Availability
Showing In Stock Items. Show All 49 Items.
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 103 )
$1,199.95
$659.95
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 1 )
$599.95
—
$728.95
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$517.95
—
$799.95
Install one of these shifters in your race vehicle and see what folks in Super Gas, Top Sportsman, and Competition Eliminator already know. You'll see that they're one of the best race shifters around. Available in forward or reverse shift patterns, they have an adjustable positive stop to prevent overshifting, and one-hand reverse lockout to make operation extremely simple.
( 6 )
$599.99
Ford Performance Parts 2011-14 Mustang short-throw shifters feature a high-lubricity polymer bearing with a unique shifter rod, a blue anodized shifter handle and bracket, and a chrome stick topped with a white "Ford Performance Parts" logo shift knob. These GT reduced throw shifters are fitted with urethane body vibration isolators, include a jam nut, and retain the reverse lockout feature.
( 17 )
$529.99
On Sale
Hays Street 450 clutch conversion kits are an excellent upgrade offering up to 30 percent more holding power (clamping force) over your stock clutch. They're designed for handling stock to mildly modified engines—up to 450 horsepower. If drivability along with a stock pedal feel are the leading factors for your application, then order the Hays Street 450 clutch conversion kit recommended for your specific vehicle and engine size. Features, items, and specs: * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded damper springs * Pressure plate * Clutch disc * Throwout bearing * Alignment tool * Instructions
( 8 )
$515.95
—
$772.95
Motive Gear Performance competition-grade products are engineered to endure extreme punishment in dedicated racing vehicles operating in the harshest environments. They can be found in the winner's circle at NHRA, IHRA, SODA, SCORE, BITD, Ultra-4, and NASCAR events. The superior quality of Motive Gear Performance Pro Gear ring and pinion sets is the result of years of racing development, outstanding design, and state-of-the-art manufacturing methods. Pro Gear competition-grade gear sets are cut from 9310 steel, and then heat-treated to a precise hardness through a computer-controlled process. They are available in the widest selection of gear ratios for all popular axle housings. Racers know Motive Gear Performance ring and pinion sets will see them through to the checkered flag race after race. All Motive Gear Performance products meet strict quality standards through advanced manufacturing techniques and extensive testing is performed on all products by their in-house engineers. Competition-grade Motive Gear Performance Pro Gear ring and pinion sets are used by the top drivers and racing teams worldwide. Winning is #1, and Motive Gear can get you there!
( 2 )
$648.99
—
$720.99
Hays Classic clutch kits are the original Hays clutch! These conversion kits are the newest 26-spline version in the Hays clutch lineup, and are designed to work in conjunction with a modern 5-speed or 6-speed transmission swap. They feature an organic disc with an upgraded pressure plate for increased holding power over stock. They're designed for stock cars and trucks, or ones with minor performance bolt-ons, such as headers, intake, and exhaust. For clutch kits that are street-friendly, smooth, and reliable, consider the Hays Classic line of clutches—they're a great choice for your favorite muscle car, Jeep, or truck! Order the kit recommended for your vehicle application. Hays Classic conversion clutch kit features: * Includes 26-spline clutch disc for use with most 5-speed and 6-speed conversions * Steel back clutch disc features heavy-duty hub spring assembly for increased load capacity * Great drivability for power levels up to 400 hp * Clutch kit is painted signature Hays Classic orange color * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded pressure plate gives you increased holding capacity over a stock clutch * Clutch kits come complete with pressure plate, disc, release bearing, and alignment tool (unless otherwise noted)
( 1 )
$515.95
Avoid premature failure with Spicer Drivetrain Products differential inner gear kits. Containing the only parts engineered to meet Dana specifications for strength and durability; these kits have everything you need to rebuild your differential case. Forged for longer life in Dana axles, you'll receive spider gears and side gears with shims, as well as the cross shaft and retainer pin. Choose top performance differential inner gear kits manufactured by a legendary name--Spicer.
( 23 )
$680.99
The latest Tri-Ax shifters from Steeda Autosports are expressly designed for the Ford Mustang. They feature a style that is reminiscent of the venerable "top loaders" of the past, yet they incorporate 20 years of race-proven technology. Utilizing modern materials and machining techniques, these cog-swappers are right on the cutting edge! They offer short throws, precise action, and stop bolts to prevent damage to the transmission and linkage under hard usage. They also offer Steeda's unique 2-position handle height and calibrated internal spring tension to assist you in never missing third gear! The factory steel mounting rail is replaced with a substantial billet beam for more positive location. The shifter base, handle, and beam are all CNC-machined by Steeda from 6061 aluminum. Additional features of these shifters include: * No complicated, unnecessary adjustments * No Dynomat needed to cover up noise * No rubber used on main shifter shaft to wear out * Real stop bolts * No nylon bushing used in pivot to wear out like competitors * Tested to 1.5 million shifts with no measurable wear
( 4 )
$629.95
Yukon Gear & Axle Trac-Loc carrier cases are for Ford 8 in. and 9 in. housings and are available in street or race versions. These robust cases are the ultimate mechanical locking differentials, replacing your entire carrier assembly. Yukon Trac-Loc carrier cases feature a left case half of 1541H billet steel for increased strength, eliminating the weak point where most failures are found. The top half is made from forged steel. Whether your application is for the street or drag racing, Yukon Gear & Axle Trac-Loc carrier cases will have your rig roaring with performance.
( 2 )
$580.99
—
$708.99
On Sale
Hurst Blackjack shifters locate the shifter handle in the proper location for your application. The Blackjack housings are CNC-machined from billet 6061 aluminum, anodized with a tough black MIL-spec finish, and finally engraved with the Hurst logo in the top plate. Each setup includes a zinc-plated and hardened chromoly steel stick adapter, dual stick centering springs, hardened chromoly pivot pins, and a durable Delrin pivot ball for positive, quiet operation. The classic Hurst chrome flat bar stick and white shift ball for the specified application completes the Hurst Blackjack shifters.
( 20 )
$649.95
—
$749.95
XClutch chromoly lightweight flywheels are explosion-proof and designed to meet SFI specification 1.1. They come with an integral ring gear and timing sensor ring, if applicable. These flywheels have been engineered to the highest standards—and are available in a range of configurations for various performance street and track applications. Whether it's for a modified street car, dedicated race car, or an off-road 4x4, XClutch flywheels provide the ultimate solution for your specific vehicle. These replacements feature premium quality materials for strength and weight reduction. XClutch lightweight flywheels are the choice for many top motorsport teams and tuners from around the world. Order the model recommended for fitment on your car or truck.
( 1 )
$500.88
—
$587.58
XClutch chromoly flywheels are explosion-proof and designed to meet SFI specification 1.1. They come with an integral ring gear and timing sensor ring, if applicable. These flywheels have been engineered to the highest standards—and are available in a range of configurations for various performance street and race applications. They feature premium quality materials for the ultimate in strength and weight reduction. XClutch flywheels are the choice for many top motorsport teams and tuners from around the world. Order the model recommended for fitment on your car or truck.
( 1 )
$500.21
—
$694.82
Dorman transfer case motors are designed to meet or exceed OEM specifications for your electronically shifted transfer case. The transfer case motors are all-new units, not rebuilt or remanufactured, to ensure top quality and performance.
( 61 )
$557.99
—
$596.95
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$502.99
—
$792.99
On Sale
Hays Street/Strip clutch kits are engineered and built as matched assemblies, using only top-quality new parts, to deliver maximum reliability and durability, as well as long-term dependability. They're available in both diaphragm and Borg & Beck styles, with sprung-hub clutch discs that have organic linings. Applications are available to fit a variety of cars and trucks aimed at street or street-and-strip use. These kits come complete with a pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). A pilot bushing is not included.
( 9 )
$599.95
—
$749.95
Yukon Gear & Axle offers differential carriers for a wide range of applications. Yukon uses top-quality materials and the latest manufacturing technologies to produce strong, durable carriers that you can depend on for proper traction. These aftermarket units are available in a variety of styles—such as limited-slip, open, Traction-Lok, and locker—for fitment on dozens of axle models and vehicle apps.
( 13 )
$504.99
—
$785.99
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 46 )
$1,049.95
—
$1,149.95
$682.95
—
$747.95
ATI torsional input shafts work like a torsional spring bar--twisting and returning to totally eliminate breakage, while reducing shock loads to the gear train. They are manufactured from top-quality 300M or Vasco for maximum durability. Available for GM Powerglide or TH400 splines, these ATI torsional input shafts will add some reliability to your drivetrain.
( 11 )
$519.99
—
$649.00
Sonnax premium planetary assemblies are available in various configurations to meet different build requirements. The output shaft is available in the OEM length or short length, and the billet-machined drum flange in 12-tooth or 24-tooth. They are a big step up from standard case-hardened and tempered gears. Sonnax's top-quality racing gear material (SAE9310), combined with a freeze-tempering process (-150 degrees F), results in gears with improved grain structure and stability--tougher and more resistant to wear. Sonnax premium planetary sets are fully assembled and ready to install.
Not Yet Reviewed
$669.08
Yukon Gear & Axle Trac Loc positraction internals will help you get your truck back on the road and working the way it is supposed to. After years and miles of use and abuse, your posi differential is going to need to a rebuild in order to operate efficiently. Yukon offers these inclusive kits for the maintenance overhaul. To ensure a top-notch gear set that will last longer than stock, Yukon utilizes better materials and manufacturing techniques than original specifications. Your truck is too big of an investment to neglect or to service with poor-quality parts. Order Trac Loc positraction internals from the experts at Yukon Gear & Axle.
( 6 )
$768.99
USA Standard manual transmission bearing kits include top-quality components to rebuild the bearings in your transmission. They're great for replacing worn out or broken items--even just giving your transmission a quick update, while you're down in the off-season.
( 9 )
$500.99
—
$898.99
Rekluse TorqDrive clutch kits unlock the full power of your motorcycle engine. These top-of-the-line clutches are precision engineered from high-quality billet aluminum, and they're taking the world of elite racing by storm. The clutches are stronger, lighter, longer-lasting, and function at cooler operating temperatures—making TorqDrive clutch kits not just good, but Evolutionary! The features and benefits of Rekluse Clutch TorqDrive clutches: * Plus 6 friction disks offer up to 50 percent stronger clutch engagement with no increase in lever effort * Smoother shifting * Improved clutch lever feel * Engineered to eliminate slip—and tunable to handle high-horsepower engines * Steel core friction discs for improved heat dissipation and longer clutch life * Rekluse sleeves eliminate basket wear and notching
Not Yet Reviewed
$509.00
—
$579.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
