Availability
On Sale
MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Coil bracket -- Uses a bolt/nut combination instead of the easily stripped self-tapping screw * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector
( 2 )
$699.95
—
$749.95
$628.95
—
$673.95
These Meziere True Start 400 series high-torque starters are recommended for all high-compression, large displacement engines up to 700 cubic inches and supercharged applications. They feature custom gear reduction for the best cranking power and rotational speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. Meziere True Start 400 Series high-torque starters feature an offset design that clears all kickout style oil pans.
( 16 )
$662.40
—
$796.57
On Sale
MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.
( 93 )
$579.95
—
$632.95
$520.95
—
$568.95
These mini starters from Chevrolet Performance feature a compact design that delivers plenty of torque and increased clearance for extended oil pans and header exhaust systems. These lightweight and powerful starters rely on a 3.75:1 gear reduction to spin a high-compression engine.
( 17 )
$510.56
LS Classic Series distributor and plug wire sets are the perfect way to top-off your vintage appearing LS swap. LS Classic Series starts with a set of high-quality 7mm Kevlar® spiral core spark plug wires with high-temp silicone pre-installed 90 degree coil boots and straight unterminated spark plug boots. The wires are 9 ft. long with 40 ohms of resistance per ft., giving you all the length and performance you need to remote mount your coils—so they're out of sight and out of mind. The plug wires first connect to the coils and then pass into the hollow cast-aluminum distributor body that is bolted to the engine's valley plate. The wires continue on to the spark plugs through the distributor for an authentic nostalgic look. Top-off your vintage appearing LS swap perfectly with one of these distributor and plug wire sets by LS Classic. Note: These distributors are designed to bolt to the back two bolts of LS Classic valley pans and will not clear valley plates with raised ribs or oil pressure sender bosses.
Not Yet Reviewed
$724.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 241 )
$599.95
$538.95
—
$599.95
On Sale
These Pro-Billet dual pickup distributors from MSD are specifically designed for Circle Track racing. Not only do they feature a strong, CNC-machined billet 6061-T6 aluminum housing and a large steel shaft, but they also feature two magnetic pickups for a complete redundant ignition system that can be activated at the flip of a switch. The pickups are triggered as a precision reluctor, mounted to the oversized shaft, spins past. The pickups are placed precisely 180 degrees apart so that when you switch to the secondary ignition, the timing remains constant. Guiding the distributor shaft is the responsibility of two sealed ball bearings for incredible endurance and high-end stability. The shaft also receives a QPQ coating for corrosion resistance and friction reduction. Additional features include a fully adjustable mechanical advance consisting of a hardened advance cam, chromoly weights, and weight pins that are TIG-welded to the advance plate. The entire assembly is welded to the polished steel. The advance assembly can also be easily locked out for quick tuning changes. The Chevrolet model features two O-ring grooves at the base of the CNC-machined housing to prevent oil in the lifter valley from leaking through the oil passage. If the engine deck, heads, or intake have been modified, there is an adjustable slip collar that allows you to set the correct installation depth. All dual pickup distributors include a cap and rotor.
Not Yet Reviewed
$619.95
$556.95
FuelTech EGT-4 CAN conditioners are compatible with any Type K thermocouple (grounded junction or not). They feature a 4-channel signal conditioner with CAN bus communication for PowerFT ECUs that can be used to read EGTs, CHTs, oil, air, water or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up four white input channels to be used for other purposes. With the possibility to use up to four EGT-4 modules in the same installation, as many as 16 different channels will be available for all sorts of data acquisition. PACKAGES AVAILABLE: * V8 / 2 units, harnesses and 8 sensors: -- with 2 harnesses -- 2 of each 42 in./36 in./30 in./24 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 6 cylinder / 2 units, harnesses and 6 sensors: -- with 2 harnesses -- 48 in./42 in./36 in./30 in./24 in./18 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 4 cylinder / harness and 4 sensors: -- with harness -- 42 in./36 in./30 in./24 in. Thermocouple sensors included * 4 rotor / harness and 4 sensors: -- with harness -- 4 of the 36 in. Thermocouple sensors included * 3 rotor / harness and 3 sensors: -- with harness -- 3 of the 36 in. Thermocouple sensors included * 2 rotor / harness and 2 sensors: -- with harness -- 2 of the 36 in. Thermocouple sensors included
Not Yet Reviewed
$674.00
Full Spectrum Power offers Pulse IPT batteries for a wide range of powersports applications, including street and off-road bikes, scooters, ATVs, UTVs, and snowmobiles from brands like Aprilia, Arctic Cat, ATK, BMW, E-Ton, Honda©, Hyosung, Kawasaki, KTM, Kymco, Polaris, Suzuki, Triumph, Yamaha, Can-Am, Ducati, Harley-Davidson©, Moto Guzzi, and Ski-Doo. Universal battery models are also available. Choose the size and power desired for your vehicle. All Pulse IPT batteries all have the following features: * Universal Charger Capability: Most commercially available battery chargers work with the Pulse IPT batteries *Advanced Case Design: Lighter and stronger than the previous model; it rejects heat, vibration, gas and oil *Advanced Cell Design: Full Spectrum designed the Pulse IPT cells to cope with the demands of motorsports. Every component of the cells are designed and optimized for motorsports, based on a decade of experience building engine start batteries * V Direct Multi Terminal: The solid copper terminals have 4 threaded mount holes. Attach your accessory wires without having to use long screws on one small terminal * V Sleeve Silicon Terminal Covers: Color-coded for polarity, silicon terminal covers protect against short circuits
Not Yet Reviewed
$599.00
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$510.85
—
$573.95
FuelTech FT450/550 Sportsman Datalogging A harnesses are designed around a Big Block Chevy, yet these harnesses have extra-long leads that allow them to be used in numerous other applications. They provide a plug-and-play solution to easily incorporate datalogging into any setup equipped with an FT450 or FT550 ECU. These harnesses come pre-terminated to plug directly into essential data logging input channels and have an extra input connector to add up to two more configurable inputs for sensors or buttons. They're also equipped with two extra connectors that allow the use of 10 outputs to control EFI fuel Injectors, ignition control through a CDI box with points input or smart coils (eight coils on wasted spark is not recommended for carbureted V8 applications). Tech specs: * Harness is set up for either VR or Hall effect cam and crank sensors and includes two relays with built-in fuses for main electronics, injectors, and coils * FT450 connector (FT550 A connector) * CPC firewall connector * Each connector has its own label and harness insulation is heat, moisture, and oil-resistant * Pre-terminated connections: for Wide Band 02 Sensor x2, Oil Pressure, Fuel Pressure, Engine Temperature and Transmission Temperature * Drive shaft sensor/2-step connector * Extra Inputs connector: 2 configurable inputs for sensors or buttons * Extra Outputs connector: For DIY expansion to control EFI fuel injectors or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Ignition Expansion Connector: For DIY expansion to control ignition or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Comes with two 40A relays and fuses to power everything—the relays power the ECU, Wideband Nano O2, Peak and Hold drivers, sensors, and extra connectors Contents of package: * Harness and instruction manual
Not Yet Reviewed
$799.00
TCI Extreme Racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These starters are new, not rebuilt. They not only reduce front-end pounds for better weight distribution, but they will also provide extra room for headers, oil pans, and increased ground clearance as well. TCI Extreme Racing starters are built with full ball bearings for less friction and more torque, a heavy-duty contact disc solenoid for more consistent starts, and a high-temperature, epoxy-encapsulated armature to resist heat and vibration. Their efficient design draws less amperage, leaving more power for your ignition system to keep you in the race.
( 3 )
$509.95
International Scout owners, your day is here! Davis Unified Ignition now offers International D.U.I. distributors--compact, one-piece ignition systems--for your International V8 and 4-cylinder engines. These D.U.I. distributors are designed to be virtually water, mud, and vibration-proof, with the electronic components protected inside of the distributors. And setup is easy--run one 12 V hot wire to the D.U.I.s, and you are ready to go! A tach hookup is also provided. They feature a 50,000 V coil and a high-output Dyna Module that work together to produce a longer duration spark, allowing the spark plug gaps to be opened up to a whopping .055 in. The larger spark plug gap burns the fuel mixture more completely, giving you more power. A hotter spark also keeps your plugs cleaner longer. Every D.U.I. is hand-assembled to exact tolerances--there is no mass-production. The units are calibrated on a distributor machine with a super-smooth advance curve, providing you with instant throttle response and more power, while eliminating damaging detonation. There will be no trial and error for you--the advance curve is already dialed in. Built for durability, they have both an upper and lower oil-impregnated bushing and include a heavy-duty cap and rotor with solid brass terminals in your choice of red, black, blue, yellow, or clear. Install added performance for your Scout with Performance Distributors International D.U.I. distributors.
( 16 )
$529.00
—
$555.00
Davis United Ignition Ford Street/Strip D.U.I. distributors are performance replacements for your daily driver, street rod, or off-road vehicle. Rated at up to 7,000 rpm, these simple all-in-one ignition systems have the coil inside the cap and the module inside of the distributor; drop them in, run one 12 V wire, and you're off with 50,000 V of pure spark energy! The high-voltage coil allows for wider spark plug gaps, while the increased dwell in the D.U.I. Dyna-Module produces a hotter spark to deliver the most complete burn of your fuel mixture. Street/Strip D.U.I. distributors are tuned for several Ford motor applications, creating a super-smooth advance curve and eliminating engine damage. They're built tough with oil-impregnated upper and lower bronze bushings for shaft stability, accurate trigger signals, and years of trouble-free service. D.U.I. caps are offered in red, yellow, black, blue, and clear—so you can watch the sparks fly! Give your ride more power, crisper throttle response, and more low-end torque with a Ford Street/Strip D.U.I. (Davis Unified Ignition) distributor from Performance Distributors.
( 78 )
$509.00
—
$525.00
On Sale
When tested against a competitor's coil, the MSD Pro Power coils produced 33 percent more current at the plug. They have an oil-filled insulated polyester case, an extra-tall high-tension spark plug tower to stop voltage leaks, and rubber shock mounts. They're designed for drag race use only, with MSD 7 and 8 Series ignitions.
( 41 )
$1,099.95
$733.46
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech FT450/FT550 6-cylinder universal A harnesses have all the components needed to make a plug-and-play installation on an engine with a standard setup. The connectors, relays, and fuses are directly built-in and can be used with nearly any application with six injectors and six coils. They can be used with high or low impedance injectors, and the harnesses are set up for either VR or Hall effect cam and crank sensors. FuelTech 6-cylinder A harnesses include three relays with built-in fuses for main electronics, injectors, and coils, and the insulation and connectors are moisture, heat, and oil-resistant.
Not Yet Reviewed
$759.00
Land Rover and Range Rover owners, rejoice! Your high performance needs are being met with Davis Unified Ignition Land Rover D.U.I. distributors. Finally, there are distributors designed to improve fuel mileage, horsepower, and torque with 50,000 V of pure energy. They are complete ignition systems in a simple unit that is virtually water, mud, and vibration-proof with a Dyna-Module and high-volt coil located inside of the distributor. This energy combo allows you to open the gap on your plugs for a longer-duration spark and the most complete combustion of fuel mixture possible for a difference in power that you can feel! With a Sun distributor machine and information about the vehicle and engine, Performance Distributors dial-in an advance curve that will provide instant throttle response and more power throughout the rpm range without any pre-detonation. Hand-built to exact tolerances, these distributors feature both upper and lower oil-impregnated bronze bushings for shaft stability, accurate trigger signals, and years of trouble-free operation. Your Rover can now enjoy the high performance of D.U.I. distributors from Performance Distributors.
( 1 )
$555.00
—
$699.00
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 521 )
$541.60
—
$573.95
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech FT450/550 4-cylinder universal A harnesses can be used with both the FT450 and FT550 ECUs in a complete plug-and-play style. They fit systems with up to four injectors and four individual smart coils, wired in semi-sequential fuel injection and wasted spark ignition. They can be used with high or low impedance injectors; low impedance requiring the use of a peak and hold driver; high impedance requiring a peak and hold jumper harness (both sold separately). The harnesses are set up for either VR or Hall effect cam and crank sensors and include three relays with built-in fuses for main electronics, injectors, and coils. FuelTech universal 4-cylinder A harness has a label for each connector and the insulation is heat, moisture, and oil-resistant.
Not Yet Reviewed
$549.00
These PerTronix billet plug and play distributors feature the Ignitor II electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.
( 6 )
$526.25
If light isn't good enough, and really light still doesn't quite make it, Tilton's extra-light XLT Super Starters are for you. They have permanent-magnet motors and put out a full 1.6 hp, yet they weigh only a feather-light 7 lbs. They're also very compact, which can free up much-needed clearance for headers or a big oil pan. On top of that, most are "clockable" for multiple choices of solenoid positioning, to help get you even more clearance. They're recommended for engines up to 400 c.i.d.
( 1 )
$565.25
These Meziere True Start 100 series high-torque starters are recommended for all high-compression and supercharged applications. They use an optimized gear reduction to provide maximum engine cranking speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. The massive 9310 heat-treated, lock-up sprag and large rollers provide the strongest possible clutch mechanism in the industry. Meziere True Start 100 Series high-torque starters feature an offset designs to clear most kickout-style oil pans.
( 3 )
$679.06
The Detail Zone Ford 5.0 EFI injector harnesses are designed exclusively for Stinger Performance's PiMPxs full sequential MegaSquirt-based systems. The engine harnesses are complete with circuits for electric fan, fuel pump, water temperature/oil pressure, and alternator. They include enough high-temperature zip loom and harness wrap tape to complete the installation once lengths and layout have been verified. The Detail Zone's wrapped EFI harnesses for Stinger Plug-in MegaSquirt Powered systems also include a firewall grommet and complete instructions.
Not Yet Reviewed
$617.35
These Pico starter cables feature a rope-stranded, pure copper conductor to deliver maximum current. They have a tough PVC outer jacket cover that is designed to resist acids, oils, and other abrasive liquids. Available in black or red, these Pico starter cables will provide the optimum efficiency and long life that you've been looking for.
( 3 )
$691.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
