Availability
Manufacturer Rebate
Stack Professional linear potentiometers are engineered to excel in the most demanding conditions in motorsports, offering excellent repeatability, reliability, linearity, and extended environmental performance. Featuring IP67 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 2 to 8 in. (50 to 200mm), these position sensors are pre-terminated for use with Stack data systems monitoring parameters, such as damper (shock) position, pedal inputs, steering angle, throttle position, aerodynamic surface deflection, and actuator travel. Select the stroke length needed for your setup.
Not Yet Reviewed
$518.99
Manufacturer Rebate
Dedenbear Multiple Relay Center units allow you to pre-wire all the relays in a single unit. Basically each stage has a signal wire going in and a power wire going out. The inputs and outputs have indicator LEDs for easy trouble shooting. All of the wiring mess is replaced with one simple compact relay center for the utmost in reliability. These units are so versatile, that they can be used to power anything in a car that needs high power levels, not just nitrous systems. * Use for high powered Nitrous solenoids or other high power devices such as fuel pumps, water pumps, throttle stops, fans, etc. * Four relays pre-wired and ganged together to power up to four stages of NOS solenoids * One separate relay with inputs and outputs completely isolated to allow wiring in any configuration * Relay inputs can be "negative" or "positive". *Relay outputs can be "negative" or "positive". * Indicator LEDs for relay coils and outputs make troubleshooting a snap. * Easy access replaceable fuses for each relay. * Incredibly simplifies wiring and improves reliability.
( 1 )
$556.99
Manufacturer Rebate
Dedenbear WP3s are the ultimate electric water pumps for dragsters and roadsters using remote, frame-mounted pumps. These universal pumps weigh just 3.25 lbs. and draw only 3 amps--yet they pump 15 gpm! They can be mounted in any position. Unlike rubber-impeller RV and boat units now in use, these rebuildable water pumps feature a hard-anodized, billet-aluminum impeller and custom seal. The inlets accept either 1.25 in. hose or 3/4 in. NPT; the outlets are 3/4 in. NPT.
( 6 )
$514.99
Manufacturer Rebate
At 4 lbs. and just 4.25 in. deep, these Dedenbear one-piece aluminum pumps draw only 3.5 amps, half the current draw of regular electric pump drives. These units crank out 20 gpm of flow, and withstand temperatures of up to 250 degrees, and pressures of up to 30psi. These units feature ball bearing motor, a threaded water inlet for 1.25 in. hose, 1.75 in. hose, or 1 in. braided line, plus, these electric water pumps are rebuildable.
( 5 )
$606.99
Manufacturer Rebate
Dedenbear Lightning delay boxes feature a billet aluminum enclosure that keeps all of the precision circuitry protected. The small multi-functional units' can be every racers little helper! Features include: * Four different delay modes * Tap/tap down * Starting line launch control * Two 4-stage throttle stop/nitrous timers * Adjustable transbrake lockout * East touch illuminated keypad * Lighted display for easy nighttime viewing * Independent line lock output * Remote dial-in board display output * Accidental transbrake release protection
( 1 )
$709.99
—
$746.99
Manufacturer Rebate
AutoMeter Chrono Series gauge kits are 12 and 16 V compatible—for everyday street cars to all-out race vehicles. Their unique three-dimensional dial design provides added depth and style to your custom dash, and their metric and imperial scaling offers easy relatable readings on applications around the world without the need for mental unit conversions. Expertly made from premium materials, these round gauges feature easy-to-read digits on their face dial, along with modern white LED through-the-dial lighting for nighttime use. In addition, these race-proven digital stepper motor electric instruments deliver unmatched accuracy.
Not Yet Reviewed
$667.99
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 187 )
$503.00
—
$803.00
Manufacturer Rebate
Clearance
AutoMeter American Muscle analog gauge kits feature advanced hybrid dial technology. They combine AutoMeter's signature white high-definition LED illumination and glowing red pointers for maximum readability. The authentic spun aluminum dials feature embossed details and chrome bezels for a unique, classic look. American Muscle gauges are available individually, in quad units, or in cluster sets.
( 5 )
$694.99
$568.50
Manufacturer Rebate
Clearance
These AutoMeter BVA-350 units are fast menu-driven battery testers and charging system analyzers in a great new size. They provide quick and accurate professional results, utilizing a 40 amp load, with AutoMeter's superior proven technology. The BVA-350s are user-friendly with no need to turn on headlights or accessories. Complete diagnostic system details are LCD-displayed after each test and stored in memory for review. The BVA-350s also perform a starter draw test and an alternator test. They automatically indicate amp output, open or shorted diodes, and good or bad regulation. Additional features include: * 6 V tests: battery check and load test * 12 V tests: battery check, load test, alternator amp output, stator diodes, regulation test, and starter draw test * 24 V tests: alternator stator diodes/regulation and starter check * Alternator test: good and bad diode detection; high, good, and low regulation; alternator amp output * Voltage drop test * Digital 1 in. x 2.5 in., 4-line x 16-character LCD display shows menus and test results * Automated 40 amp resistive load * 0 to 120 degrees F operating temperature * 0 to 85 percent humidity, non-condensing * Load tests batteries rated from 200 to 1,600 CCA * Measures 0 to 30 V with .01 V resolution * Vented cooling * Computerized and automated test sequences * External volt leads * 2.5 ft. cable, 16 AWG insulated volt and amp conductors * Memory holds last 50 tests * 9 V alkaline internal battery
Not Yet Reviewed
$662.99
$502.50
Manufacturer Rebate
MagnaFlow offers Standard Grade Federal/EPA-Compliant direct-fit catalytic converters for a variety of vehicles. Featuring stainless steel construction and mandrel-bent tubing to eliminate flow restrictions, they're designed for easy bolt-on installation (no cutting or welding required on most models). These units help to keep your check engine light off. The replacement catalytic converters meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII vehicles. Order the model recommended for your application.
Not Yet Reviewed
$511.00
—
$775.00
Manufacturer Rebate
AutoMeter Old Tyme Black Series analog gauge kits feature a timeless, nostalgic look—with the accuracy of a modern air core meter. Bold numbers on the dial face are accented by a black chrome bezel, an antique-style pointer, and a clear domed lens. The instruments are offered in a variety of configurations, including single dial with dual or quad gauges, and multi-unit clusters. Order the model best-suited for your dash panel.
( 3 )
$538.99
—
$674.99
Manufacturer Rebate
Dedenbear digital LED dial-in boards display your dial-in with a super-bright 4 in. tall LED readout. The units have a lightweight, clear anodized, billet aluminum housing and "no-glare" lens that is sure to look outstanding in your dragster or door car. A built-in sun sensor measures brightness and automatically dims the display at night. These boards will require a signal sent from a CC3, BM2, or MC1 (all sold separately) to display your dial-in.
Not Yet Reviewed
$594.99
Manufacturer Rebate
Let these Dedenbear CO2 shifters do the shifting for you! They offer a reliable and efficient way to automate shifting in vehicles with automatic transmissions, particularly in drag racing applications. Dedenbear 2-speed and 3-speed CO2 shifters are engineered to make the low to high shift on 2-speed Powerglide transmissions and the 1-2 and 2-3 shifts on 3-speed transmissions. Dedenbear CO2 shifters utilize large, oversize cylinders and high-flow solenoid valves, ensuring quick and precise gear changes. They are designed as direct bolt-on units, requiring no modifications to compatible shifters. Simply bolt the assembly to the shifter, plumb the airlines, and attach two wires. All parts are plated for corrosion resistance and a professional appearance. Dedenbear offers their CO2 shifters individually or as shifter kits with options, including CO2 bottles, rpm switches, and different mounting hardware, allowing for customization based on your specific application needs for your vehicle.
( 1 )
$502.99
—
$718.99
Manufacturer Rebate
Putting together the most advanced feature sets ever seen in boost controllers, AutoMeter has redefined the category. These AutoMeter electronic boost controllers are packaged in a familiar and easy-to-install 2 1/16 in. gauge housing. They offer some of the most powerful functions ever assembled for safely extracting the most performance possible from your forced-induction application, and the level of precision, response, and durability that racers have come to trust within the AutoMeter performance instrument range. Intuitive programming menus operated right through the controllers (no separate software or interface modules are required) make setup and use incredibly easy. Power is nothing without control. They are specifically designed for turbocharged gasoline engine combinations running up to 30 psi of boost pressure. AutoMeter electronic boost controllers feature: * High/low boost modes: pre-program and set two different configurable boost settings that can be switched between on-the-fly with the push of a button, perfect for performance track day cars and racing applications * Boost by rpm/boost by gear: integrating AutoMeter's most advanced digital tachometer circuit, your boost curve can be tuned precisely by 500 rpm increments to minimize wheel spin and put more power to the ground * One-touch gear capture: instantly capture each gear with the push of a button; drive normally in your chosen gear and hit the capture button * Peak boost recall: one-touch recall of the highest boost pressure achieved during a given time * Configurable warnings with overboost protection: easy-to-set parameters provide a full face flashing warning if boost pressure moves beyond your settings to quickly alert the driver. The warning doubles in speed if boost pressures exceed your programmed settings by 2 psi or more * Pro control output: using your programmed high and low boost settings, the AutoMeter boost controllers can automatically trigger external devices such as water methanol injection, intercooler sprayers, nitrous solenoids, or other devices that can be activated via relay * Pro control input: can also be controlled by external devices, any ground signal sent to the pro control input will immediately back boost levels down wastegate spring pressure * Display: highly versatile boost pressure reading units represented on the digital LED display can be selected via the user button interface * Data logger output: configurable scale 0-5v analog voltage output in either PSIA or PSIG allows for signal sharing/boost readings with other performance electronics, such as data acquisition systems or engine control units * Tach/speed signal diagnostic: onboard real-time diagnostics to verify the presence and correct operation of both of these inputs
Not Yet Reviewed
$509.99
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant universal catalytic converters help keep the check engine light off. They offer the right fit for a wide array of vehicles thanks to the adaptable universal design (cutting and welding is required). With highly corrosion-resistant, stainless steel construction, you can have confidence in the quality of these catalytic converters. They are designed to meet or exceed California Air Resource Board requirements and have undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states.
( 2 )
$560.00
—
$653.00
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 423 )
$503.00
—
$686.00
Manufacturer Rebate
Innovate ethanol advanced gauges assist you in running a healthy engine with their compact 4-in-1 data display. Monitor and capture up to four parameters in a single digital gauge. These resources allow the user to observe critical metrics for accurate and reliable tuning or log them for review on appropriate software. The OLED display can display deep black levels and is thinner and lighter than an LCD, with a higher contrast ratio. Innovate ethanol advanced gauges are available with or without the ethanol content flex fuel sensor.
( 1 )
$522.99
Manufacturer Rebate
These AutoMeter Antique Beige street rod gauges feature a timely, nostalgic look with the accuracy of a modern air core meter. Their beige-colored face is accented by a chrome bezel and a clear domed lens, capturing the essence of the automobiles of the past. The hollowed-out end of their antique-style pointer has a diamond shape that matches the major division increments.
( 23 )
$516.99
—
$674.99
Manufacturer Rebate
Clearance
AutoMeter Designer Black Series analog gauge kits provide you with a lot of data—in a variety of packages. They take rodders back to the original look of high performance instrumentation. The classic black dial face with bold numbering, clear domed lens, and chrome bezel make these gauges the choice of top show-car builders. Gauges are offered in single, dual, and quad data faces, as well as multi-gauge clusters. All lighting and mounting hardware is included for an easy installation.
( 17 )
$522.99
—
$645.99
Manufacturer Rebate
Maintaining a healthy engine requires a watchful eye on the vitals—and monitoring just became easier with AutoMeter Spek-Pro diesel truck gauge and pillar kits. These pre-made towers offer an easy view of such gauges as boost, pyrometer, and transmission temperature. Many options are available for Ram, Ford, and GM diesel trucks, including pillar and dial colors, bezel finishes, gauge quantity, and speaker holes. You select from seven colors to illuminate the backgrounds, adjustable for day or night brightness, with separate dimming for the dial and pointer. The gauges are programmable for high and low limit warning alerts; when activated, two 2 amp control outputs are also able to control fans, external warning lamps, or buzzers. AutoMeter Spek-Pro diesel truck gauge and pillar kits deliver some of the largest displays ever assembled on 2 1/16 in. dials, and the plug-and-play wiring harness makes installation as simple as filling the gas tank.
( 1 )
$509.99
—
$730.99
Manufacturer Rebate
AutoMeter factory-match analog gauge kits are designed to match your instrumentation look in the daytime, with the exact same lighting as your OEM gauges at night. They feature factory-matched gauge faces, numbers, and pointers, so they'll look like stock originals direct from the assembly line! The AutoMeter diesel kits include a pillar pod mount with the gauges pre-installed and ready to fit right in. Choose the gauges desired, along with the pod style (dual, triple, etc.) and color you prefer for your ride.
( 11 )
$512.99
—
$522.99
Manufacturer Rebate
AutoMeter Chrono Chrome Series analog gauge kits are convenient, cost-effective, all-in-one solutions. These 5-piece kits include an electric speedometer, fuel, oil, water, and volt gauges with a unique three-dimensional dial design that gives added depth and style to your custom dash. Key features and points: * Short sweep electric fuel level, oil pressure, water temperature, and volt gauges with full sweep electric speedometer * Unique 3-D beveled dials with modern white LED illumination and flush mounted windows * AutoMeter's race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle * 12 and 16 V compatible to work with nearly every street car or race car electrical system * Speedometer has a simple push button, 2-mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination * Speedometer is compatible with most 2-wire sine wave and 3-wire hall effect vehicle speed sensors * Speedometer features lit LCD odometer capable of registering a million miles with two resettable trip odometers
Not Yet Reviewed
$666.99
Manufacturer Rebate
AutoMeter offers Arctic White gauge kits in a variety of configurations. These "cool" looking instruments feature a white dial face with performance-inspired graphics, a polished chrome bezel, and classic domed lens. American muscle style in every sense! Red and green bulb covers illuminate the dials for nighttime driving. From dual and quad data gauges, to multi-gauge clusters, you'll find the Arctic White kit that's right for your vehicle.
( 10 )
$551.99
—
$674.99
Manufacturer Rebate
It has never been easier to add the precision and quality of AutoMeter gauges to your project! AutoMeter Old Tyme White Series instrument clusters provide a custom performance instrumentation solution without the custom fab price. These easy-to-install direct-fit gauge/dash kits include a set of iconic Old Tyme White Series gauges featuring polar white dials, vintage artwork, arrow pointers, domed lenses, and bright chrome bezels with warm white perimeter dial lighting. The kits will also include precision engineered direct-fit dash panel/gauge adapter plate or rings, wiring harness, senders, and all the essentials needed to complete the installation. AutoMeter instrument clusters are complete package solutions that simplify the process of gauge installation while providing a clean, timeless look. They are available in many different 2-, 5-, and 6-piece configurations to outfit a variety of classic cars and trucks with modern performance.
( 3 )
$625.99
—
$748.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
