Availability
Showing In Stock Items. Show All 20 Items.
Control wheel stands and put more power into moving the car forward. Get Rhodes Race Cars Pro Series wheelie bars for your vehicle today. Features and benefits: * Upper tubes, lower main tubes, and lower cross bar are made from 1 1/4 in. diameter, .065 in. wall, 4130 chromoly tubing for the ultimate in strength * Lower diagonals (X-braces) are made from 1 1/8 in. diameter, .058 in. wall, chromoly tubing * Lower main tubes come with TIG-welded wheel brackets installed * Wheel brackets are made from 4130 chromoly with a second hole to raise the wheelie bar for additional ground clearance during loading and unloading * Designed to be 80 in. from center of the rear end housing to center of the wheelie bar wheel * Full X-brace design for the lower section * Comes complete with 4130 heavy-duty rod ends, push pull pins, steel wheels, and all hardware necessary (welding required) * Welded kits available with lower section completely welded * Welded kits have upper bars with one threaded bung welded in; the second bung must be welded in once height has been established
Not Yet Reviewed
$549.95
Air Lift LoadLifter 7500XL air spring kits feature massive 7 in. double-bellow air springs designed to enable greater leveling strength at lower pressures—and provide up to 20 percent more air spring volume than the LoadLifter 5000 air springs. Their exclusive upper and lower roll plates protect the air springs from any possible abrasion damage and help increase load capacity by up to 10 percent. Most Air Lift LoadLifter 7500XL air spring kits utilize the exiting holes in your vehicle's frame to provide bolt-on installation with no drilling required. They also include end caps made of ultra high-strength, corrosion-proof, nylon composite that's as strong as steel, but weighs less and will not rust. If you need a high performance air spring kit for you heavy-duty truck, Air Lift LoadLifter 7500XL is your answer.
( 25 )
$698.95
Skyjacker Long Travel lift kit systems with M95 shocks are available in different lift heights for the JL Rubicon and non-Rubicon models. They feature dual-rate long travel coil springs, along with Skyjacker M95 monotube nitrogen gas-charged shocks offering no fade or lag for constant performance. Providing the best of both driving worlds, on-road and off-road, the first spring rate delivers exceptional on-road ride and the coils will expand while off-roading during extreme articulation, as the suspension droops, to keep the tires in contact with the ground much longer than linear rate or single rate coil springs. This results in a smoother and more controlled ride, while keeping the coil in the coil bucket at full droop. The second rate lower coils only engage after compression past the first rate, and this allows consistent control and stability when heavy off-road suspension movement is required. Whether it's the streets you travel or when hitting the trails, Skyjacker Long Travel lift kit systems with M95 shocks is a great choice for your Wrangler.
Not Yet Reviewed
$757.50
—
$819.17
Skyjacker Long Travel lift kits are available in different lift heights for different 4WD models. They feature dual-rate long travel coil springs, providing the best of both driving worlds, on-road and off-road. The first spring rate delivers exceptional on-road ride and the coils will expand while off-roading during extreme articulation, as the suspension droops, to keep the tires in contact with the ground much longer than linear rate or single rate coil springs. This results in a smoother and more controlled ride, while keeping the coil in the coil bucket at full droop. The second rate lower coils only engage after compression past the first rate, and this allows consistent control and stability when heavy off-road suspension movement is required.
Not Yet Reviewed
$520.12
—
$861.59
Skyjacker variable rate coil springs are designed with ride quality and performance in mind. Their selection offers your rig smooth cruising on the highway and support when you head off-road. Skyjacker variable rate coil springs feature a black powdercoated finish for added durability. Order the model designed for fitment on your vehicle application.
Not Yet Reviewed
$657.77
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 17 )
$699.99
—
$779.99
Improve traction without limiting wheel travel with BDS Recoil traction bar kits, made with heavy wall construction and internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. They offer a full float design for bind-free performance and can be installed with a range of lift heights. BDS Recoil bars are fabricated from 2 in. O.D. x 3/16 in. wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame. Axle mount uses BDS's ultra-durable large-forged flex end and jam nut. Using a forged housing with large 1 1/4 in. x 12 threaded shank, a single sided snap ring, and a one-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. Choose the kit designed for your vehicle.
Not Yet Reviewed
$675.95
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these tubular K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
Not Yet Reviewed
$699.99
Replace those under sprung factory springs with Eibach Pro-UTV Stage 2 performance spring systems. These spring are perfect for the weekend warrior. By incorporating a dual spring setup, these springs deliver a smoother ride over rough terrain while carrying a higher spring rate to prevent bottoming out. An adjustable lock-out collar allows fine tuning of the transition point from the tender spring to the main spring. Eibach Pro-UTV Stage 2 performance spring systems are available for 2 or 4 seat UTV's.
( 6 )
$820.00
Skyjacker long travel lift kit systems with Hydro 7000 shocks are available in different lift heights for different 4WD models. They feature dual-rate long travel coil springs, along with Skyjacker Hydro 7000 shocks offering no-fade or lag for constant performance. Providing the best of both driving worlds, on-road and off-road, the first spring rate delivers exceptional on-road ride and the coils will expand while off-roading during extreme articulation, as the suspension droops, to keep the tires in contact with the ground much longer than linear rate or single rate coil springs. This results in a smoother and more controlled ride, while keeping the coil in the coil bucket at full droop. The second rate lower coils only engage after compression past the first rate, and this allows consistent control and stability when heavy off-road suspension movement is required.
Not Yet Reviewed
$649.06
—
$857.82
Engineered for the serious off-road enthusiast, Bilstein B8 8125 coilover shocks have the features to tackle any terrain. These steel, zinc coated shocks are equipped with: competition-designed, 3-stage seal packs; 22mm hard-chromed, case-hardened piston rods; remote reservoirs with high-temperature hoses; and threaded bodies. Components are precision-machined to precise tolerances to provide quick ride height adjustments, fade-free performance under intense heat, and the ability to tackle the harshest off-road environments. Bilstein B8 8125 coilover shocks are designed for use with dual-rate springs and available in a wide range of travel lengths, making them perfect for custom coilover suspension applications.
Not Yet Reviewed
$626.00
Skyjacker Long Travel lift kit systems with Black MAX shocks are available in different lift heights for the JL Rubicon and non-Rubicon models. They feature dual-rate long travel coil springs, along with Skyjacker Black Max shocks with twin-tube construction, advanced foam-cell technology, and increased fluid capacity for maximum heat dissipation. Providing the best of both driving worlds, on-road and off-road, the first spring rate delivers exceptional on-road ride and the coils will expand while off-roading during extreme articulation, as the suspension droops, to keep the tires in contact with the ground much longer than linear rate or single rate coil springs. This results in a smoother and more controlled ride, while keeping the coil in the coil bucket at full droop. The second rate lower coils only engage after compression past the first rate, and this rate allows consistent control and stability when heavy off-road suspension movement is required. Whether it's the streets you travel or when hitting the trails, Skyjacker Long Travel lift kit systems with Black MAX shocks is a great choice for your Wrangler.
( 1 )
$628.95
—
$676.85
Rough Country offers N3 Series suspension lift kits for thousands of trucks from the late 1960s and up—including models from Chevrolet, GMC, Cadillac, Dodge, RAM, Ford, Jeep, Toyota, Nissan, and Mazda. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle anywhere from 1.5 in. to 7.5 in. This is accomplished via a variety of lift component options, such as steering knuckles, torsion bar keys, spacers, strut kits, A-arm brackets, coil springs, leaf springs/blocks, upper control arms, Add-a-Leaf, and shackles. Suspension lift kits provide many benefits, including an aggressive stance, a clean level look, increased ground clearance, and plenty of ride height to accommodate larger tires. Rough Country kits feature front and/or rear N3 nitrogen-charged shocks for incredible ride quality on- and off-road. Most kits are 100 percent bolt-on, requiring no cutting, drilling, or welding. Enhance your rig with all-new stature; order the lift kit recommended for your truck!
( 15 )
$549.95
Made from heat-treated 4140 chromoly spring steel, these Hellwig anti-sway bars reduce body roll, even during tight cornering. They come with high-durometer polyurethane bushings to ensure superior performance—and install easily with basic hand tools. Mounting hardware is included.
( 569 )
$553.64
—
$762.11
Dorman leaf springs are perfect replacements for your old, worn-out springs. Built to the original specs, these leaf springs feature a black powdercoated finish to resist corrosion due to the elements to help prolong service life and include the required rubber bushings for installation. Fix up that old, tired suspension with help from Dorman and these replacement leaf springs.
( 45 )
$538.99
—
$542.99
These Universal Wheel-E-Bar kits allow the professional chassis builder to fabricate bars to fit a specific vehicle. Each kit is available in your choice of sprung or unsprung versions. The 60 in. long tubes can be cut to the desired length to suit individual needs. As an added feature, each kit includes the necessary material to install an upper cross brace for increased strength.
( 4 )
$532.99
—
$692.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
