Availability
Summit Bucks
ACDelco GM Genuine Parts Diesel Exhaust Fluid (DEF) supply pump modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles, and they will provide the same performance, durability, and service life you expect from General Motors. Select the DEF pump module designed for your diesel vehicle.
( 10 )
$738.99
Tune your carburetor or fuel injection system with Daytona Twin Tec WEGO III wide-band exhaust gas oxygen sensor systems. These stand alone units have built in data logging so you can analyze the data logged and make the corrected changes. Daytona Twin Tec WEGO III wide-band exhaust gas oxygen sensor systems will log over 2 hours of data including AFR, and engine RPM. They are available in a single channel or dual channel unit. Other features: * Includes WEGO III unit, Bosch LSU4.2 wide-band oxygen sensor (2 for dual channel), 18x1.5mm weld nut (2 for dual channel), and software on CDROM. * Unit can be programmed to display Lambda or correct AFR values for any hydrocarbon fuel with a known stoichiometric ratio * Suitable for motorcycle, automotive, and other small engines * Measurement range is 10.3 to 19.5 gasoline AFR or 0.70 to 1.33 Lambda * Bright daylight readable blue LED display with automatic dimming * Built in USB interface * Fully encapsulated with water proof LED display
Not Yet Reviewed
$614.95
AiM Sports sixth generation lap timer, MyChron6 2T, integrates advanced technologies, making them powerful data analysis centers capable of providing increasingly accurate and detailed information from different sources. AiM Sports MyChron6 2T lap timers offer high-precision GPS, 6-axis IMU, Bluetooth connectivity, a second CAN for additional sensors, a long lasting battery, and manages two temperature sensors. They are designed with five individually configurable RGB LEDs that you choose the color and value thresholds for their activation, plus two alarm RGB LEDs, an ambient light sensor, and eight backlit colors to customize your screen. They have 4GB of memory, a rechargeable lithium battery with approximately 20 hours of life, and are IP67 rated. Features and benefits: * Five individually configurable RGB LEDs can be configured to show your best lap/split time, monitor RPM level, and even indicate the right moment for gear shift * Two alarm RGB configurable LEDs can customize behavior based on water temperature or other parameters * Ambient light sensor makes brightness and contrast ideal in all light conditions * Dedicated pages make information monitoring easy and prompt * Bluetooth connectivity * Wi-Fi offers easy wireless data download * Two temperature inputs * Second CAN connection is dedicated to connect external modules requiring CAN communication protocols * USB-C connection allows you to charge your logger, and permits data storage in the optional massive 16 GB dedicated memory module * Inertial platform--6-axis 50 Hz Inertial Measurement Unit (IMU) provides information to control the engine and behavior of the chassis * Upgraded GPS--internal, high precision, 25 Hz four-navigation satellite system (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track. The precision of the calculated lap times is 1/100 of second. * Track database can recognize the finish line coordinates of thousands of tracks all over the world * Data analysis--data can be downloaded (via cable, Wi-Fi, or Mini USB storage) and analyzed in depth on your PC with RaceStudio 3 software
Not Yet Reviewed
$759.00
AiM Sports sixth generation lap timer, MyChron6, integrates advanced technologies, making them powerful data analysis centers capable of providing increasingly accurate and detailed information from different sources. AiM Sports MyChron6 lap timers offer high-precision GPS, 6-axis IMU, Bluetooth connectivity, a second CAN for additional sensors, and a long lasting battery. They are designed with five individually configurable RGB LEDs that you choose the color and value thresholds for their activation, plus two alarm RGB LEDs, an ambient light sensor, and eight backlit colors to customize your screen. They have 4GB of memory, a rechargeable lithium battery with approximately 20 hours of life, and are IP67 rated. Features and benefits: * Five individually configurable RGB LEDs can be configured to show your best lap/split time, monitor RPM level, and even indicate the right moment for gear shift * Two alarm RGB configurable LEDs can customize behavior based on water temperature or other parameters * Ambient light sensor makes brightness and contrast ideal in all light conditions * Dedicated pages make information monitoring easy and prompt * Bluetooth connectivity * Wi-Fi offers easy wireless data download * One temperature input * Second CAN connection is dedicated to connect external modules requiring CAN communication protocols * USB-C connection allows you to charge your logger, and permits data storage in the optional massive 16 GB dedicated memory module * Inertial platform--6-axis 50 Hz Inertial Measurement Unit (IMU) provides information to control the engine and behavior of the chassis * Upgraded GPS--internal, high precision, 25 Hz four-navigation satellite system (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track. The precision of the calculated lap times is 1/100 of second. * Track database can recognize the finish line coordinates of thousands of tracks all over the world * Data analysis--data can be downloaded (via cable, Wi-Fi, or Mini USB storage) and analyzed in depth on your PC with RaceStudio 3 software
( 1 )
$659.00
Vehicles today are built with an abundance of control modules (computers), all working to maintain the essential, as well as standard features you enjoy, need, and have become dependent upon. Mopar Replacement offers a huge selection of modules to keep you safe and happy. Their heat seat control modules will make sure you always have a warm comfy seat when the temperatures outside start dropping. Each one is designed and engineered to provide the correct fit and function, matching that of the original they are replacing. The smart option to restore the optimal performance of your Mopar is with Mopar Replacement modules.
Not Yet Reviewed
$713.99
Are you in need of an air-fuel-ratio monitor kit for your HP Tuned vehicle? Measure your AFRs with extreme precision using Ballenger Motorsports' AFR500v3 wideband control kits preconfigured specifically for vehicles using HP Tuners' software. As one of the most critical tools a tuner requires for properly calibrating a vehicle, the AFR500 air fuel ratio monitor provides professional grade measurement of air-fuel-ratio without breaking the bank. Ballenger AFR500v3 kits offer a linear analog output to be used as an input to engine control systems, gauges, or data acquisition systems. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. Key features and benefits: * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Display gasoline (standard) * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Digitally derived output with a higher resolution digital/analog converter * 4 times the measurement resolution (4096 increments compared to the previous 1024) * ASIC chips (a common point of failure from electrostatic damage) have been replaced with a custom board providing better protection and upgrade capabilities * Ability to display from 0.0 to 6.0 in lambda setting for better flexibility with alternate fuels, such as diesel * Ability to upgrade firmware for future sensor types * All harnesses, control units, accessories, etc. are backward and forward-compatible * Options are selectable at any time via internal jumpers * NTK Calibration grade sensor highly recommended for low AFR methanol applications
Not Yet Reviewed
$549.99
On Sale
The Edge EZX module is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed for dealer service work. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also allows you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. EZX offers features the competition just can't at a price point that's hard to beat! NOTE: When paired with the Insight CTS3 in kit form, the two devices still work independently of each other; and the Insight CTS3 will be used for monitoring only. All EZX control is still accomplished via the smartphone app and steering wheel. Product features: * 5 power levels adjustable on-the-fly through steering wheel controls * Engine high idle adjustable through steering wheel controls when in Park * User-adjustable throttle booster settings in each power level via app (Economy, Drive, Sport, Performance, Extreme) * Tire Size Speedo Calibration via app (Up to 40 in. tire size) * Tire Pressure Monitoring Sensors Enable/Disable, Warning On/Off, and Pressure Threshold adjust via app * Gear Ratio Calibration via App * Engine Coolant Protection Enable/Disable via app (Module adds no power until 120 degree ECT, backs down power at 240 degrees ECT) * Button Recall Enable/Disable via app; remembers Tow/Haul and Exhaust Brake settings * Turbo Timer Setup and Enable/Disable via app; once enabled, feature will work on every engine shutoff cycle * Max Cruise set speed adjustable via app (Set max cruise speed at 40-97 mph) * Fog Beams with High Beams Enable/Disable via app * Gear Display in Drive on factory display Enable/Disable via app * Manual DPF Regen via app * Read and clear ECM/TCM diagnostic codes via app * Check Emissions Readiness monitors via app
( 8 )
$649.95
—
$749.95
$529.95
—
$673.95
FAST has revolutionized the tuning industry with the most advanced, app-based, wireless air/fuel meters, in both dual and single sensor options. These kits use an underhood-mounted Bluetooth module, connected to Bosch LSU 4.9 oxygen sensors in one or both of your engine's exhaust outlets—giving you the full story on the state of your engine's tune. With the dual sensor unit, you can read both wideband oxygen sensors individually, or average them together for super accurate readings of the engine's true air/fuel ratio. Easy to use with any iOS or Android device, the FAST wireless air/fuel meter app includes a simple, built-in data logger that records up to two minutes of air/fuel and RPM data. Fuel calibrations are preloaded for measuring gasoline, all popular ethanol blends, methanol, diesel, and more. Advanced features include 0-5 V output for external data loggers and digital gauges. Additionally, a selectable module output is provided that can be used as: an RPM-activated window switch; a lean air/fuel ratio safety cut-off; or an innovative anti-theft feature. This would allow you to manually activate/deactivate a vehicle immobilizing relay—a simple way to protect your vehicle from theft! Additional details: * Monitor air/fuel ratio directly from any iOS or Android smartphone * Supports all popular fuel types * Clean install, no extensive wiring or permanent gauges needed * Includes oxygen sensor bungs and 39.37 in. of sensor wiring With features unlike anything else on the market, it's clear that FAST wireless air/fuel meter kits are the best choice for the serious engine tuner.
( 4 )
$551.95
—
$734.95
These mini starters from Chevrolet Performance feature a compact design that delivers plenty of torque and increased clearance for extended oil pans and header exhaust systems. These lightweight and powerful starters rely on a 3.75:1 gear reduction to spin a high-compression engine.
( 17 )
$510.56
Looking for a solution to measure your vehicle's air-fuel ratio with CAN configuration? Designed for professional tuners and DIY enthusiasts alike, Ballenger AFR500CANv3 wideband monitor kits provide plug-and-play digital CAN Bus messaging and the ability to configure for CAN-enabled systems with specific presets for HP Tuners, making them a seamless and convenient option for measuring air-fuel-ratio in your HP Tuned build. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. They come equipped with PC software for programming your CAN or OBDII message structure--no adapters or extra hardware are required for PC programming. Key features and benefits: * CAN flying lead and USB programming harness * PC software for full digital programmability * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * Display lambda * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * CAN specific manual addendum * HP Tuners/OBDII CAN connection * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Programmable CAN termination resistor * Sensor averaging filter setting * Oxygen percent output * Fault condition diagnostics * IP, pump cell current output * Sensor temperature output * Heater duty cycle output * Battery voltage output
Not Yet Reviewed
$639.98
Mopar Replacement nitrogen oxide sensors detect the amount of NOx gas being emitted from diesel engines. Each sensors information is used by your vehicles engine control module (ECM) to adjust various parameters and reduce those harmful exhaust gas emissions. They are manufactured to OE specifications and designed to fit your specific Mopar application.
Not Yet Reviewed
$506.99
—
$658.99
Have you ever had a tune-up on your engine that was just perfect? Or, did you spend the time and money to dyno your engine? Wouldn't it be nice to go to the track and get back to that same tune-up every single time? With the Computech EGT Plus (exhaust gas temperature) monitor kits you can make sure that your vehicle is tuned correctly, week in and week out. Choose the EGT Plus monitor kit that suits your needs and get ready to tune your fuel system with confidence to maintain the performance edge and consistency you need to be a winner! Additional features of the EGT Plus monitor kits include: * Available with single or dual probes * Available in weld-in or clamp-on styles * Unit monitors dual temperature channels * Power source through 9 V battery or 12 V vehicle supply * Continuous mode--simple maximums * Record switch mode -- Choose when to record -- Maximum temperature and rpm * Trans-brake mode -- Launch temperature and rpm -- Finish line temperature and rpm -- Maximum temperature and rpm -- Time maximums occurred -- Notable time, temperature, and rpm
( 2 )
$519.95
—
$629.95
Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.
Not Yet Reviewed
$699.00
On Sale
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$999.95
$549.95
—
$649.95
Manufacturer Rebate
Innovate LM-2 Ultimate shop kits set you up to dial in maximum horsepower. The Ultimate shop kits are available in single or dual channel versions and include 18 ft. sensor cable, exhaust clamp, inductive clamp, and bung/plug. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
Not Yet Reviewed
$626.99
FAST XFI EGT (Exhaust Gas Temperature) modules allow XFI owners to monitor up to eight EGT sensors without requiring the use of the eight square auxiliary XFI inputs. The modules utilize a small, thin cable to communicate through a high-speed CAN (Controller Area Network) connection protocol at 500 kbps. They measure and transmit data from k-type thermocouples with a range of 32 to 1,670 degrees F (0 to 910 degrees C). Once transmitted, the data is available for viewing and logging through either the XFI or the FAST dash logger. FAST XFI EGT (Exhaust Gas Temperature) modules are available individually with wiring harness and manual, or in kits that also include fittings and thermocouplers.
Not Yet Reviewed
$649.95
On Sale
Upgrade your vehicle with Stillen's TruControl line of inline power modules and release its true potential. By seamlessly integrating into the factory wiring harness and fine-tuning crucial parameters, the modules unlock streams of performance throughout the entire power band. And you'll be up and running in just 15 minutes without any special tools, splicing, or soldering. Even better, TruControl by Stillen inline power modules won't jeopardize your factory warranty. Simply remove the module before visiting the dealership for service, and your warranty remains intact, allowing you to enjoy the perks of enhanced power and performance worry-free. Stillen TruControl inline power modules are the easiest and most affordable upgrade available for your car, truck, or Jeep. Select the one designed for your vehicle. Features and benefits: * Very easy installation; does not alter the factory ECU * Bluetooth integration * Free app with smartphone integration * No wiring or specialty tools required * Easy removal and reversible to maintain factory warranty * Over-the-air custom tuning file for Stillen aftermarket parts (exhaust, intake, etc.)
( 1 )
$649.00
$519.20
Racepak V-Net EGT junction boxes provide a smart single-wire connection to your drag racing vehicle network (V-Net). Available as pug-and-play assemblies or individual components pre-programmed for your convenience, these sensors measure the data and the modules that convert the signal from the sensor, so that it can be transmitted. Available as individual or grouped thermocouples for each cylinder or bank of cylinders. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT junction boxes.
Not Yet Reviewed
$619.95
Lowdoller Motorsports K-type EGT probes, based on their design and materials, offer benefits that include high accuracy, rapid response time, and robust construction for motorsports applications. The Lowdoller probes use an Inconel sheath, a nickel-based super alloy known for its high-temperature strength and corrosion resistance. This allows the probes to withstand the extreme temperatures that are found in both high-performance and race engines. Leveraging on the reliable and widely used K-type thermocouple technology, these probes provide precise exhaust gas temperature (EGT) measurements, which are critical for both engine tuning and health.
Not Yet Reviewed
$638.50
—
$649.00
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$544.99
—
$547.99
On Sale
DiabloSport Predator 2 Platinum programmers are your custom tuning devices for both diesel and gas cars, trucks, and SUVs. Their P2 Platinum units offer the perfect tuning solution for enthusiasts that plan to add future upgrades, or have already upgraded their vehicles with aftermarket performance parts. They come pre-loaded with performance tunes designed to make the most of the stock setup and simple bolt-on parts like an intake or exhaust. When the serious mods come out, the DiabloSport P2 Platinum programmers really shine! Their nationwide network on CMR custom tuning dealers can write a custom tune designed with your mods in mind to make the most power possible! With custom tuning solutions available from DiabloSport's network of CMR dealers, you can tune for basically any upgrade you can think of. With their simple drag and drop custom tune loading process, you can be tuning your custom built ride in minutes. Predator 2 programmers now pair impressive data logging capabilities with the ability to store over 10 custom tunes on the device. You can keep multiple tunes on hand for any track condition or driving situation. With the easy-to-use, handheld design, you can tune in minutes and transform your ride into a Predator! Features include: * Pre-Loaded tunes for multiple driving styles * Easy-to-navigate user interface * New design with a slim, sleek, case that fits in the palm of your hand * Stores custom tunes, from third party dealers, using DiabloSport's CMR tuning suite * Store multiple tunes on device * Monitor and log up to 16 plus vehicle parameters * Reads/clears diagnostic trouble codes * USB connection for updates and downloads * Offline drag and drop tune installation
( 19 )
$549.95
On Sale
MSD Power Grid Dual NTK Wideband O2 modules are plug-and-play units that monitor and record the air/fuel ratio (AFR) of internal combustion engines. These dual channel air/fuel ratio systems are designed to seamlessly interface with MSD's Power Grid system controller (sold separately). They come with an extension harness, the sensors, connectors, and other parts necessary to accurately measure the AFR of vehicles running on gasoline and fuel containing alcohol. Features: * Plug-and-play Power Grid module * Works seamlessly with additional MSD Wideband oxygen sensor modules * No set up or calibration required (free air calibration is optional for added precision) * Can be expanded to operate with a second sensor * Fully potted and sealed unit with automotive-grade connectors * 0.5 to 4.5 V analog output voltage for a gauge or data acquisition * LEDs to monitor system operation and health * High-speed data acquisition (when used with the Power Grid controller) * Back pressure compensated AFR when used with optional exhaust pressure module (sold separately)
( 1 )
$799.95
$718.95
On Sale
SCT X4 Power Flash programmers arrive to you pre-loaded with dyno-proven tune files for select vehicles, to unlock your vehicle's hidden potential! Programming your vehicle with one of SCT's pre-loaded tune files is as easy as 1-2-3. Simply plug the OBD-II connector into vehicle's OBD-II port, select the pre-loaded tune files using the simple to navigate menu and in minutes the X4 programs your vehicle for your particular driving style. Additional features and facts about SCT X4 Power Flash programmers include: * Stores up to 10 custom tune files * Full color LCD display * High-speed data logging/monitoring * Reads/clears DTC trouble codes * Dual analog inputs * Most popular vehicles supported * Installs quickly and easily * Easy restoration back to stock * User adjustable vehicle parameters * USB Interface cable included
( 98 )
$599.00
$539.10
Monitor your rides critical systems and performance with Racepaks IQ3 dash displays. IQ3 displays are completely customizable, allowing you to monitor the information you want in real time while placing info on multiple pages allows you to organize the information and avoid clutter. Racepak helps avoid the clutter associated with wiring as well by utilizing their V-Net cable system. The unique pass though wiring allows you to hook multiple sensors together in series leaving only one wire that needs run to the display or data logger. The display is powerful enough to be used as a standalone, real time gauge system or with any V-Net compatible data logger. The user can even define alarms to alert them to a problem and shift lights to maximize your performance. Take control of your racecar, hardcore offroader or street car with Racepaks IQ3 dash displays.
( 6 )
$749.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
