Availability
On Sale
Competition Engineering funny car cage kits are crafted from aircraft-quality chromoly tubing. They're designed to upgrade your 10-point roll cage kit to have funny car cage protection. They are left long and un-notched so that they can be custom-fitted to your application and meet NHRA and IHRA requirements. If you need a kit to upgrade your kit from a 10-point or more roll cage to a funny car cage, Competition Engineering has you covered.
( 16 )
$557.99
$502.19
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 141 )
$509.95
—
$749.95
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
—
$599.95
Lifeline Fire Zero 360 fire suppression systems use Novec 1230 fire suppressant. It's non-conductive, efficient, and able to tackle fires that are out of sight of the nozzle. This makes the Zero 360 range perfect for use in the professional motorsport environment. Using only the finest materials in both construction and installation kits, the Zero 360 range has a system to suit every size application. Manual Fire Marshal Zero 360s are the perfect introduction for anyone looking to upgrade their fire suppression system. Stored pressure electric Zero 360s are electrically operated by the push of a button and an excellent option for the serious competitor. Remote charge Zero 360s self-pressurize upon activation and efficiently distribute their suppressant with a remote cartridge integrated onto the side of the cylinder. Order the Lifeline Fire Zero 360 fire suppression system best suited for your application. Features and items may include: * Zero 360 Fire Marshal and non-remote charge electric systems are available in 2.25 kg and 3.0 kg size models (both are considered 5 lb. systems) * Zero 360 remote charge electric systems are available in 1.5 kg, 2.0 kg, and 3.0 kg size models * 8mm tubing * FIA-compliant bracket and straps * Cross, bulkhead, and T-connectors (one each) * Cockpit nozzles * Engine nozzles * Pull cables (Fire Marshal models only) * Waterproof switches (electric models only) * Control box (electric models only) * Decal pack * 10 tube clips
( 1 )
$549.99
—
$749.99
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 5 )
$574.95
—
$599.95
On Sale
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 12-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 12-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 12-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two front downstruts, and two forward struts * 12-Point Roll Bar Strut Kit, which includes two rear struts, two door struts, a rear X-brace, two diagonal hoop supports, 12 weld joint gussets, and 10 steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 4 )
$669.98
—
$820.99
$602.98
—
$738.89
On Sale
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$690.99
—
$829.99
$621.89
—
$746.99
Safecraft LT Series fire protection systems are considered the "gold standard" of the industry. Racers and professional race teams use the LT models more than any other system. Their modular design and standard features make them the first choice for all motorsports. With a choice of bottle sizes and wide variety of activation and mounting options, Safecraft LT Series can be easily integrated in all vehicle designs.
( 11 )
$550.54
—
$689.76
On Sale
The partner package for the 8-point roll bar main hoop kits, these Competition Engineering 8-point roll bar strut kits provide the support pieces to complete your safety cage. They include: two rear struts, two front door bars, main hoop cross brace, two diagonal hoop supports, six weld joint gussets, and eight 6.000 in. square x 0.134 in. (10 gauge) thick floor plates. Combining these parts with a main hoop kit gives you an 8-point roll cage—a modification required in most racing circuits for providing increased cabin safety and side impact protection. Both the main hoop and the strut kit are available in your choice of mild steel or chromoly. Complete your design of a secure cockpit with a Competition Engineering 8-point roll bar strut kit.
( 5 )
$646.99
—
$675.99
$582.29
—
$608.39
On Sale
Drag racers want their cars to be as safe as possible, and Competition Engineering 12-point roll bar main hoop kits offer superior strength and chassis rigidity for 360 degree driver protection. This design links the cage to the front frame, essentially making it one solid unit--you'll notice better control and vehicle reaction time. These packages furnish you with the main hoop, one top hoop, two front downstruts, one main hoop crossbrace, and two forward struts. This type of modification is required on most racing circuits for increased cabin safety and side impact security. The units require only minor modifications and welding for solid installation; they're tailored for specific types of cars, so check the applications for matching specs. Competition Engineering 12-pt roll bar main hoop kits require also ordering the appropriate strut kit if you desire a complete roll cage install. Both kits are available in mild steel and chromoly.
Not Yet Reviewed
$769.99
—
$820.99
$692.99
—
$738.89
Alston Racing 10-point roll cages offer higher levels of chassis stiffening and protection than 8-point cages. Designed and built specifically for each vehicle, 10-point cage kits include floor plates and instructions. All Alston Racing 10-point roll cages are computer bent using 1 5/8 in. mild steel or 4130 chromoly and are available for a variety of makes and models. Please note: cutting, notching, and welding are required to complete the installation.
( 3 )
$675.00
On Sale
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$715.99
—
$792.99
$644.39
—
$713.69
On Sale
Competition Engineering 10-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 10-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 10-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two diagonal hoop supports, and two front downstruts * 10-Point Roll Bar Strut Kit, which includes two rear struts, two door bars, weld joint gussets, and steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 21 )
$660.99
—
$668.99
$594.89
—
$602.09
Alston Racing 8-point roll cages help stiffen your chassis and add protection. They are designed and built specifically for each vehicle and include floor plates and instructions. Available for a variety of makes and models, Alston Racing 8-point roll cages are computer bent using 1 5/8 in. mild steel or 4130 chromoly. Please note: cutting, notching, and welding are required to complete the installation.
Not Yet Reviewed
$559.00
On Sale
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$728.99
$656.09
Alston Racing 8-point roll bars are built specifically for each vehicle and come complete with floor plates and instructions. Available for a variety of makes and models, Alston Racing 8-point roll bars are computer bent using 1 5/8 in. mild steel or 4130 chromoly. Please note: cutting, notching, and welding are required to complete the installation.
Not Yet Reviewed
$664.00
Stroud Safety offers some of the most dependable fire suppression systems to keep you and your race vehicles safer. Their fire suppression delivery systems cover all motorsports applications. They are designed to achieve concentration within 10 seconds, keeping combustion from occurring, and they are SFI-approved. The systems include a bottle, head, mount, clamps, pull cable, nozzles, fittings, and tubing. Your car can be replaced and repaired--you can't! Protect yourself and your equipment to race another day with Stroud Safety fire suppression systems.
( 12 )
$669.99
Lifeline Fire Zero 360 Fire Marshal fire suppression systems are significantly smaller and lighter than the current generation of FIA-certified foam systems. They offer far better packaging within the confines of the modern competition vehicle. These car fire extinguishers are the result of extensive research and development, and have been awarded an FIA homologation number. Lifeline Fire Zero 360 Fire Marshal fire suppression systems have significantly improved the boundaries of motorsport car fire extinguishers. Included items: * Available in 2.25 kg and 3.0 kg models (both are considered 5 lb. systems) * 8mm x 6 meter tube * Bracket and straps * 6 meter heatproof over-braid * 2 straight inlet nozzles * 3 double-Z nozzles * 8mm equal-tee connector * 8mm bulkhead fitting * 5 tube clips * 4-way connector * Decal pack * 2 meter (6 ft.) pull cable * 4 meter (12 ft.) pull cable * Cable nipple
( 2 )
$749.99
Safecraft fire suppression systems are widely used by most top professionals in motorsports, automotive, and marine, as well as other demanding industries. Well-known for innovative designs and high-quality components, Safecraft offers the necessary replacement parts to keep your system up to date and you safe--everything from aluminum tubing and pull cable replacements to discharge nozzles and more. If you're the proud owner of a Safecraft fire suppression system, Safecraft has the replacement parts!
( 3 )
$529.68
—
$746.15
Zamp Racing is proud to offer their revolutionary RZ-70E Switch helmets! The helmets have a composite Aramid mix lightweight shell and also feature a unique cap system that allows you to easily configure it for a variety of racer setups by removing a cheek pad and three screws. The choice of different triangular caps makes adding communication or hydration to your Zamp helmet easy! The helmets new dual-density air integration relief system provides full 360-degree air channeling for ultimate airflow—cool air enters the helmet; warm air leaves the helmet. These Zamp helmets are available in a range of sizes, in solid colors or with cool graphic designs. Order the helmet in size and color you'd prefer. Product features include: * Composite Aramid mix lightweight shell * Certified as full face, but has open face feel * Z-design of air system in shell circulates air throughout (360 degrees) utilizing large internal channels—cool air enters the helmet, warm air leaves the helmet * Channels in chin bar EPS (expanded polystyrene crushable foam) allow for easy mounting of communications/microphone or drink tube * ZF-20 Peak visor included * M6 inserts for head-and-neck restraint * Triangular caps fit left or right; easy to reconfigure * Factory installation available for communications and hydration kits * FIA 8859-2015/Snell SA-2020 approved
( 9 )
$514.99
—
$539.99
There is nothing more valuable in your Suzuki Samurai vehicle than its occupants. Low Range Off-Road's Sport cage kits were designed with your own families' safety in mind. Low Range Off-Road manufactures their Sport cages in-house, from .120 in. wall DOM steel tubing, and when properly welded, the cage is very difficult to crush and will serve most off-roader's needs. The rear cage bolts into the floor of the tub, thereby utilizing a large floor plate it spreads the load across a large area, forming a strong attachment point. Cages are shipped in prebent and coped tube segments, ready to be welded together. Installing a tube cage usually precludes the use of Samurai doors, Low Range Off-Road resolved this issue by using laser-cut steel plates on the front lower portion of our cage. With their unique design elements, the front doors shut correctly and do not ruin your nice paint job or your door panels. This also makes it easier to run your door straps. In addition, integrated into the design is a speaker grille that can be removed for speaker installation—and is also made from the same 3/16 in. thick steel as the mounting brackets, therefore, it helps protect speakers from damage. Hopefully you never need it, but if you do end up on your lid, be assured that you'll more than likely come away with only minor scratches to the cage paint. Choose the Sport cage kit that is better suited to your specific application needs—or order both front and rear for a complete cage kit. Available Options: * Front Samurai Sport Cage kit: Part No. SRC-SCF * Rear Samurai Sport Cage kit: Part No. SRC-SCR * Complete front and rear set: Part No. SRC-SC—both front and rear halves of the Low Range Off-Road Sport cage tie into the factory soft top roll bar * Installation on a factory tin top is possible, but requires the addition of a soft top roll bar (sold separately) Note: Some minor grinding and trimming may be required.
Not Yet Reviewed
$520.19
—
$578.15
Lifeline Fire Zero 3620 Fire Marshal fire suppression systems use a combination of 3M Novec 1230 and an AR-AFFF blend for use with unleaded petrol, diesel, and E85 fueled vehicles. Housed within a single fabricated aluminum cylinder, the extinguishing agent discharges into both the engine and cockpit via aluminum tubing. This tubing is connected using high-quality, lightweight aluminum compression fittings. The systems are supplied with sufficient lengths of delivery pipework to ensure the best possible packaging within all vehicles. They also include two extra coolant outlets to be fitted for multiple areas in the engine bay that might need cooled down to help prevent re-ignition. For proper driver/co-pilot safety and FIA-compliance, all Lifeline Zero 3620 systems are described by cockpit volume. Due to mandated ballast being built into these smaller systems, there is no weight advantage across the 3620 range. Order the Lifeline Zero 3620 Fire Marshal fire suppression system best suited for your application. Kits include: * 2 cloud-burst cockpit nozzles * 3 engine nozzles (two foam nozzles and one HD nozzle) * 2 coolant nozzles for free placement * FIA-compliant bracket and straps * Tubing (10mm dia. in cockpit; 8mm dia. in engine bay) * Bulkhead connector * 3 T-connectors (two 8mm; one 10mm) * Intelligent control box * 2 waterproof switches * Wiring for switches and control box
Not Yet Reviewed
$699.99
OMP Racing's Black Collection Series extinguisher systems are designed as the first line of defense against unexpected fires on the racing track. Engineered for rapid deployment and effective suppression, these extinguishers provide peace of mind for drivers and crew alike. The Black Collection Series extinguisher systems are offered in several styles to meet your fire safety needs, and those of your Saloon or Formula car. All feature EcoLife, OMP's environmentally friendly foam base extinguishant that is ozone-friendly, and FIA-approved. Available for the engine compartment and cockpit in two styles: electronically activated with control box or mechanically activated, these fire suppression systems include stainless steel brackets and clamps, tubing, nozzles, and an aluminum or black powdercoated steel bottle. Stay prepared for any vehicle fire emergency that may arise during your racing endeavors with OMP Racing's Black Collection Series fire suppression extinguishers. Select the system better suited to your needs.
Not Yet Reviewed
$749.00
Alston Racing Pro-Link Funny Car cage conversion kits contain the bent and straight tubes needed to convert an Alston Racing Pro-Link chassis or roll cage to a Funny Car-style cage. Kits are offered in mild steel or 4130 chromoly and are complete with all necessary material and instructions.
Not Yet Reviewed
$629.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
