Availability
Showing In Stock Items. Show All 257 Items.
On Sale
FTI Performance SB Series torque converters are an excellent choice for mildly modified engines. They work well in street rods with air conditioning, as well as weekend bracket racers. The converters feature Torrington bearings, hardened impeller hub, hub furnaced and TIG-welded fins, high performance clutch lining, and strengthened sprague.
( 84 )
$659.00
—
$719.00
$593.10
—
$647.10
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 33 )
$538.99
—
$792.99
On Sale
FTI Performance ESR Series torque converters are designed for mildly modified vehicles. They're built using Torrington bearings, race-prepped sprague hardened impeller hub, hardened turbine hub and splines, a new steel pilot, and laser-cut mounting ring. These units are available in a variety of sizes, advertised flash stall ratings, and numerous other options. Order the torque converter recommended for your transmission application.
( 64 )
$649.00
—
$799.00
$584.10
—
$719.10
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 234 )
$508.99
—
$806.99
Chevrolet Performance offers these clutch kits for many GM applications. Each kit is a direct replacement for the factory original and includes a pressure plate and clutch disc.
( 12 )
$557.99
On Sale
If you use your ride as both a daily driver and weekend racer, you'll want the strength and reliability of FTI Performance SR Series torque converters. They're engineered entirely in-house at FTI and built to handle above-average power. These units feature TIG-welded furnace-brazed fins, a heavy-duty race sprag, and a hardened steel impellor. SR Series non-lockup converters include Triple Torrington bearings and a billet front cover for extra toughness. Each completed torque converter is pressure-checked and computer-balanced to ensure quality. Order the parameters desired and the model recommended for your transmission application.
( 14 )
$769.00
—
$819.00
$692.10
—
$737.10
Using the latest technology, J.W. Performance has come up with these Ultra-Bell bellhousings. Built rugged and certified, these flexplate shields allow for special motor and transmission combinations to be easily mated together. Manufactured from one-piece cast aluminum, these Ultra-Bells are five times stronger than stock bellhousings, which makes them capable of withstanding even the most severe tire shake and can fit under most stock floorboards. Order the Ultra-Bell bellhousing designed to fit your application.
( 79 )
$548.75
—
$700.77
Hughes Performance Pro Series Single Stage torque converter dump valve kits are single-stage complete kits for adding a dump valve to your Powerglide transmission. They offer increased stall speed while staging against the transbrake, faster engine/converter response, and reduced loading against the engine thrust bearing. They can also be applied down-track to help manage engine load and power application to the rear wheels. Hughes Performance Pro Series Powerglide torque converter dump valve kits are also available as upgrades on their Powerglide transmissions.
( 1 )
$653.99
On Sale
FTI Performance MR Series torque converters are specifically designed for mud boggers needing an incredibly strong spragless unit without draining the bank. They're ideal for 400 to 1,200 hp weekend runners—and still perform well during occasional races. Features include a forged billet steel front cover, a billet spragless center, a hardened flanged impellor hub, and a steel anti-ballooning plate. Triple Torrington bearings, computer balancing, and furnace-brazed and heli-welded fins add to the list of reliable bulletproof MR Series parts. These converters provide excellent torque multiplication, better heat-dissipating oil flow, and impressive performance. Order the parameters desired and the model recommended for your transmission application.
( 2 )
$799.00
—
$849.00
$719.10
—
$764.10
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$517.99
—
$792.99
Give your transmission an overhaul with these 94-piece T-5 transmission rebuild kits from Ford Performance Parts. You get everything you need for a complete and successful rebuild.
( 16 )
$608.99
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 26 )
$553.99
—
$777.99
Hughes Performance full manual valve bodies from are a must for competition applications. They provide full manual control over all shifts and deliver them without delay or time-costly overlap. These valve bodies are used for events where a trans-brake is not needed, such as in tractor pull, monster truck, and other track applications. They're available in both standard shift and reverse-pattern manual valve bodies.
( 7 )
$655.99
Ford Performance Parts Tremec Cobra R bellhousings are designed to mount the Tremec 3550 manual transmission to Ford 4.6L/5.4L modular gas engines. They are manufactured from cast aluminum and feature all factory mounting positions. The Tremec Cobra R bellhousings may require minor modifications for transmission clearance and mounting in some vehicle applications.
( 5 )
$669.99
On Sale
FTI Performance offers torque converter dump valve kits for a variety of transmission applications, including the GM Powerglide. Typically used in drag racing, a properly designed, tuneable dump valve system lowers the oil level in the torque converter by bypassing charge oil back to the oil pan causing cavitation within the converter. This cavitation reduces the forward thrust generated by the converter against the flexplate—which helps to reduce engine thrust bearing wear, increase available stall speed, engine responsiveness and boost response/transition while staging against a transbrake in forced induction applications.
Not Yet Reviewed
$569.00
$512.10
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$502.99
—
$792.99
On Sale
FTI Performance offers options for Powerglide input shafts. Their selection allows you to choose the strength and pricing to fit your horsepower and budget. From forged 4340 steel to forged 300M to CNC-machined ER100 that is virtually unbreakable, FTI Performance delivers the level of performance you want and need with their variety of Powerglide input shafts.
( 7 )
$599.00
$539.10
Ford Performance Parts clutch kits are available in several diameters and a wide variety of configurations to meet the specific requirements of your street, street/strip, or race vehicle. Depending on the application, available features include: * Heavy duty-organic linings * Carbon/copper linings on flywheel side and carbon linings on pressure plate side * Heavy-duty diaphragm kits with approximately 40 percent more capacity than stock clutches * Heavy-duty diaphragm-types with centrifugal assist and approximately 25 percent more capacity than OE units * Stronger covers and revised internal geometry to reduce clutch pedal effort by 10 percent * Nodular iron and cast iron plates * Some installations require new flywheels * Metric fasteners and dowel pins must be used with some clutches * Note: May mix and match Ford Performance Parts clutch discs and pressure plates, but do NOT install a FPP pressure plate with a stock disc or vice-versa as disengagement problems may occur
( 39 )
$559.99
Bowler Performance Tilton hydraulic master cylinder kits include the components to produce proper pressure and smooth shifting. Each kit contains a Tilton master cylinder, fittings, braided stainless steel line, billet aluminum or plastic remote reservoir, and hardware to attach to OE/factory clutch pedal or Bowler aftermarket pedal. Choose the clutch master cylinder kit designed for your vehicle.
( 1 )
$655.99
These flexplates from Chevrolet Performance are designed to be direct replacements for your stock flexplate. They provide the same high-quality performance as your original and are available for a variety of applications.
( 19 )
$578.62
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$525.99
—
$728.99
Unleash the power of your diesel engine! Hughes Performance extreme towing diesel torque converters are designed to handle the big power and torque that your engine puts out. They feature extra brazing for increased strength, heavy-duty bearings for greater torque capacity, a triple disk lockup clutch for greater towing capacity, stator modifications for increased torque multiplication, and a billet cover to eliminate converter bow distortion.
( 6 )
$563.99
—
$707.99
On Sale
For high performance parts and excellent workmanship, trust FTI Performance automatic transmission input shaft and drum kits. With options like steel, Ermet, or 300M input shaft and drum kits, FTI has units available for various racing needs.
( 2 )
$679.00
$611.10
On Sale
FTI Performance planetary gear sets are available in a variety of ratios, lengths, and strengths. Materials range from 4340 steel, to heavy-duty 300M, and 32-spline output billet cryo'd for those needing extreme performance. No matter the type of racing you're involved in, you can find the right planetary gear sets at FTI Performance. Order the set recommended for your transmission application.
( 1 )
$829.00
$746.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
