Availability
Showing In Stock Items. Show All 22 Items.
Painless Performance 27-Circuit Classic-Plus Chevy chassis harnesses are designed to fit the 1955, 1956, and 1957 "Tri-Five" models (150, 210, Nomad, and Bel Air)—and they include additional circuits for power options and accessories. The harnesses feature a factory location Painless mounting plate for the fuse block, front and rear lighting sockets, factory and aftermarket instrument cluster harnesses, and dash and turn signal connectors. They utilize GM color-coded high-grade TXL wire with the circuit identification printed on it for easy installation.
( 10 )
$605.99
On Sale
MSD offers these Power Grid 7 ignition boxes as part of the Power Grid 7 ignition system. These ignition boxes pack higher output than other current programmable units. When used with the Power Grid 7 system controller, these USB-compatible boxes offer advanced programming for ultimate control over your rpm and timing. They provide five retard stages for nitrous and four steps of rpm limits for burnouts, spool, launch, and overrev. MSD Power Grid 7 ignition boxes' output switch can be set on rpm, pressure, or time. Power Grid 7 ignition boxes have shift light settings for each gear, and the ignition data acquisition accepts multiple runs.
( 11 )
$718.95
$646.95
On Sale
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$649.95
$583.95
Digital Guard Dawg 2Go Keyless PBS-II push-button start systems expand your possibilities with five output channels to remotely control power locks, shaved doors, power windows, and remote trunk release—all from one iTag transmitter. Using advanced RFID technology (Radio Frequency Identification), the PBS-II systems completely eliminate your vehicle's ignition key switch and provide proximity-controlled automatic operation of your entire ignition. Simply carry one of the digital RFID iTags with you. As you come near your vehicle, the PBS-II verifies your identity, authorizes your ignition, and with just the push of a button your engine roars to life! Features include: * Four onboard high-current 60A relays * Dual mode RFID transmitters provide both manual and automatic operation * OEM Style Remote Transmitters with built in Hide-A-Key * 5 Output Channels for Lock, Unlock, Trunk, Aux 1 + a Proximity ON Channel * Emergency Bypass Card assures starting even if you lose your RFID transmitter * A single iTag can be programmed to operate an unlimited number of vehicles
( 4 )
$598.99
AiM Sports sixth generation lap timer, MyChron6, integrates advanced technologies, making them powerful data analysis centers capable of providing increasingly accurate and detailed information from different sources. AiM Sports MyChron6 lap timers offer high-precision GPS, 6-axis IMU, Bluetooth connectivity, a second CAN for additional sensors, and a long lasting battery. They are designed with five individually configurable RGB LEDs that you choose the color and value thresholds for their activation, plus two alarm RGB LEDs, an ambient light sensor, and eight backlit colors to customize your screen. They have 4GB of memory, a rechargeable lithium battery with approximately 20 hours of life, and are IP67 rated. Features and benefits: * Five individually configurable RGB LEDs can be configured to show your best lap/split time, monitor RPM level, and even indicate the right moment for gear shift * Two alarm RGB configurable LEDs can customize behavior based on water temperature or other parameters * Ambient light sensor makes brightness and contrast ideal in all light conditions * Dedicated pages make information monitoring easy and prompt * Bluetooth connectivity * Wi-Fi offers easy wireless data download * One temperature input * Second CAN connection is dedicated to connect external modules requiring CAN communication protocols * USB-C connection allows you to charge your logger, and permits data storage in the optional massive 16 GB dedicated memory module * Inertial platform--6-axis 50 Hz Inertial Measurement Unit (IMU) provides information to control the engine and behavior of the chassis * Upgraded GPS--internal, high precision, 25 Hz four-navigation satellite system (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track. The precision of the calculated lap times is 1/100 of second. * Track database can recognize the finish line coordinates of thousands of tracks all over the world * Data analysis--data can be downloaded (via cable, Wi-Fi, or Mini USB storage) and analyzed in depth on your PC with RaceStudio 3 software
( 1 )
$659.00
On Sale
These Edge Comp modules maximize engine efficiency by monitoring the rpm, timing, turbo boost pressure, and fueling parameters. The modules use this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump. The Edge Comp modules feature five power levels with power gains ranging from 40-120 hp. Each of the five power levels has an independent 5-level adjustable responsiveness setting, providing for a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low-boost smoke control, no matter what additional power modifications have been made to the engine. The Comp modules are fully adjustable on the fly, and mount inside the cab.
( 1 )
$779.95
$700.95
AiM Sports sixth generation lap timer, MyChron6 2T, integrates advanced technologies, making them powerful data analysis centers capable of providing increasingly accurate and detailed information from different sources. AiM Sports MyChron6 2T lap timers offer high-precision GPS, 6-axis IMU, Bluetooth connectivity, a second CAN for additional sensors, a long lasting battery, and manages two temperature sensors. They are designed with five individually configurable RGB LEDs that you choose the color and value thresholds for their activation, plus two alarm RGB LEDs, an ambient light sensor, and eight backlit colors to customize your screen. They have 4GB of memory, a rechargeable lithium battery with approximately 20 hours of life, and are IP67 rated. Features and benefits: * Five individually configurable RGB LEDs can be configured to show your best lap/split time, monitor RPM level, and even indicate the right moment for gear shift * Two alarm RGB configurable LEDs can customize behavior based on water temperature or other parameters * Ambient light sensor makes brightness and contrast ideal in all light conditions * Dedicated pages make information monitoring easy and prompt * Bluetooth connectivity * Wi-Fi offers easy wireless data download * Two temperature inputs * Second CAN connection is dedicated to connect external modules requiring CAN communication protocols * USB-C connection allows you to charge your logger, and permits data storage in the optional massive 16 GB dedicated memory module * Inertial platform--6-axis 50 Hz Inertial Measurement Unit (IMU) provides information to control the engine and behavior of the chassis * Upgraded GPS--internal, high precision, 25 Hz four-navigation satellite system (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track. The precision of the calculated lap times is 1/100 of second. * Track database can recognize the finish line coordinates of thousands of tracks all over the world * Data analysis--data can be downloaded (via cable, Wi-Fi, or Mini USB storage) and analyzed in depth on your PC with RaceStudio 3 software
Not Yet Reviewed
$759.00
American Autowire severe-duty relay panels will drive all of your power accessories in the most rugged environments. The waterproof panels feature all-new, compact, fully sealed enclosures that house eight 35 amp ground-triggered relays. These kits include all of the terminals, seals, and cavity plugs for unused circuits to keep your connections weatherproof—plus plenty of tough GXL wire in assorted colors and sizes (18 gauge - 10 gauge) to keep all of your circuits easily identifiable. American Autowire severe-duty relay panel kits also feature: * Fully sealed relay box rated to 180 amps of total output * Eight 35 amp relays, each protected by 30 amp fuses * Five fully sealed connectors—two for input power, and three for output circuits * Eight normally open ground-activated circuits, and also six normally closed ground-activated circuits are available
( 1 )
$545.30
On Sale
MSD Digital E-Curve distributors will drop right into your engine and fire up with three simple connections! Not only are there no external controls or boxes to mount and connect, but you can set a timing curve with the twist of a rotary dial! That's right, no more springs or stop bushings to fumble with. A new digital module lets you select from 20 different "centrifugal" curves and five vacuum curves--that's 100 combinations! Simply remove the cap to access the rotary dials and select a curve to match your application. You can also set an rpm limit that will protect your engine from over-rev damage caused by a missed shift or driveline failure.
( 36 )
$849.95
$749.95
—
$763.95
On Sale
Dinan Power Control Units deliver more power and more features with improved reliability and drivability than ever offered before, proving performance without sacrifice is alive and well! Dinan Power Control Units (PCUs) are in-line tuning modules based off over a decade of lessons learned in the category. At their core, the plug-and-play control units install between select sensors and the ECU, adjusting these signals to achieve increased performance that the stock programming is unable to approach. What sets them apart is their integration into more than just the fundamental boost sensors, but also additional connections--inclusive of OBDII, resulting in a more capable system that does more than just increase power. Dinan PCUs are controlled by a free Bluetooth app, available for both iOS and Android, and is home to all the potent features the device offers. Equipped with five different pre-set performance levels, you can use your smart phone and PCU app to change performance levels on the fly, revert to stock, set boost by gear, as well as monitor vehicle health via logging, customizable gauges, and code reading/clearing, ensuring a seamless tuning experience that even a novice can be comfortable with. Lastly, safety and reliability have been cornerstones of the Dinan brand for generations and not only does the Dinan PCU not hinder any factory safeguards or emissions controls but incorporates its own safety features as well. Going one step beyond our own internal protections, the PCUs also grant the end user the ability to monitor up to 20 different engine parameters in real time via customizable in-app gauges for verification of worry-free operation. Those same parameters can also be logged/viewed in app (or exported to CSV) for further scrutiny if desired. Dinan Power Control Units are available with a 2-year unlimited mileage product warranty or a 4-year/50k factory matching new car warranty. Select the Dinan PCU with the preferred warranty.
Not Yet Reviewed
$699.95
$628.95
Painless Performance Trail Rocker Jeep JK accessory control systems allow you to control up to eight accessories on your Jeep. They feature a waterproof housing that surrounds the power center with eight fuses and relays. Controlling that unit are five pre-wired switches mounted in your custom dashboard panel for a clean, factory look. The power center provides you with all necessary weatherproof connectors and wiring to control your Jeep accessories--from lights to air lockers.
( 7 )
$524.99
—
$574.99
Kleinn ProBlaster compact dual train horn kits include two tuned black ABS trumpets. This set provides everything necessary for a clean installation, while also being compact enough to fit most vehicles. They include a 150 psi, 1.5-gallon air system. Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order the Kleinn ProBlaster compact dual train horn kits. More product features, items, and specifications include: * High-impact ABS horn sizes – 15.5 in. x 6.5 in. 6.5 in. and 10.5 in. x 4.5 in. x 6.0 in. * Air compressor – 150 psi (8.25 in. x 4.00 in. x 6.25 in.); 25 percent duty cycle rating; 17-amp draw * Air tank 6275RT with five 1/4 in.-NPT ports; 1.5 gallons (15.0 in. x 6.0 in. x 8.0 in.) * Pressure switch (120 psi on/150 psi off) * Maximum input rating – 150 psi * Rating for cfm at 0 psi –2.03 * Output –152.7 at 100 psi * Output –154.2 at 150 psi * Drain valve, safety valve, and other fittings * High-pressure nylon air tubing and horn push-button * Wiring/installation kit * Detailed installation instructions
( 1 )
$549.95
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
( 2 )
$599.95
—
$799.91
On Sale
SCT Livewire TS performance programmer and monitors let you tap your ride's hidden performance and excitement! SCT Livewire plus touch screens are easy to set-up, use, and navigate to quickly upgrade your boring factory-calibrated vehicle computer for a high performance driving experience. These tuner kits are available for both gas and diesel vehicles plus they include a windshield mount to keep your data at eye level. You're not like everyone else and your driving experience doesn't need to be mediocre! Power tune with SCT Livewire TS Plus performance programmer and monitors. SCT Livewire TS Plus features: * Color 4 in. touch screen display * Rear view camera input * Automatic on/off/sleep mode * Holds up to 10 custom tunes * Reads and clears DTC codes * Built-in performance calculator * High-speed data logging and monitoring * User adjustable tune options * User selectable graphics and gauge layouts * User adjustable warnings/alerts * Adjust for different size fuel injectors * Disable CMCV to prevent CEL * Remove, increase, or decrease vehicle's speed limiter * Increase or decrease idle speed * Disable traction control * Add or remove timing by rpm range * Add or remove fuel at wide open throttle * Change transmission shift pressure - automatic transmissions only * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Stores vehicle's stock file before programming * Supports and holds custom tunes * Adjust electric fan engagement temperature Custom Tune File Adjustable Options: * Increase or decrease idle speed * Remove, increase, or decrease vehicle's rpm limiter in Drive * Remove, increase, or decrease vehicle's rpm limiter in Neutral * Remove, increase, or decrease vehicle's speed limiter * Adjust electric fan engagement temperature * Add or remove fuel at wide open throttle * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Increase or decrease the wide open throttle shift points of each gear individually * Change transmission shift pressure - automatic transmissions only
( 53 )
$599.00
$539.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
