Availability
BangShift Billy Bars offer wireless power where you need it most. The rugged, wireless button panels give you fast, reliable control over four 30-amp circuits--without the hassle of running wires through your dash, firewall, or interior panels. Designed for performance, flexibility, and clean installs, Billy Bars are the ultimate solutions for anyone who's tired of messy wiring or unreliable switches. Whether you're building a street car, race car, overlander, boat, truck, UTV, ATV, or off-road rig, BangShift Billy Bars let you control your accessories, like fans, lights, pumps, or power valves, from wherever they're mounted. No more snaking wires through tight spaces or worrying about electrical failures. Just solid, secure control … wirelessly. Each system includes a Billy Bar 4-button wireless panel, receiver, wiring harness with high-quality wire and Deutsch connectors. Available with different power lead lengths, select the one to best fit your project. Features: * Trigger up to four individual 30-amp accessories--directly or through relays--with instant, high-speed signal transmission * Each button is individually encrypted with 16.7 million possible address combinations * With a response time of just 28 milliseconds, the Billy Bar is faster than the blink of an eye * Mount it on your roll cage, dash, center console, door panel, or rear firewall * Durable, purpose-built construction, designed by racers and tested in real-world conditions * Wireless communication from the panel to the receiver keeps your install clean and quick * Minimal footprint and clean design make it ideal for high-performance builds
Not Yet Reviewed
$712.69
—
$728.69
Wilwood has engineered two reverse floor-mount brake pedal assemblies, one with a standard bias adjuster balance bar and the other with a precision Tru-Bar. Both models incorporate an adjustable clutch pedal assembly. Wilwood floor-mount 2-pedal assemblies feature lightweight aluminum frames with high-strength reinforced I-beam style forged pedal arms and stainless steel foot pedal pads. The pedal heads adjust vertically to fine-tune the pedal ratio (5.25:1 to 6.00:1) for more feel or less pedal effort. The non-skid waffled pedal pads can be laterally adjusted for driver preference. A clutch and two brake master cylinders (sold separately) mount to the assemblies with the adjustable balance bar or the friction-free, trunnion-based adjustable Tru-Bar balance bar, providing front-to-rear brake bias fine tuning. Both the balance bar and Tru-Bar incorporate a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Select the Wilwood 2-pedal assembly with the brake pedal option desired. Key features and notes: * Adjustable pedal ratio * Adjustable foot pads * Forged aluminum pedal arms * Adjustable clutch stop * Wilwood's own black e-coat finish * Triple high-strength steel master cylinder mounts -- Traditional flange mounts at a 45-degree angle -- Accommodates three Wilwood compact remote master cylinders (sold separately) * Balance bar utilizes a pin and clevis pushrod attachment system -- Ensures the smallest possible misalignment angle for bind-free operation through the entire range of travel * Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm with spherical rod-end bearing pushrod attachments -- Reduces compliance and friction for more accurate brake feel -- Pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar-style pedals
Not Yet Reviewed
$659.95
On Sale
MSD has raised the bar with their 6M-3L marine ignitions. They are fully-sealed units featuring single wiring connectors that make installation a breeze. Each ignition box is designed with three rotary dials and an LED display to simplify setting the cylinder select, start retard, and rev limiter--plug-in rev limiter chips and hard-to-read dials are a thing of the past. For diagnostic purposes, the LED displays can also be set to a "live" tachometer mode on V8s and will even display the battery voltage with just a quick turn of a knob. Boasting more features and higher spark energy than its predecessor, MSD 6M-3L marine ignitions are definitely performance upgrades your boat needs! Additional features and benefits include: * Large, easy to read LED display * Shift interrupt feature eases shifting * MSD's smoothest rev limiter yet, protecting parts and saving your engine * Records highest rpm the engine turned for last 20 minutes of run time * Easy setup of features with three rotary dials on the face of the unit * Built-in start retard adjustable in 0, 10, or 20 degree increments for quick, easy starts and extended starter life * LED display shows rev limit, highest rpm turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy and easy starting down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Fully potted housing to withstand demanding marine conditions * Sealed connector for clean wiring and trouble-free operation * Works on 4, 6, and 8 cylinder engines * Reverse polarity and overheat protection provide ultimate reliability * Can be triggered by magnetic pickup, amplifier, and points inputs
( 1 )
$599.95
$538.95
On Sale
Holley LS extended-length main engine harnesses are 22 in. longer than previous harnesses. Designed to fit most 24x and 58x LS engines from 1997-2012, they are a perfect fit for installers wanting to mount any Holley EFI ECU inside of the passenger compartment where it is away from the elements, and easy to access, such as on a roll bar or under the passenger seat. Notes: * Plug-and-play with Dominator, HP, Terminator X, and Terminator X Max ECUs * LS1/6 harness interfaces with 24x crank and 1x cam sensors * LS2/3/7 harness interfaces with 58x crank and 4x cam sensors
( 1 )
$672.95
$604.95
MSD's DIS Series ignition control boxes are designed to easily convert an early style engine from a conventional distributor and single coil setup to eight individual coils. One coil per cylinder means no moving parts in a distributor to control the timing and no cap and rotor to wear-out. Timing is digitally controlled ensuring precision accuracy at all rpms and every firing. The DIS has advanced timing and rev-limiter functions for racers such as individual cylinder timing: timing retards for boosted and nitrous applications, a two-step rev-limiter, and launch control to get your car out of the hole and even data acquisition to help keep everything in check. Additional features and benefits: * Fully programmable 2D and 3D Timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Easily converts to a coil-per-plug ignition system * Preprogrammed timing maps * Built-in 2.5 bar Manifold Absolute Pressure (MAP) sensor for boosted applications * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable Max Rev and launch rpm limiters provide engine protection * Consistent Holeshot, thanks to Programmable Launch Timing Retard * Single timing step retard ideal for pulling timing for nitrous applications * Data acquisition allows you to keep an eye on all aspects of the ignition * Optional temperature sensor input to control timing based on temperature * Complete kits with all required components available
Not Yet Reviewed
$619.95
On Sale
Introducing the Superchips TrailDash 3 computer programmers for Jeep Wrangler and Gladiator! Built off the success of their TD2, the all-new TD3 offers a state-of-the-art display with a high-res 5 edge-to-edge full-color swipe screen. Using the latest monitoring technology, TD3 offers a clean and sharp display unlike anything on the market for Jeep owners today. The new, larger processor means faster tune loads, quicker response times, and the best user experience Superchips has ever offered. TD3 is also now Wi-Fi equipped, making internet updates a breeze. The new screen layout has been perfected to complement the look and feel of your Wrangler and Gladiator. The all-new CRAWL screen offers easy access to the data and off-road features you need most, like Sway Bar Disconnect, Axle Lockers, TPMS Disable, Rock Lock, Line Lock, and Engine Idle Up. Of course TD3 still offers tire size and gear ration adjustment—along with tried and true performance tuning for better power, torque, and mileage from your Jeep regardless the situation. You can also optimize your experience with the addition of a broad array of EAS accessories for extra power switches, back-up camera, and additional pressure or temperature sensors. Remember, 2015-21 Wranglers and Gladiators do require a PCM swap process and a unique set of steps required before tuning. It is extremely important you review and understand the steps required before you enjoy the tremendous power and functionality now available with TD3. Order the model recommended for your Jeep.
Not Yet Reviewed
$679.00
—
$699.00
$610.95
—
$628.95
On Sale
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$632.95
BangShift Billy Buttons are wireless solutions that enable you to trigger any 12 to 24 V system or accessory in your car, truck, 4x4, or recreational vehicle. They can be used with line locks, trans-brake, nitrous activation, lights and light bars, horns, blinkers, winches, air compressors, and more. BangShift Billy Button wireless button systems are offered with high or low amperage power harness options made with high-quality TXL wire. Choose the amperage harness based on your application needs. Features and notes: * Each kit includes four buttons, transmitter, receiver, universal transmitter mount, single-wire antenna for optional use, and TXL wiring harness with Deutsch connectors. * High-amperage option -- Designed for powering accessories and devices directly -- Can power four 30-amp circuits -- Includes 2 ft. 4-gauge power cable * Low-amperage option: -- Designed for low-draw circuits (less than 2.5 amps), like ECU inputs and relay triggers -- All low-amp harnesses come with wires pinned, but not installed into their respective connectors -- Includes 4 ft. 14-gauge power wire, 2 ft. 18-gauge ground wire, and 4 ft. 18-gauge signal wire (unpinned)
Not Yet Reviewed
$608.70
MechMan offers high-output alternators in a variety of styles, including 240 amp, 320 amp, and 370 amp versions. They can provide a 50 percent increase in amperage output vs. the stock originals. These robust alternators feature pure copper oversize diode rectifiers for outstanding durability. Higher output alternators provide more electrical support for aftermarket accessories such as light bars, winches, fridges, air compressors, inverters, large stereos, and more! Models are available for replacement or upgrade on many car, truck, van, and Jeep applications.
( 8 )
$519.00
—
$549.00
The mission of Altronics PowerQuest switch panels is to equip your race car with performance electronics that are easy to use and affordable. These complete stand-alone systems replace your primitive mechanical "rocker" switches with state-of-the-art touch screens and solid-state digital switching technology. PowerQuest supplies you with six preset and two user-defined channels and each can be preset for 1-30 amps, which means that you will no longer be replacing blown fuses. There is no PC required for setup; everything is done through the touch screen buttons. Altronics PowerQuest switch panels bring you modern, efficient performance, many options, and ease of use, all at a competitive price--mission accomplished. Features include: * Press one button to start engine * Operate multiple electrical devices, including water, fuel, fan, lights, ignition, and other options * Automatic switches can be time-delayed to turn on after Start button is pressed--allows for easier engine cranking before ignition, and fuel is enabled with less risk of flooding * Resettable solid-state fuse allows you to preset 1-30 amps on each channel * Switches can be limit programmed (e.g., water pump will turn on when water temperature is above 120 degrees F) * Switches feature soft start option to eliminate in-rush current when load is first turned on * Switches can be set for momentary or toggle operation * Works with gloves * Water temperature sensor included
Not Yet Reviewed
$799.99
Monitor your rides critical systems and performance with Racepaks IQ3 dash displays. IQ3 displays are completely customizable, allowing you to monitor the information you want in real time while placing info on multiple pages allows you to organize the information and avoid clutter. Racepak helps avoid the clutter associated with wiring as well by utilizing their V-Net cable system. The unique pass though wiring allows you to hook multiple sensors together in series leaving only one wire that needs run to the display or data logger. The display is powerful enough to be used as a standalone, real time gauge system or with any V-Net compatible data logger. The user can even define alarms to alert them to a problem and shift lights to maximize your performance. Take control of your racecar, hardcore offroader or street car with Racepaks IQ3 dash displays.
( 6 )
$749.95
XS Power Titan8 lithium batteries are designed for peak power. This Lithium Titanate Oxide (LTO) Series uses a very high-power lithium cell that is designed for very high-burst output (up to 100 times its capacity) as well as very high-charge current (30 to 60 times its capacity). This translates to a single 10Ah module that can support burst current up to 1,000 amps and can accept 300 amps of continuous charge current. The built in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. Each module comes standard with a built-in balancing system and can be upgraded to include Bluetooth connectivity that allows remote cell monitoring, internal temperature sensing, battery health monitoring, and can be configured to send notifications to any tablet or smartphone when any user preset limit is met, including low voltage, over temperature, overcharge, etc. XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in that are suitable for use in the factory under hood position.
( 3 )
$599.99
—
$699.99
On Sale
FiTech Ultimate TPI standalone ECUs bring an old GM TPI-controlled engine (L98, LB9) into modern times. These standalone EFI kits plug into all existing sensors on a GM TPI engine and provides complete control of the engine. From timing control to self-learning fueling, FiTech Ultimate TPI standalone ECUs deliver new life into the GM TPI engine.
( 9 )
$847.00
$719.95
Braille Battery Endurance batteries are quality-built from recycled lead and plastic, equaling a lower cost for you and a benefit for the environment. Technically registered as a "sealed valve regulated" design, their patented AGM technology completely eliminates corrosion on terminals. They're environmentally safe and do not need filling or maintenance. These batteries are available in popular Group 34, Group 48, and Group 49 sizes. They offer direct replacement installation with exclusive performance features that benefit anyone looking to upgrade their vehicle's electrical system for better operation and safety.
Not Yet Reviewed
$531.99
Dozens of sensors, lights, motors, and switches—nearly every accessory on your vehicle is powered through a wiring circuit. When any of those electrical components begin to fail, Motorcraft wiring connectors can help restore proper operation. For repairs or replacement on Ford, Lincoln, and Mercury vehicles, in particular, Motorcraft carries a full line of wiring pigtails and connectors for countless applications, using technologies that exactly replicate the OEM products. Depend on Motorcraft for precision electrical parts with the fit, form, and function you need!
( 8 )
$591.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
