Availability
Showing In Stock Items. Show All 36 Items.
On Sale
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 2 )
$599.95
—
$728.95
$538.95
—
$655.95
On Sale
FiTech Go Shift transmission controllers are standalone electronic transmission control kits. If you plan on upgrading your transmission and you're having trouble with the wiring, back up lights, or shift points, the new Go Shift system is for you. Now you can have the luxury of a modern transmission for better response, better fuel economy, and overall reliability thanks to this system.
( 11 )
$599.00
$539.10
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 363 )
$564.99
$509.99
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$849.95
—
$1,449.95
$632.95
—
$812.95
On Sale
Summit Racing™ Pro LS torque converters are designed for stock and modified LS-powered street vehicles that make up to 600 rwhp. They will furnish the extra stall speed that you need for quicker launches—and they pair well with our Summit™ Pro LS series camshafts. These computer-balanced torque converters feature: woven carbon lockup clutch lining; heavy-duty Torrington bearings; hand TIG welding; a new pilot, impeller hub, and turbine hub; and a custom stator. The torque converters are available in a variety of options; order the model recommended for your application.
( 35 )
$564.99
$509.99
On Sale
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$599.95
—
$749.95
$538.95
—
$673.95
On Sale
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$595.00
—
$915.00
$514.50
—
$791.00
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$622.95
—
$823.95
$559.95
—
$740.95
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$599.95
—
$849.95
$538.95
—
$763.95
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 47 )
$1,049.95
—
$1,149.95
$682.95
—
$747.95
On Sale
ACT Sport clutch kits optimize the road to high performance by meshing solid products, outstanding quality, and exceptional value. They're crafted from CNC-machined parts and computer-balanced with no loose pieces to wear out or rattle for quiet, trouble-free operation. These Sport clutch kits with street discs are based on solid engineering principles, affording a clamp load increase of 20 to 40 percent with moderate pedal feel, and many of these new, not rebuilt units are SFI-certified to ensure safety. Get the power of your engine in motion with the smooth, precise feel and longer life of the ACT Sport clutch kits.
( 8 )
$590.00
—
$603.00
$510.30
—
$521.50
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$573.95
—
$1,349.95
$515.95
—
$742.95
On Sale
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 23 )
$559.00
—
$884.82
$503.10
—
$796.34
On Sale
USA Standard manual transmission bearing kits include top-quality components to rebuild the bearings in your transmission. They're great for replacing worn out or broken items--even just giving your transmission a quick update, while you're down in the off-season.
( 9 )
$593.99
—
$898.99
$504.89
—
$764.14
On Sale
B&M Transkits give you the same high-quality components that are used in all B&M Street and Strip transmissions. They include high performance friction materials, a complete overhaul gasket set, a drain plug kit, and all of the parts necessary to convert your valve body into a full manual/automatic valve body. These improvements enhance shift feel, while retaining full automatic features. The Transkits come complete with full instructions on how to assemble your transmission to B&M specifications (except BMM-70232 and BMM-70233). They also include special directions on how to modify your case, pump, and components.
( 44 )
$649.95
$583.95
On Sale
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 64 )
$699.00
$629.10
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$564.95
—
$1,149.95
$507.95
—
$632.95
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 31 )
$675.95
$607.95
On Sale
Hays Street/Strip clutch kits are engineered and built as matched assemblies, using only top-quality new parts, to deliver maximum reliability and durability, as well as long-term dependability. They're available in both diaphragm and Borg & Beck styles, with sprung-hub clutch discs that have organic linings. Applications are available to fit a variety of cars and trucks aimed at street or street-and-strip use. These kits come complete with a pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). A pilot bushing is not included.
( 9 )
$599.95
$538.95
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 372 )
$649.95
$583.95
On Sale
RAM Powergrip clutch kits offer your vehicle the perfect blend of drivability and performance. This dual-purpose clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 550 hp. All Powergrip kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip clutch disc features a combination dual-sided disc with RAM's premium organic facing material on one side and RAM's premium 900 series metallic facing material on the other side. This allows the Powergrip unit to deliver optimum street/strip performance. The RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 52 )
$558.04
—
$799.00
$502.24
—
$719.10
On Sale
Hays classic clutch kits are great replacements for original equipment units. They're available for all three major clutch types, diaphragm, Borg & Beck, and Long, and feature clutch discs with sprung hubs and organic linings. There are applications for a huge range of domestic vehicles, including pony cars, muscle cars, classics, and pickups. Kits come complete with pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). Pilot bushing not included.
( 11 )
$749.95
$673.95
On Sale
ACT Xtreme clutch kits pave the road to high performance by meshing solid products, outstanding quality, and exceptional value. These Xtreme clutch kits with racing or street discs are based on solid engineering principles. They afford a clamp load increase of 50 to 100 percent with moderate-to-stiff pedal feel, and many of these new (not rebuilt) units are SFI-certified to ensure safety. You've spent long hours building your engine; now put it in motion with the smooth, precise feel and longer life of an ACT Xtreme clutch kit.
( 16 )
$592.00
—
$652.00
$511.70
—
$563.50
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$675.95
$607.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
