Availability
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 364 )
$564.99
$509.99
When it comes to high-horsepower applications, Rhodes Race Cars fabricated Ford 9 in. housings are the only way to go. Available in 48 in. and 60 in. lengths, all the kits feature face plates with 3/8 in. press-in studs, billet aluminum fill caps, and drain fittings. Mild steel housings have 3 in. axle tubes; chromoly housings use 3 1/2 in. axle tubes. They are available with many different options--get one for your ride today. Un-welded kits require a rear end housing fixture (sold separately) to ensure proper axle alignment. Welded kits are available from mild to wild for a wide range of horsepower applications and feature: * Housing ends of your choice * 4-link or ladder bar brackets * Mild steel or chromoly back braces
( 17 )
$564.95
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$741.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 381 )
$511.99
—
$670.99
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 16 )
$689.99
South Bend Clutch Dyna Max organic clutch kits are manufactured with performance organic friction material. Designed to provide smooth clutch engagement, these Dyna Max organic clutch kits include the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. The kits are available for a variety of clutch styles and applications and may come with or without a flywheel. Select the kit to fit your application needs.
( 101 )
$679.08
—
$696.32
South Bend Clutch stock replacement kits are an upgrade for your GM, Ford, or Dodge diesel rig. These single-disc kits offer organic friction material for smooth engagement with a high-quality construction for longer service life. The kits are available with or without a solid flywheel. Whether you need to replace your failing stock clutch or you want to increase your truck's horsepower and need a clutch that can keep up, South Bend Clutch has the best options for you. Select the stock replacement clutch needed.
( 5 )
$663.09
—
$696.32
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 64 )
$699.00
Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength driveshaft assemblies. These 3 in. diameter tubes are custom-drawn for consistent strength. Their forged yokes are welded on using state-of-the-art processes for improved reliability. They're accepted for use in most NHRA and all IHRA classes.
( 21 )
$502.84
—
$730.80
Hook up to your GM manual transmission with Advance Adapters Gen III/LS Series flywheel and clutch kits. These conversion kits contain custom clutch components designed to adapt the Gen III/LS Series to your GM manual transmission. The flywheel is specially designed for the included high performance LUK clutch components. Do you have a special conversion? Advance Adapters LS series Gen III manual transmission conversion kits make change easier. Features include * Custom flywheel * 11mm flywheel bolts * 11 in. pressure plate and disc * Pilot bushing spacer * Throwout bearing * 10mm bellhousing bolts * 10mm lockwashers * XRP dowel bolts
( 5 )
$740.00
Clearance
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 321 )
$1,397.99
$500.95
—
$749.99
Centerforce billet steel flywheels are available for popular import and domestic vehicles, including trucks. They're CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installations. No modifications are required in combination with either Centerforce clutches or other clutch assemblies built to OEM specs. These rugged flywheels are SFI-approved, so you know that you can count on them--on the street and on the track.
( 61 )
$524.95
—
$587.95
Valair Performance NV4500 13 in. conversion clutch kits allow for an upgrade in size, providing more surface area and better performance. These kits are available for both 12 and 24-valve Dodge Cummins diesels. They include a new 5-speed dual drilled flywheel, heavy-duty parts, and are designed for specific uses to best fit your needs. Get the right fit with Valair Performance NV4500 13 in. conversion clutch kits.
( 9 )
$683.62
—
$739.19
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 47 )
$624.95
—
$746.95
Motive Gear Ten Factory replacement axle shafts are available for direct fitment on nearly two dozen axle models and hundreds of vehicle applications. Built from quality materials and heat-treated for strength and durability, Ten Factory axle shafts are offered individually to swap out a broken or worn original—as well as in more complete kits, with multiple shafts, wheel studs, bearings, and seals (depending on your selection). The components feature strong forgings and alloys for quality axle shafts you can rely on. Choose the parts needed for your specific make and model.
( 139 )
$536.99
—
$703.99
Stock driveshafts get power to the axles, but they aren't designed for tough off-road use. Yukon Gear & Axle performance driveshafts feature stronger tubing to help prevent bending or wear that could cause the shafts to become unbalanced. They include heavy-duty hardware, transfer case yokes, and either 1310 or 1350 U-joints. For better off-road protection, upgrade to Yukon Gear & Axle performance driveshafts, available in many sizes and options for applications from 2007 and up.
( 1 )
$530.99
—
$683.99
If your clutch seems to be giving you the slip, Sachs Stock Replacement clutch kits are an affordable option for repair or replacement to help you restore your vehicle back to its proper operation. Sachs Stock Replacement clutch kit components are built to OEM specifications to offer the same fit, form, and function as the factory OE part for a safer, more comfortable drive. Choose the replacement clutch kit designed to fit your application needs.
( 9 )
$507.99
—
$515.99
Cardone remanufactured driveshafts are 100 percent dynamically balanced at 3200 rpm for vibration-free operation and increased joint life. They're engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Shafts are measured and straightened, slip yokes are lubricated, and new universal joints are installed to ensure optimum performance and durability. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. OE fit, form, and function come together with economical pricing in Cardone remanufactured driveshafts. Order the model recommended for your vehicle.
( 31 )
$500.99
—
$741.99
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 157 )
$617.99
—
$618.99
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 13 )
$690.99
—
$733.99
PEM Racing's Ford 9 in. rear-end housings, specifically designed for Grand National applications, provides a combination of strength, customization options, and maintenance ease, making them a popular choice for high-performance vehicles and race applications. The 9-inch design, particularly when used with a full floater setup like the Grand National, is built to handle significant power and torque. The large diameter of the ring gear contributes to the housings strength, making it more robust than other types of rear-end designs. PEM's custom housings, like their Grand National full floater, are often designed with thicker tubes and stronger materials for added durability.
Not Yet Reviewed
$722.99
Inland Empire Driveline high-strength un-welded driveshaft assemblies are perfect for custom applications. Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something. These 3 in. diameter tubes are custom-drawn for consistent strength. Each drive shaft features one welded forged yoke while the other end of the driveshaft is designed to be cut to length before welding the yoke on. Upgrade your ride with Inland Empire Driveline high-strength un-welded driveshaft assemblies.
Not Yet Reviewed
$561.80
—
$671.57
USA Standard Gear driveshafts are high-quality, direct replacement units to repair your binding, bent, or rusty driveshaft. This critical component keeps the power flowing from transmission or transfer case to your differential. Order the model recommended for your vehicle and engine application. Features include: * 100 percent new components * Slip yokes and U-joints are lubricated with high-temperature grease * Fully assembled for simple out-of-the-box replacement * USA Standard "Perfect Fit" driveshafts are guaranteed for proper fitment and easy installation * Strengthened over common, OE-replacement shafts to prevent failure * Dynamically balanced to ensure smooth operation and long life
( 6 )
$517.99
—
$740.99
Classic Performance rear axle conversion kits convert your rear to a 5-lug. If you've upgraded your 6-lug truck to a 5x5 in front, then you need to do the same in the back. These kits come complete with axles and may include spider gear and drums as well. Complete your 5-lug conversion with rear axle kits from Classic Performance.
( 53 )
$528.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
