Availability
Showing In Stock Items. Show All 54 Items.
On Sale
Full-family roll cages installed on newer Jeep Wranglers not only provide better safety for back seat passengers, but they also allow for Smittybilt Bowless combo tops. These tops use the design of the roll cage to act as natural bows, while using the factory door surrounds, tailgate bar, and windshield header to hold everything in place. There are internal storage compartments for securing the side and rear windows, which are not only easy and convenient to use, but also allow for the quick and easy reattachment of the windows in case of bad weather. These tops feature smooth-running self-correcting zippers, 30 mil DOT-approved tinted vinyl windows, sealed seams and stitch holes, and zippered storage pockets. The marine-grade, vinyl coated material resists stretching and fading for improved life, and the fastback design adds a sporty style. Smittybilt Bowless combo tops can act as a full top or a convertible top, safely storing the windows for later use.
( 2 )
$709.99
—
$839.99
$549.99
—
$699.99
On Sale
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,249.95
$687.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 103 )
$1,199.95
$659.95
On Sale
Go Rhino Dominator Extreme DSS Sliders feature full-length rocker panel protection from trail obstacles and road debris. These rock sliders are built with an outer rub rail and removable full-length steel step. They're great for high-clearance use when a step area is still needed. Dominators are built from mild steel and feature a black textured powdercoat finish. They use OEM step and rock rail mount locations, and no-drill brackets are included. Each pair carries a 5-year limited warranty. Order the set designed to fit your truck, Jeep, or SUV.
( 1 )
$609.99
$518.49
On Sale
For a wheelin' good time off-road, make sure that your Jeep is armor-proof--XRC Armor! Smittybilt XRC Armor provides heavy-duty toughness and durability for off-road terrain. XRC fender flares are beefy, easy-to-install pieces that perfectly mesh fit and function to keep your Jeep as versatile as you. These fender flares feature 100 percent steel construction with a streamlined design that allows for increased suspension articulation, and they're powdercoated with a black textured finish for extra durability. When your OEM fenders don't meet your needs, these Smittybilt XRC Armor fender flares maintain streetability and style with off-road ruggedness, so you'll get the most fun from your Jeep everyday.
( 10 )
$799.99
$599.99
On Sale
Summit Racing™ classic OEM radiators are designed to give you top performance cooling, while fitting your vehicle's mounts, so your ride can have a new radiator without having to modify brackets and fittings. The radiators are available in various styles and sizes to best fit your application or engine bay design.
( 442 )
$569.99
—
$606.99
$512.99
—
$546.29
On Sale
Heat is the enemy of most major systems in a performance vehicle, especially the engine, transmission, and differential. As one of the top performing coolers in the Baja 1000 and Baja 500, the Fluidyne Enduro All-Season fluid coolers are used by top tier racing teams to tame their engine oil and transmission fluid heat. They have an 11 in. electric fan mounted directly to them, enclosed in shrouding that ensures maximum airflow through the cooler core, to deliver maximum cooling. Because they're self-contained, these coolers do not have to be situated in direct airflow. So, you can mount them in just about any remote location to cool engine oil, transmission fluid, or differential lube. In addition to the normal inlet and outlet fittings, they have threaded bosses to accommodate temperature sending units for inlet temperature, outlet temperature, or both. They also add two quarts of fluid to whatever system they're protecting, which further helps cooling.
( 2 )
$643.00
—
$737.00
$578.70
—
$663.30
On Sale
New Vintage USA 1981-93 Dodge Ram gauge packages are a great way to update your dash visually and functionally. Providing great style offered through modern lighting and features found in newer vehicles, the gauges fit nicely in the stock dash holes with the provided filler piece. These 3-gauge kits are available in several NVU styles, choose your preferred look. Styles offered: * Performance II Series instruments have the combined style of European sports car and racing gauges, providing a classic gauge feel without the "in-your-face" look of a racing gauge. Full sweep stepper motors for higher dial resolution, blue LED back lighting at night, stainless bezels, and flat glass add to the high-class, OE-installed look. Available with black or white faces. * Aviator Series instruments deliver the information you need in a clean, easy-to-read package designed to be rugged and take the abuse you throw at your high performance vehicle, whether it's race, off-road, or daily driver. They are LED backlit that glows red at night for minimal pupil dilation, and feature hard-shock case and spin-on back clamp with vibration dampening O-ring, waterproof up to 35 psi from the front. Aviator gauges are topped with black bezels and flat glass for easy viewing in open-cockpit vehicles. 4 3/8 in. gauges: * Speedometer gauge, programmable with OLED display 140 mph with turn signals and high beam * Tachometer gauge, programmable with OLED display with warning lamps * Quad gauge with Fuel (programmable inputs), temperature, pressure, and voltage
Not Yet Reviewed
$879.99
$791.99
On Sale
New Vintage USA 1972-80 Dodge truck gauge packages for 5-hole dashes are a great way to get your dash up to snuff and monitor your essential functions. With minor trimming, the gauges fit in the stock dash holes and with a wide range of styles and great Phoenix features in the speedometer your dash will look and function great! Styles offered: * Performance Series has OEM-style graphics that look modern and racy without being over the top, a perfect match for Pro-touring builds. Scratch-resistant stainless or black bezels, real glass lenses, white LED perimeter lighting for easy viewing at night, plus the same shockproof, waterproof, durable components used in NVU's commercial and military gauges makes them a great choice. Available with white or black faces. * 1967 Series gauges have true mid-60's style. Wraparound numbers, canted tic marks, LED perimeter lighting, stainless steel bezels, and domed lenses add a touch of class and that unique American muscle look. * 1940 Series gauges duplicated the feel of the very popular aircraft and military gauges of the 30s and 40s, but with modern technology. Military graphics with white tipped pointers, domed lenses, and stainless steel bezels deliver a "5-Star General" appearance, while the patented bi-torque 2 1/16 in. gauges offer the modern technology behind the scenes to provide accurate readings. Gauges: * 4 3/8 Speedo/Tach combination gauge * 2 1/16 in. Fuel gauge 73-10 ohm factory match * 2 1/16 in. Water temperature gauge * 2 1/16 in. Oil pressure gauge * 2 1/16 in. Voltmeter
Not Yet Reviewed
$699.99
$629.99
On Sale
Elevate Rack Systems FS bed racks create more storage options and overall cargo space for your full-size pickup truck. They feature a wider crossbar profile, robust aluminum construction with a durable textured powdercoat finish, and are adjustable from 18 in. to 28 in., making them ideal to carry anything from ladders and kayaks to roof top tents. Plus, they also allow the installation and full utilization of your tonneau cover, be it hard, rolling, or folding. Elevate FS bed racks simply slide into the integrated T-slots that your existing tonneau cover came equipped with. Truck bed covers without integrated T-slot channels will require the Elevate TS Rail (sold separately) to install the FS rack. Specifications: * Adjustable height -- 18 in. for easy access and lower profile look -- 28 in. when complete cab clearance is required * Robust engineered aluminum construction -- 750 lbs. static weight capacity (maximum load in fixed or stationary position) -- 500 lbs. on-road weight capacity -- 250 lbs. off-road weight capacity
( 1 )
$849.99
$779.99
On Sale
Make Holley SBF Hi-Ram EFI intake manifold bases the foundation for your custom induction system. Their modular design allows them to accept a variety of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. Aggressive looks and bold styling make your bad intentions clear—whether you're drag racing, truck pulling, or making waves in your boat—when you start with the Holley Hi-Ram EFI intake manifold bases. SBF Hi-Ram EFI intake manifold base features and specs: * Manifold base only designed for 8.2 in. deck height * Cast aluminum construction * Available in natural cast aluminum (satin) or black powdercoat finish * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system
( 1 )
$996.95
—
$1,049.95
$648.95
—
$682.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$999.95
—
$1,049.95
$649.95
—
$682.95
On Sale
New Vintage USA CFR Series gauge kits incorporate texture and color in a way that says high-tech, high-class, and performance all at the same time. These analog gauges are great for any build or resto-mod, and are topped with waterproof lenses and stainless bezels. The textured inner dial features colored accents and bold numbers to make your dash stand out. CFR Series clusters are sure to capture attention while monitoring vital components. Choose the style designed for fitment on your vehicle. * Phoenix programmable speedometers and tachometers offer an unsurpassed amount of functions, tech, and style with an optimal amount of information displayed on high-tech mini OLED screens that are the same size as traditional odometer windows. * Direct Drive systems provide a better, easier way to wire multiple gauges, making your installation faster and trouble-free. You will no longer need to spend hours wiring up individual connections for each gauge. With NVU Direct Drive, installing your gauge package will be as simple as plugging into a port on the back of the driver gauge.
( 2 )
$729.99
—
$799.99
$656.99
—
$719.99
On Sale
New Vintage USA 1999-2001 Dodge Ram gauge packages bring your dash up to date and match the theme of your build. Replacing the factory cluster, these gauge kits fit automatic and manual clusters with gas and diesel version available. Built-in indicators--turn signal, high beam, warning lights--are included. Styles offered: * Performance Series has OEM-style graphics that look modern and racy without being over the top, a perfect match for Pro-touring builds. Scratch-resistant stainless or black bezels, real glass lenses, white LED perimeter lighting for easy viewing at night, plus the same shockproof, waterproof, durable components used in NVU's commercial and military gauges makes them a great choice. Available with black or white faces. * Performance II Series instruments have the combined style of European sports car and racing gauges, providing a classic gauge feel without the "in-your-face" look of a racing gauge. Full sweep stepper motors for higher dial resolution, blue LED back lighting at night, stainless bezels, and flat glass add to the high-class, OE-installed look. Available with black or white faces. * Aviator Series instruments deliver the information you need in a clean, easy-to-read package designed to be rugged and take the abuse you throw at your high performance vehicle, whether it's race, off-road, or daily driver. They are LED backlit that glows red at night for minimal pupil dilation, and feature hard-shock case and spin-on back clamp with vibration dampening O-ring, waterproof up to 35 psi from the front. Aviator gauges are topped with black bezels and flat glass for easy viewing in open-cockpit vehicles. * CFR Series instruments bring design, technology, and features with exotic muscle graphics incorporating textures and colors in a way that says high-class, high tech, and performance all at the same time. Textured inner dial with colored accents and bold numbers topped with waterproof glass lenses and stainless bezels are sure to get your attention while monitoring vital components. Gauges: * 3 7/16 in. Speedometer 140 mph programmable with one auxiliary input * 3 7/16 in. Tachometer 8,000 rpm with two auxiliary inputs * 2 1/16 in. Fuel gauge, programmable (two ranges, factory-match) * Temperature gauge--140 to 280 * Oil pressure gauge--0 to 100 psi * Voltmeter--9 to 17 V
Not Yet Reviewed
$799.99
—
$829.99
$719.99
—
$746.99
On Sale
Drag racers want their cars to be as safe as possible, and Competition Engineering 12-point roll bar main hoop kits offer superior strength and chassis rigidity for 360 degree driver protection. This design links the cage to the front frame, essentially making it one solid unit--you'll notice better control and vehicle reaction time. These packages furnish you with the main hoop, one top hoop, two front downstruts, one main hoop crossbrace, and two forward struts. This type of modification is required on most racing circuits for increased cabin safety and side impact security. The units require only minor modifications and welding for solid installation; they're tailored for specific types of cars, so check the applications for matching specs. Competition Engineering 12-pt roll bar main hoop kits require also ordering the appropriate strut kit if you desire a complete roll cage install. Both kits are available in mild steel and chromoly.
Not Yet Reviewed
$725.99
—
$785.99
$653.39
—
$707.39
On Sale
Body Armor 4x4 front bumpers for your Jeep are extreme off-road equipment that will impress and please the most righteous trail runners. They feature heavy-duty 2 in. x 5 in. 3/16 in. wall steel tube construction with weld enclosed ends, strong dependable fully welded shackles and "D" rings, and a run under bar with a 2 in. receiver. Extra-brawny skid plates for serious steering box protection are included with your CJ, TJ, and YJ bumpers, and their durable black powdercoated finish adds aggressive appeal, plus extra protection and corrosion resistance. Body Armor 4x4 triple and quad hoop bumpers are fitted with unique side pockets for convenient stepping and two outboard light tabs with an additional two light tabs on the top hoop. Even better, these bumpers are a direct-fit for your stock job--simply bolt them on, there is no drilling required.
( 3 )
$633.00
—
$644.00
$538.05
—
$547.40
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
$508.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$949.95
—
$1,049.95
$558.95
—
$617.95
On Sale
Looking for the best competition-legal UTV race tire? Introducing the Tensor Tire Desert Series Race lineup. Whether you prefer the lightweight DSR30, the SCORE/BITD legal DSR33, or maximum height at 37 in. tall with the DSR37, this race-proven series is the top choice for those who demand the best. Select the size needed for your ATV/UTV. Additional details: * Patented race tire developed specifically for competition * Proprietary nylon bias-ply with fiberglass belted construction saves weight over steel * Decreased weight unleashes all of the available horsepower from your machine * Evolved closed tread pattern reduces drivetrain strain without reducing traction * Superior steering response and decreased braking distance from flatter tread contact patch * Increased number of biting edges for quicker acceleration * Unique weight optimized ribbed protection for puncture prone upper sidewall * 1,600 lbs. load rating will support fully loaded machines
Not Yet Reviewed
$620.00
$527.00
On Sale
New Vintage USA 1994-98 Dodge Ram gauge packages bring your dash up to date and match the theme of your build. Replacing the factory cluster, these gauge kits fit automatic and manual clusters with gas and diesel version available. Built-in indicators--turn signal, high beam, warning lights are included. Styles offered: * Performance Series has OEM-style graphics that look modern and racy without being over the top, a perfect match for Pro-touring builds. Scratch-resistant stainless or black bezels, real glass lenses, white LED perimeter lighting for easy viewing at night, plus the same shockproof, waterproof, durable components used in NVU's commercial and military gauges makes them a great choice. Available with black or white faces. * Performance II Series instruments have the combined style of European sports car and racing gauges, providing a classic gauge feel without the "in-your-face" look of a racing gauge. Full sweep stepper motors for higher dial resolution, blue LED back lighting at night, stainless bezels, and flat glass add to the high-class, OE-installed look. Available with black or white faces. * Aviator Series instruments deliver the information you need in a clean, easy-to-read package designed to be rugged and take the abuse you throw at your high performance vehicle, whether it's race, off-road, or daily driver. They are LED backlit that glows red at night for minimal pupil dilation, and feature hard-shock case and spin-on back clamp with vibration dampening O-ring, waterproof up to 35 psi from the front. Aviator gauges are topped with black bezels and flat glass for easy viewing in open-cockpit vehicles. * CFR Series instruments bring design, technology, and features with exotic muscle graphics incorporating textures and colors in a way that says high-class, high tech, and performance all at the same time. Textured inner dial with colored accents and bold numbers topped with waterproof glass lenses and stainless bezels are sure to get your attention while monitoring vital components. Gauges: * 3 7/16 in. Speedometer 140 mph programmable with one auxiliary input * 3 7/16 in. Tachometer 8,000 rpm with two auxiliary inputs * 2 1/16 in. Fuel gauge, programmable (220-20 ohm factory-match) * Temperature gauge--140 to 280 * Oil pressure gauge--0 to 100 psi * Voltmeter--9 to 17 V
Not Yet Reviewed
$799.99
—
$829.99
$719.99
—
$746.99
On Sale
Outfit your top end with a set of these assembled ATK High Performance aluminum cylinder heads for small block Chevrolet. They're cast, machined, and assembled with A356 aluminum alloy. The heads feature the latest port designs for maximum efficiency and increased power, and improved stock exhaust port location for better header fitment. ATK High Performance aluminum cylinder heads for small block Chevrolet include: * 2.020 in. stainless steel, swirl polished with undercut stem intake valves * 1.600 in. stainless steel, swirl polished with undercut stem exhaust valves * Manganese bronze valve guides * Alloy valve seats * 1.437 in. diameter valve springs (.600 in. max valve lift) * Chromoly 7-degree valve spring retainers * Single groove 7-degree valve locks * Valve spring locators * 5/16 in. flat pushrod guideplates * 3/8-24 in. rocker arm studs
Not Yet Reviewed
$798.99
$748.99
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$849.95
—
$899.95
$552.95
—
$584.95
On Sale
New Vintage USA Aviator analog gauges deliver the information you need. Monitor your vitals in a clean, easy-to-read package. Topped with black bezels and flat glass for easy viewing in open-cockpit vehicles, they are designed to be rugged. With an aviation theme, they're great for any vehicle that demands a military look. The full sweep analog readout gives you precise readings, while maintaining easy visibility at night. Tech features: * Phoenix programmable speedometers and tachometers offer an unsurpassed amount of functions, tech, and style with an optimal amount of information displayed on high-tech mini OLED screens that are the same size as traditional odometer windows. * Direct Drive systems provide a better, easier way to wire multiple gauges, making your installation faster and trouble-free. You will no longer need to spend hours wiring up individual connections for each gauge. With NVU Direct Drive, installing your gauge package will be as simple as plugging into a port on the back of the driver gauge.
( 6 )
$729.99
—
$799.99
$656.99
—
$719.99
On Sale
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 12-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 12-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 12-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two front downstruts, and two forward struts * 12-Point Roll Bar Strut Kit, which includes two rear struts, two door struts, a rear X-brace, two diagonal hoop supports, 12 weld joint gussets, and 10 steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 4 )
$638.98
$575.08
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
