 3 )
$949.95
$522.95
On Sale
If you think the torque of that monster diesel is something to brag about, then you should feel it with the extra power of NOS diesel nitrous kits. These kits work with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring, and complete instructions. Give your ride the kick it needs with NOS diesel nitrous kits. Features: * Specially designed for diesel engines, including Duramax, Cummins, and Power Stroke * Adjustable horsepower settings * Gains up to 75 hp on stock applications * Upgrade your fuel system or computer for additional 60 to 150 hp * Higher horsepower gain with computer modifications * Available with or without mini 2-stage controller * Choice of 10 or 15 lb. blue bottle
Not Yet Reviewed
$1,299.95
$714.95
On Sale
Do you want more power in your late model UTV? NOS offers UTV nitrous oxide systems that add horsepower at the flip of a switch. These kits include the NOS mini 2-stage progressive nitrous controllers for exceptionally smooth power delivery. The kits are engineered to be easily installed and require no modifications to your induction system. Choose from kits with different bottle sizes and components in classic NOS blue or stealthy black finish. Order the NOS plate wet nitrous system designed for your powersports application. Features: * Little to no modifications to the fuel system, depending on application * Adds additional horsepower with included jetting * Additional horsepower possible with optional jetting and upgraded fuel delivery system or upgraded clutch kit/belt (depending on application) * Includes jetting for multiple rear wheel horsepower (RWHP) settings * 6061 T-6 aluminum bottle (2.5, 5, or 10 lb. sizes) * Wet nitrous system provides exceptionally smooth power delivery * Billet nitrous plate: 0.450 in. thick with 2.045 in. bore (black anodized finish) fits between throttle body and intake manifold * Vapor Guard fuel tee or billet fuel rail adapter (depending on application) is used for easy plumbing of fuel to the wet nitrous plate * 4 AN feed line size * PowerShot fuel solenoid * Flare jet style
Not Yet Reviewed
$1,199.95
$659.95
On Sale
COBB Tuning SF Intake systems remove a pre-turbo restriction in the stock intake system. They provide great power gains when combined with custom mapping on your Accessport tuner. To maintain optimal air flow, SF Intake systems utilize several unique features such as a custom conical cloth air-filter element and a computational fluid dynamics (CFD)-designed velocity stack. Tuned or stock, with the addition of a SF Intake system turbocharger induction noise and bypass valve venting sounds are much more audible. COBB Tuning SF Intakes were designed to be easy to install without having to modify your car. Installation requires no cutting or trimming of any components and can be completed with simple hand tools. Simply remove the stock air box and bolt the SF intake into place in just minutes. Additional attributes of COBB Tuning SF Intake systems (varies by model): * Temperature-resistant composite construction; saving weight and reducing heat transfer * Integrated velocity stack * Integrated airflow straighteners * 4-ply steel-reinforced silicone post-MAF tubing (where applicable) * Pre-oiled, cleanable, reusable, custom filter element * Air boxes are available for most applications (sold separately) * COBB Tuning off-the-shelf (OTS) maps for the Accessport make SF Intake installs easy: bolt it in, flash, and go IMPORTANT NOTE: Some SF Intakes REQUIRE tuning to ensure the MAF sensor reads properly and the engine operates within safe parameters. Check your application carefully.
( 3 )
$560.00
—
$765.00
$504.00
—
$688.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
