Availability
Showing In Stock Items. Show All 62 Items.
EZ4X4 EZ Hard Top Lifts will help Jeep owners everywhere store their hard tops with complete security and confidence. Tops are expensive and can become damaged when storing on the floor or leaning against the garage wall. With an EZ Hard Top Lift, home storage has never been more complete and easier, featuring built-in bonuses which allow you to easily adjust the lift to hold and store a 2-door and or 4-door model top. When not in use the entire lift folds flat in seconds and can be stored along the wall or floor until needed again. Features and benefits: * Remove and store hard top safely and securely while keeping it free from scratches, dents, and damage * Lift removes and stores hardtops with ease through its easy crank belt system equipped with four easy glide rotational wheels for safe and secure transport * Folds in half for compact storage * EZ Hard-Top Lift is designed to accommodate both 2- and 4-door models making it the most universal application in hard top removal lifts * One-year workmanship/materials coverage (replace or repair)
( 1 )
$699.99
These Proform digital bench top valve spring testers are the most accurate in determining measured valve spring pressure. They are manufactured from heavy-duty billet aluminum and can check valve springs from 1.5 in. diameters and 3 7/8 in. tall. The digital display reads in 1 lb. increments and has backlighting for easy identification. The Proform digital bench top valve spring testers also feature peak hold and automatic shutoff.
( 7 )
$620.99
Homak 36 in. RS Pro Series top chests offer quality tool storage for your garage or shop. They will keep your tools easily accessible and safe. Plus, with outlets built-in to the top lid, four drawers, and included drawer liners, they will help to keep your tools tidy and organized. Homak RS Pro Series top chests feature: * Full-length aluminum drawer pulls with black plastic end caps * Removable ball-bearing glides in every drawer with 100 lb. weight capacity * PVC foam drawer liners included * Lift latch drawer pulls * Power outlets in top till * Available in several bold colors
Not Yet Reviewed
$706.99
—
$749.99
Homak 27 in. RS Pro Series top chests offer quality tool storage for your garage or shop. They will keep your tools easily accessible and safe. Plus, with outlets built-in to the top lid, four drawers, and included drawer liners, they will help to keep your tools tidy and organized. Homak RS Pro Series top chests feature: * Full-length aluminum drawer pulls with black plastic end caps * Removable ball-bearing glides in every drawer with 100 lb. weight capacity * PVC foam drawer liners included * Lift latch drawer pulls * Power outlets in top till * Available in several bold colors
( 1 )
$619.99
—
$649.99
Homak 36 in. Pro II Series top chests offer quality tool storage for your garage or shop. They're designed to keep your tools easily accessible when you need them—and safe and secure when you don't. Plus, with multiple drawers all structurally stiffened for added durability, lift-latch drawer pulls, included EVA foam drawer liners, and UV-protected powdercoat finish—the Pro II Series top chests are built to withstand the test of time. Homak 36 in. Pro II Series top chest additional features: * Full-length aluminum drawer pulls with black plastic end caps * Removable ball-bearing glides in every drawer with 100 lb. weight capacity * Available in several bold colors
Not Yet Reviewed
$671.99
—
$761.99
Homak 41 in. Pro II Series top chests offer quality tool storage for your garage or shop. They're designed to keep your tools easily accessible when you need them—and safe and secure when you don't. Plus, with multiple drawers all structurally stiffened for added durability, lift-latch drawer pulls, included EVA foam drawer liners, and a UV-protected powdercoat finish—the Pro II Series top chests are built to withstand the test of time. Homak 41 in. Pro II Series top chest additional features: * Full-length aluminum drawer pulls with black plastic end caps * Removable ball-bearing glides in every drawer with 100 lb. weight capacity * Available in several bold colors
Not Yet Reviewed
$758.99
Homak 27 in. Pro II Series top chests offer quality tool storage for your garage or shop. They're designed to keep your tools easily accessible when you need them—and safe and secure when you don't. Plus, with multiple drawers all structurally stiffened for added durability, lift-latch drawer pulls, included EVA foam drawer liners, and a UV-protected powdercoat finish—the Pro II Series top chests are built to withstand the test of time. Homak 27 in. Pro II Series top chest additional features: * Full-length aluminum drawer pulls with black plastic end caps * Removable ball-bearing glides in every drawer with 100 lb. weight capacity * Available in several bold colors
Not Yet Reviewed
$540.99
—
$562.99
The Baileigh Industrial IB-10 Bench Top Buffer/Polisher is a great machine for home or production work. This 1 1/2 hp powerhouse has all of the features that a shop could want at a great price. Additional product details: * 10 in. buffer runs on 115 V single-phase power and will work just about anywhere * CSA listed and approved * Accepts 10 in. x 1 in. x 1 in. buffing wheels * Turns at 1,800 rpm * Fully sealed ball bearings prevent machine breakdowns * 2 extra pairs of flange washers included * Comes standard with adjustable spiral and half spiral wheels * Solid cast structure ensures rigidity and vibration reduction * For the safety of the operator, an LED work light is included * Baileigh backs this 10 in. polisher with a 1-year warranty and lifetime technical support
Not Yet Reviewed
$644.99
Give your workshop, garage, or automotive center a place to store and organize tools with Homak 35 in. Pro Series slide-top service carts. They're manufactured from steel with a tough, powdercoated paint finish for lasting service. Four 5 in. casters (two that lock) provide easy maneuverability around your workspace. When it comes to tool storage, Homak does it right! Homak 35 in. Pro Series slide-top service carts feature: * Top panels that lock in place to create a stable work surface and slide apart to reveal additional tool storage * 2 full-length locking drawers * Removable 416mm ball-bearing drawer glides * HMC high-security tubular locking system with keys * EVA foam liners to protect tools * Slotted sides for organized screwdriver hanging * Heavy-duty rubber matting for protection and to keep your stuff in place * Large bottom storage shelf holds bulky items
Not Yet Reviewed
$709.99
Homak 35 in. Pro Series 4-drawer slide-top service carts feature heavy-duty steel construction with an epoxy polyester powdercoated finish, so they're built to be rugged! These service carts feature top panels that lock in place to create a solid work surface, and slide apart to reveal additional storage for tools and more! Other features include: * Four full-length locking drawers with EVA liners to protect tools * Heavy-duty rubber matting for protection and to keep tools in place * Bottom storage tray with mat holds bulky items * Full-length padded handle for easy mobility * HMC high-security tubular locking system * Four casters: 2 swivel with wheel brake, 2 fixed
Not Yet Reviewed
$698.99
Summit Racing™ 52 in. rolling cabinets are perfect for keeping your tools organized and right where you need them. The shell is made of 20-gauge steel and the drawers are 21-gauge steel that is powdercoated to protect against rust. Features: * Product dimensions are 52 in. wide x 18 in. deep x 36 in. high * Soft close ball bearing slides with 100 lbs. load capacity * 18mm thick wood worktop with UV coating * Pre-cut drawer liners included * Aluminum drawer handles * 5 in. diameter x 2 in. wide polypropylene casters--2 fixed and 2 swivel with brake * Power strip included with 4 outlets and 2 USB ports
( 3 )
$699.99
Campbell Hausfeld air receiver/surge tanks are designed for point-of-use air storage. They're ideal for providing compressed air for short, peak demand applications. The steel tanks are available in a variety of sizes. Additional features: * Multiple openings and NPT thread sizes * Plugs included in all openings * Gray powdercoat finish * Tanks rated and tested up to 180 psi * 175 psi recommended max working pressure * Model AR8035 includes top plate and is rated to 200 psi * ASME Code (except 2 and 3 gallon models)
( 2 )
$619.99
—
$764.99
Milwaukee offers part of the industry's most versatile and most durable modular storage system, the Milwaukee PACKOUT. These toolboxes are constructed with impact-resistant polymers and metal reinforced corners to provide up to 75 lbs. of weight capacity and ultimate durability in harsh jobsite conditions. They're equipped with integrated organizer bins and an IP65 rated weather seal to keep out rain and jobsite debris. Milwaukee PACKOUT toolboxes are fully compatible with all Milwaukee PACKOUT modular storage products. The toolboxes are available in a variety of sizes, individually or in a complete kit with the dolly base.
( 8 )
$533.46
Torque plates are bolted to the block deck while honing to simulate the stress applied to the bores when the heads are installed. If a cylinder is bored without a plate, once the head is installed, the bore will no longer be round at the top. Almost all factories routinely do this, as well as most engine shops. But torque plates allow an engine to break in faster, use less oil, and produce a little more power due to better ring sealing. ICT Billet engine block torque plates are specific to engine families and use factory length head bolts and studs. They are made from aerospace-grade billet aluminum.
( 17 )
$599.99
K Tool aluminum service jacks are designed for cars and light-duty truck applications. These jacks have a lightweight aluminum design for convenient transport, yet they're strong enough to handle most jobs. If you're looking for a high-quality, lightweight jack for your garage, these aluminum jacks by K Tool will provide efficient service over the long haul. Additional features: * Strong, 3-ton capacity, but weighs only 58.4 lbs. * Dual pump system for quick lifting (7 strokes to top under no load) * Lifting range 3 3/4 in. up to 19 1/4 in. * "D" side handle for easy positioning * 2-piece handle for easy storage * Includes handle pad for protecting the vehicle
( 2 )
$538.99
JOES Racing Products wheel stands will allow you to string, square, check angles and make all the necessary adjustments to your race cars suspension while it sits on its wheels. Constructed from quality aluminum for long-lasting durability, these stands can be combined with other JOES Racing Products' setup tools to get your car to the front of the pack! Additional features include: * Top plate dimensions: 15.5 in. x 15.5 in. * Weight tested (per set) to 3,500 lbs. * Height: 10 in. * Sold in a set of 4
( 2 )
$799.95
Allsourse VacBlast units permit you to blast, vacuum, collect, and recycle. Blast away dirt, rust, paints, and more using glass beads, aluminum oxide, steel grit, corn cob, walnut shells, plastic, or other abrasive media. Features include: * 28 gallon capacity * 140 psi maximum operating pressure * Powerful vacuum system reduces abrasive consumption 90 percent by recycling material * Ideal for use in automotive, marine, and industrial refinishing * Heavy-duty steel body construction * Powdercoated finish * Top opens easily to load abrasive and access the filter for cleaning * Perfect for use in large and small spaces that need to stay clean and free of debris * Lighted on/off switch * Powerful turbine vacuum system reduces clean up time * Easy to clean removable filter * Lightweight gun and brush assembly reduces hand fatigue * 6 in. diameter wheels for easy mobility * 8 ft. hose
Not Yet Reviewed
$699.99
JOES Racing Products nitrogen tanks are replacements for their portable tank kits. These high-pressure tanks allow you to fill tires without worrying about refilling the tank. These lightweight aluminum replacements have a max pressure of 1,800 psi. They are 5 in. diameter, and 18 in. high to top of release. For tools and equipment for all of your racing needs, look to JOES Racing Products.
( 1 )
$649.95
When it comes to fabricating sheet metal parts for your project, you need quality tools that perform with accuracy. Woodward Fab has been providing metalworking tools since 1966, so they know a thing or two about quality. These slip rollers have a heavy cast iron frame, solid precision-ground rollers (not tubing), hardened steel gears, and a quick-release top roll.
( 26 )
$595.99
Milwaukee M18 FUEL 10 in. dual bevel sliding compound miter saws meet the demanding needs of professional carpenters and remodelers, proving to be viable solutions to replace their corded saws. Designed for easy operation and repeatable, accurate cuts, they deliver greater capacity and corded cutting performance with their POWERSTATE brushless motors powered by M18 REDLITIUM batteries that will allow you to do a full day's work with up to 400 cuts per charge. Milwaukee M18 FUEL 10 in. dual bevel sliding compound miter saws include many premium features and are offered individually (tool only) with carbide tipped blade, blade wrench, clamp, and dust bag; or in kits that will also include battery and charger. Additional features: * REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity * 5 3/4 in. vertical capacity (baseboard against fence) * 2 x 12 in. horizontal capacity (lying flat at 90 degrees) * 5 1/4 in. vertical capacity nested crown * Cam-locking miter system * Adjustable stainless steel detent plate and 11 detent locations * Dual bevel with 9 detents and easy access bevel adjustment lever * Shadow cut line indicator for quickly lining up cuts * Detent override for easily setting miter locations outside of detents * Tall sliding/removable fences to support large base and crown against fence * Easy access blade change * Top and side carrying handles for maximum portability
Not Yet Reviewed
$549.00
Clearance
The Dewalt 52 in. rolling tool cabinet is constructed of double-wall steel for strength and durability. It has eight 200 lb. load capacity (and one 300 lb.) load capacity, full-extension ball-bearing drawer slides—with the Posi-Latch drawer latching system, which allows easy release by lifting the drawer trim. This cabinet also features a heavy-duty keyed internal locking system to safeguard tools. Conveniently charge your power tools, batteries, and electronics from the side of the cabinet. Overall load rating is 2,500 lbs., with reinforced mounting channels and four 6 in. x 2 in. casters, two of which lock and two that swivel. A full-grip tubular side handle with a comfortable black over mold offers ease of mobility. Also included are nine Dewalt embossed drawer liners and one Dewalt embossed top mat to help protect the cabinet surface.
( 1 )
$1,154.99
$749.50
Saw horses or cutting plasma on the floor are things of the past. Welcome to the world of WeldTables CertiFlat heavy-duty plasma tables! They provide an affordable way handle all of your plasma cutting by mounting right to your welding table—and they can easily be removed when not in use. These table tops feature replaceable slats if they become worn, and their 6 in. design matches perfectly with FabBlocks for mounting purposes. Now you can get your welding and plasma cutting done all in the same spot. WeldTables CertiFlat heavy-duty plasma tables have 16mm holes in the sides for hanging tools and mounting, and they're available in different dimensions.
( 3 )
$539.99
Sunex Tools compact slide utility carts are extremely efficient, saving you valuable money and time. Their mobility and flexibility make it possible for you to stay right next to your work all the time. They feature a 450 lb. weight capacity, which is the best in its class, roller bearing top slides that provide smooth-sliding top motion, a heavy-duty ergonomic grip handle, EVA foam liners, two heavy-duty locking casters, and grooved heavy-duty mats that provide a durable, easy-to-clean work surface. These compact carts also have a locking slide top to provide a greater work surface, as well as large bottom-shelf clearance. For all of your utility cart needs, Sunex Tools has you covered.
( 2 )
$523.99
—
$539.99
Just getting started in metal forming or looking for an inexpensive alternative to having your panels beaded by somebody else? Baileigh Industrial BR-18M-18 bead rolling machines might be the perfect solution. They're made from plate steel and have an 18 in. throat depth, making them ideal for strengthening any type of panel, such as roof, deck, and hoods. The machines are operated by a hand-crank that drives both the bottom and top bead rolls. A depth of bead can be altered by a simple top roll adjustment. Engineered to take years of abuse in any shop atmosphere, the BR-18M-18 bead rolling machines come with a heavy-duty stand. They also include a roll rack and six sets of the most common rolls required by metal forming enthusiasts: 1/16 in., 1/8 in., and 1/4 in. step dies, and 1/4 in., 3/8 in., and 1/2 in. bead dies. For added longevity, the driveshafts ride in quality bushings that can be periodically fed grease through grease fittings.
Not Yet Reviewed
$698.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
