Availability
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 103 )
$694.99
—
$709.99
Alloy USA high-strength rear axles are heat-treated twice, making them up to 35 percent stronger. These axle shafts come complete with bearings, seals, and wheel studs. The kits include both passenger and driver side axles.
( 22 )
$649.99
Yukon Gear & Axle pinion installation kits use Timken bearings and races, along with high-quality seals and small parts. They are terrific solutions for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. And Yukon does the research to make sure that you have everything you need to install your gear set, saving you time and money. The pinion installation kits include pinion bearings and races, a complete pinion shim kit, marking compound with a brush, and the additional pieces specific to your kit and application.
( 3 )
$611.99
Yukon Gear & Axle bearing kits offer quality and cost savings. When you don't need a master overhaul, these kits can save you some money. They include Timken bearings and races, along with high-quality small parts--and each kit is checked for the right fit to meet your application and replacement needs. These packages are available for dozens of axle models. So when you're ready to install replacement ring and pinion gears in your differential, start with a dependable bearing kit from Yukon. Yukon Gear & Axle bearing kits include: * Pinion bearings * Carrier bearings * Crush sleeve (where applicable) * Oil baffles and slingers (where applicable) * Pinion seal * Gear marking compound and brush
( 8 )
$606.99
Errrr, bang! Clunk clunk clunk. Very few parts last forever, especially those rotating at a high rate of speed. Spicer Drivetrain Products ring and pinion gears are perfect for replacing worn or damaged gears, changing ratios, or when refreshing the differentials. They hob and shave the gears for longevity with minimal mating stress, combine modern designs and materials including heat-treating and shot-peening to maximize life, and use high-grade steel for consistency and exceptional durability. Each gear set meets or exceeds Dana's standards for OEM equipment. Whether you need lower, higher, or the same ratio gears, look into Spicer Drivetrain ring and pinion gears with installation kit, available for hundreds of applications.
( 12 )
$510.99
—
$728.99
Alloy USA chromoly front axle shaft kits use high-tensile strength 4340 chromoly that is heat-treated twice, making them up to 30 percent stronger than stock. Keep your truck going on the trail, rocks, or mud with Alloy USA front axles.
( 4 )
$592.99
—
$944.99
Yes, boys, more is better! Alloy USA Grande rear axle kits will prove it. Strength will get you power, and these rear axle kits will upgrade your weak factory axles and increase the spline count to handle your engine's power and satisfy your need for adventure--more splines equal more strength and more power. Alloy USA knows that using the right materials with the right technology treatments adds strength, too. Grande rear axle kits are manufactured from high tensile strength 4340 chromoly and are heat-treated, tempered, and induction-hardened to produce heavy-duty axles that are up to 40 percent stronger than stock 1040 axles. They utilize the latest cold-formed rolled spline process to produce axle splines that are much stronger than traditional cut splines. Beef up to handle extreme terrain by choosing a Grande rear axle kit with an optional ARB or Detroit locker. These kits include everything that you need for your installation--passenger and driver side shafts, seals, bearings, and wheel studs. Boost axle strength for power to the ground both on the road and off with Alloy USA Grande rear axle kits.
( 1 )
$599.99
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$522.99
Artec Industries JK2TJ front axle swap kits with truss are designed to take serious abuse and reinforce your entire axle while also providing the factory link, anti-sway bar, track bar, and shock locations. The 1/4 in. thick truss top incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. By merging the link mounts into the truss, hours of work and trial-and-error can be avoided when compared to other bracket systems. Simply place the truss on the axle and all the other brackets fit into place exactly where they need to be. The JK front Dana 44 axle features a high-pinion differential, larger diameter ring gear than the Dana 30, larger disc brakes, and a wider WMS for lowered center of gravity. The JK2TJ front axle swap kits include all the brackets necessary, including lower control arm, shock, anti-sway bar, track bar, and coil spring mounts. Artec kits provide an overall low-profile design, meaning your axle will be stronger, sleeker, and easier to fit into any vehicle.
( 1 )
$659.99
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 157 )
$658.99
—
$768.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
