Availability
Showing In Stock Items. Show All 60 Items.
Are you in need of an air-fuel-ratio monitor kit for your HP Tuned vehicle? Measure your AFRs with extreme precision using Ballenger Motorsports' AFR500v3 wideband control kits preconfigured specifically for vehicles using HP Tuners' software. As one of the most critical tools a tuner requires for properly calibrating a vehicle, the AFR500 air fuel ratio monitor provides professional grade measurement of air-fuel-ratio without breaking the bank. Ballenger AFR500v3 kits offer a linear analog output to be used as an input to engine control systems, gauges, or data acquisition systems. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. Key features and benefits: * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Display gasoline (standard) * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Digitally derived output with a higher resolution digital/analog converter * 4 times the measurement resolution (4096 increments compared to the previous 1024) * ASIC chips (a common point of failure from electrostatic damage) have been replaced with a custom board providing better protection and upgrade capabilities * Ability to display from 0.0 to 6.0 in lambda setting for better flexibility with alternate fuels, such as diesel * Ability to upgrade firmware for future sensor types * All harnesses, control units, accessories, etc. are backward and forward-compatible * Options are selectable at any time via internal jumpers * NTK Calibration grade sensor highly recommended for low AFR methanol applications
Not Yet Reviewed
$549.99
Looking for a solution to measure your vehicle's air-fuel ratio with CAN configuration? Designed for professional tuners and DIY enthusiasts alike, Ballenger AFR500CANv3 wideband monitor kits provide plug-and-play digital CAN Bus messaging and the ability to configure for CAN-enabled systems with specific presets for HP Tuners, making them a seamless and convenient option for measuring air-fuel-ratio in your HP Tuned build. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. They come equipped with PC software for programming your CAN or OBDII message structure--no adapters or extra hardware are required for PC programming. Key features and benefits: * CAN flying lead and USB programming harness * PC software for full digital programmability * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * Display lambda * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * CAN specific manual addendum * HP Tuners/OBDII CAN connection * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Programmable CAN termination resistor * Sensor averaging filter setting * Oxygen percent output * Fault condition diagnostics * IP, pump cell current output * Sensor temperature output * Heater duty cycle output * Battery voltage output
Not Yet Reviewed
$639.98
Lokar drive-by-wire electronic throttle controls are the first programmable electronic throttle controls for the automotive aftermarket. These billet aluminum controls feature a non-contact, solid-state Hall effect sensor and are available, pre-programmed, from the factory for most GM, Ford, and Mopar applications. These controls are programmed to optimize electrical output for quicker throttle response, producing no pedal lag and three times the performance of OEM pedals. They also offer improved operator control and pedal stability over rough terrain making them ideal for high performance and off-road applications. The controls include an application-specific pedal wiring harness that works in conjunction with the OEM or aftermarket EFI wiring harnesses. These Lokar electronic throttle controls are available with a brite or black anodized finish and are designed for use with one of Lokar's drive-by-wire pedal assemblies which are sold separately and available in a variety of styles and finishes to match your custom application.
( 8 )
$594.95
HalTech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
Not Yet Reviewed
$550.00
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
HalTech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$550.00
Mopar Replacement nitrogen oxide sensors detect the amount of NOx gas being emitted from diesel engines. Each sensors information is used by your vehicles engine control module (ECM) to adjust various parameters and reduce those harmful exhaust gas emissions. They are manufactured to OE specifications and designed to fit your specific Mopar application.
Not Yet Reviewed
$501.99
Standard Motor Products fuel pressure sensors ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel system. If your sensor is faulty, Standard Motor has a line of replacements to fit numerous models.
( 3 )
$606.99
—
$607.99
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$500.99
—
$572.99
Standard Motor blind spot detection sensors are direct-fit OE replacements to ensure proper fit and function. They monitor the sides of your vehicle to notify the driver of unseen obstacles—helping you to avoid accidents, minor rear-end collisions, and inaccurate parking, as well as making safer lane changes on the highway. These blind spot detectors have a plug-and-play design for easy installation. Order the model recommended for your vehicle application.
( 1 )
$501.99
—
$747.99
Granatelli offers innovative mass airflow sensors as an upgrade for your stock MAF. The sensors feature state-of-the-art hybrid electronics, which provide improved ignition and injector timing control that results in a 10 to 15 hp gain at the rear tires. They're easy to install and housed in a rugged, injection-molded body to reduce heat soak, which is a common problem with stock metal sensors.
( 6 )
$500.65
Get your vehicle running smoothly again with an Cardone remanufactured mass airflow sensor. These economical MAF sensors precisely track OE output curves and maintain spec tolerances to ensure accurate scan tool readings for proper operation. All critical components are 100 percent re-soldered to ensure excellent electrical connections, and tested with automated computerized equipment for functionality and reliability. Sensors are tested on vehicles to ensure form, fit, and durability. Meet all performance requirements throughout the entire operating range of your vehicle with Cardone remanufactured mass airflow sensors.
( 27 )
$508.99
—
$639.99
Mopar Replacement ABS modules are genuine OE replacements. That means your Chrysler, Dodge, Fiat, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These modules are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Order the ABS module recommended to fit your application.
( 14 )
$706.99
Wilwood has engineered two reverse floor-mount brake pedal assemblies, one with a standard bias adjuster balance bar and the other with a precision Tru-Bar. Both models incorporate an adjustable clutch pedal assembly. Wilwood floor-mount 2-pedal assemblies feature lightweight aluminum frames with high-strength reinforced I-beam style forged pedal arms and stainless steel foot pedal pads. The pedal heads adjust vertically to fine-tune the pedal ratio (5.25:1 to 6.00:1) for more feel or less pedal effort. The non-skid waffled pedal pads can be laterally adjusted for driver preference. A clutch and two brake master cylinders (sold separately) mount to the assemblies with the adjustable balance bar or the friction-free, trunnion-based adjustable Tru-Bar balance bar, providing front-to-rear brake bias fine tuning. Both the balance bar and Tru-Bar incorporate a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Select the Wilwood 2-pedal assembly with the brake pedal option desired. Key features and notes: * Adjustable pedal ratio * Adjustable foot pads * Forged aluminum pedal arms * Adjustable clutch stop * Wilwood's own black e-coat finish * Triple high-strength steel master cylinder mounts -- Traditional flange mounts at a 45-degree angle -- Accommodates three Wilwood compact remote master cylinders (sold separately) * Balance bar utilizes a pin and clevis pushrod attachment system -- Ensures the smallest possible misalignment angle for bind-free operation through the entire range of travel * Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm with spherical rod-end bearing pushrod attachments -- Reduces compliance and friction for more accurate brake feel -- Pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar-style pedals
Not Yet Reviewed
$659.95
Summit Bucks
Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.
( 99 )
$600.99
The variable valve timing solenoid alters the supply of oil pressure to the camshaft depending on the engine's speed and load and can either advance or retard cam position, which provides several benefits, including improved engine operation increased engine power, reduced fuel consumption, and decreased emissions. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts variable valve timing solenoids offer superior coverage for domestic and import applications. Order the model designed to fit your application needs.
( 1 )
$523.99
KW EDC delete units eliminate persistent trouble codes that exist when upgrading the suspension on your vehicle with electronically regulated dampers. With these electronic damping cancellation kits, the functioning of the control unit remains completely intact. They're available for several applications, including a variety of Corvette models. The solution whereby the serial damper regulation is shut down—while avoiding trouble codes—is a KW EDC delete unit.
Not Yet Reviewed
$583.95
Dorman cruise control distance sensors are designed to match the fit and function of the original sensor on specified vehicles, and are engineered for durability and reliable performance. These replacement sensors restore functionality for an original part that has failed from an electrical malfunction or collision. Order the model recommended for your application.
Not Yet Reviewed
$584.99
—
$606.99
Standard Motor mass airflow sensors are higher quality, precision alternatives to remanufactured models. MAF sensors measure the amount of airflow entering the intake manifold and must communicate clearly with your vehicle's Engine Control Module (ECM). Remanufactured components with debris from prior use can hinder this communication and cause your vehicle to experience drivability issues. With many new—not remanufactured—MAF sensors in the Standard lineup, they cover more than 90 percent of all MAF-equipped vehicles, and all are airflow-calibrated to ensure accuracy. SMP-manufactured sensors are designed with improvements such as thicker walls, upgraded components, and a custom-designed platinum RTD sensor. The result is a line of MAF sensors that provide highly accurate readings and precise airflow output under all operating conditions. Order the model designed for your car, truck, or van.
( 2 )
$515.99
—
$640.99
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$646.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$541.99
—
$671.99
Standard Motor battery current and voltage sensors measure the temperature of the battery, regulating voltage to the vehicle charging system to function properly at all times. Standard Motor ensures these sensors are direct-fit, by testing every unit before it is packaged. These sensors are unrivalled for fit, form, function, and quality. Replace your worn or faulty battery current and voltage sensor with one from Standard Motor.
Not Yet Reviewed
$562.99
—
$572.99
One of the best creature comforts ever invented for drivers is cruise control. Standard Motor Products offers a full line of replacement cruise control distance sensors for fitment on a variety of vehicles. These precisely engineered sensors undergo rigorous testing to meet or exceed OE specs. Standard Motor cruise control distance sensors make long drives comfortable and safe.
Not Yet Reviewed
$504.99
—
$759.99
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$507.99
—
$656.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
