Summit Racing SpeedCard - learn how to get 10% back up to $100

Summit Racing SpeedCard - learn how to get 10% back up to $100

Beef up Your Bronco With These Deals - Shop Now!

12 Results Found For "tool"

Part Groups

Results 1 - 12 of 12

Ford Performance Parts 2.7L Bronco Performance Calibrations

Enhance the performance of your 2.7L engine in your late-model Bronco! The Ford Performance engineered and dyno-tested calibration delivers their promise of more power and increased performance without sacrificing reliability. Product details: * Improved throttle response throughout RPM range * Optimized shift schedule * Peak torque = 433 lbs.-ft. at 3,500 rpm * Peak power = 355 hp at 5,500 rpm * Ability to change tire size up to BFG 37x12.5R17 KO2 (579 revolutions per mile). Additional modifications required. * Ability to change axle ratio/FDU up to 5.38 * Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module * For U.S. and Canadian vehicles * Not available in California for 2022-23 model year vehicles * M-12655-F ProCal 4 delivery tool included * The M-9603-B23 calibration is also available * Premium fuel required NOTES: *Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur. * Calibration and ProCal 4 tool are VIN locked. * ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode." * ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.

Not Yet Reviewed

$754.99

Ford Performance Parts 2018-23 Mustang 2.3L EcoBoost Performance Calibration Kits

Ford Performance Parts offers performance calibration kits for 2018-23 Mustang 2.3L EcoBoost cars with manual or automatic transmissions (not for use with 2020-23 2.3 HO). The programmers enable horsepower and torque gains throughout the powerband—35 hp peak gain at 2,900 rpm, and 76 lbs.-ft. torque peak gain at 2,600 rpm. Additional product details: * Exclusive Ford Performance warranty when dealer installed * 50 state legal with CARB EO (D-752-17) * Automatic calibrations feature optimized performance shift schedule * Powertrain calibrations are developed and supported for U.S. and Canadian vehicles * Premium (91 octane or higher) fuel only * Horsepower and torque gains will not be optimized until fuel octane is learned Kit includes: * Pro Cal 4 calibration delivery tool * Ford Performance high-flow performance air filter * Calibration voucher

4.5 out of 5 stars ( 2 )

$735.99

HP Tuners VCM Suite MPVI3 Credit Pro Packages

The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.

4.67 out of 5 stars ( 52 )

$599.95

$799.91

Ford Performance Parts 3.0L Bronco Performance Calibrations

Upgrade your Bronco Raptor 3.0L EcoBoost engine's capabilities with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2022-2024 Bronco Raptor * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * Elevates throttle response for an exhilarating driving experience * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.

Not Yet Reviewed

$734.99

Ford Performance Parts 3.5L F-150 Raptor Performance Calibrations

Enhance your 3.5L EcoBoost engine's performance in your F-150 Raptor with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance to fit 2021-2023 Raptor F-150 equipped with 3.5L engine only * Peak power = 466 hp @ 5,500 rpm, +26 hp @ 3,250 rpm * Peak torque = 554 lbs.-ft. @ 3,250 rpm, +54 lbs.-ft. @ 2,500 rpm * Improved throttle response throughout the rpm range * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool with mounting bracket included * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: For Raptor F-150 equipped with 3.5L engine only. ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.

Not Yet Reviewed

$735.99

Superchips Flashpaq Tuner With Locksmith Kits

The much-anticipated Superchips Flashpaq tuner for 2019-22 Silverado and Sierra is finally here, with revolutionary in-cab ECM/TCM unlock! Available for 5.3L and 6.2L applications, Flashpaq tuning offers more horsepower and can unlock/flash right from your driveway. The all-new GM Flashpaq performance programmer (P/N 2849-F) comes pre-loaded with tunes developed specifically for daily driving, towing, and performance enthusiasts. The Mileage XS, Tow, 87 Octane, 91 Octane, and 93 Octane tunes offer incredible torque gains throughout the RPM range with the improved drivability you've come to expect from Superchips. This all-new process completely changes everything you once knew about tuning your GM 1500 truck and will lead our industry into the future with even more capabilities, saving you time and money when it comes time to modify your truck. Enable the 'Remember Last Setting' feature that allows your truck to remember your Start Stop and Drive Mode settings every time you start your truck. Superchips can also disable your AFM/DFM systems to maintain V8 mode all the time. Calibrate your speedometer for larger tires or gear ratio changes. Adjust your TPMS settings, even fine-tune your throttle sensitivity with the built-in throttle booster feature. **Device can unlock and tune only one vehicle. Once the ECM is unlocked and flashed, the flash can be returned to factory settings, but the Unlock process cannot be reversed. If VIN lock and ECM Unlock has been completed, device is non-returnable. Product features and capabilities: * Includes ECM and TCM Unlock tool * Performance tuning for economy, towing, daily driving, and extreme tuning * Speedometer correction for changes in tire size and gear ratio * Active/Dynamic Fuel Management control * Remember Last Setting for Auto Start/Stop * Remember Last Setting for Drive modes * Adjustable throttle booster settings * Adjustable TPMS settings 1-90 psi * Adjust speed and rev limiters * Adjust Idle RPM in Park, Neutral and Drive * Read and clear diagnostic trouble codes * Shave .5-seconds off 0-60 times * Carries power curve higher into RPM range * Testing showed +4 mph in 1/4-mile times * High-definition, 2.8 in. color screen * Internet updateable with all-new update software via USB * Supports 5.3L and 6.2L engines along with 6, 8, and 10-speed transmissions

Not Yet Reviewed

$749.95

Ford Performance Parts 3.5L F-150 Performance Calibrations

Upgrade your 2021-2023 Ford F-150's 3.5L EcoBoost engine's capability with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance to fit 2021-2023 F-150 with 3.5L engine (non-Raptor models) * Improved throttle response throughout the rpm range * Peak power = 450 hp @ 5,250 rpm, +55 hp @ 5,250 rpm * Peak torque = 510 lbs.-ft. @ 3,500 rpm, +100 lbs.-ft. @ 2,500 rpm * Improved throttle response throughout the rpm range * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool with mounting bracket included * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: Does not fit 3.5L Powerboost Hybrid engines. Not applicable to Raptor models. Not for use in F-150 Lightning. ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions please contact Tech Line.

Not Yet Reviewed

$792.99

Edge EvoHT2 Programmers

The EvoHT2 is a premium hand-held performance tuner from Edge Products. The new handheld tuner was designed specifically to give you the most power at the best price, with industry-leading service and quality that comes standard with every Edge product. Now with a color screen, upgraded processor, and numerous new features, you literally hold the power to unlock the hidden potential of your truck or SUV's power and fuel economy in the palm of your hand! Edge EvoHT2 features: * Fuel economy and towing capability improvements * Installs in minutes with no tools required * Speedometer calibration for axle gear and tire size changes * Advanced tuning selections from rev limits to shift points * Monitor engine and transmission parameters * Read and clear diagnostic trouble codes * Results and feature set may vary based on vehicle make, model and aftermarket upgrades on the vehicle. Read all instructions before installation and/or operation of this product.

3.25 out of 5 stars ( 4 )

$523.95

$770.95

Stillen TruControl Inline Power Modules

Upgrade your vehicle with Stillen's TruControl line of inline power modules and release its true potential. By seamlessly integrating into the factory wiring harness and fine-tuning crucial parameters, the modules unlock streams of performance throughout the entire power band. And you'll be up and running in just 15 minutes without any special tools, splicing, or soldering. Even better, TruControl by Stillen inline power modules won't jeopardize your factory warranty. Simply remove the module before visiting the dealership for service, and your warranty remains intact, allowing you to enjoy the perks of enhanced power and performance worry-free. Stillen TruControl inline power modules are the easiest and most affordable upgrade available for your car, truck, or Jeep. Select the one designed for your vehicle. Features and benefits: * Very easy installation; does not alter the factory ECU * Bluetooth integration * Free app with smartphone integration * No wiring or specialty tools required * Easy removal and reversible to maintain factory warranty * Over-the-air custom tuning file for Stillen aftermarket parts (exhaust, intake, etc.)

Not Yet Reviewed

$649.00

Edge Diesel Evolution CS2 Programmers

Edge Diesel Evolution CS2 programmers connect to your factory computer via the OBDII/diagnostic port and can read and display up to eight parameters at a time from a list of dozens of available engine parameters. These awesome CS2 units work not just as programmers, but also as scan tools and gauges, making them a 3-in-one value! Edge Products Evolution CS2 programmers feature a full-color, high-resolution 2.4 in. button-controlled screen.

4.2 out of 5 stars ( 10 )

$676.95

Roush 2015-17 Mustang GT Level 1 Performance Pacs

Crank up the power with Roush 2015-17 Mustang GT Level 1 Performance Pacs. These assemblies can increase rear wheel power by 25 hp and 30 lb.-ft. on your stock Mustang GT 5.0L V8. They include Roush CAD-designed and tooled cold air kits that are fully tested and calibration-certified to work seamlessly with their performance ECU re-flash, while adding a sporty sound to your engine. Level 1 Pacs will maximize your underhood space, and the premium automotive-grade, injection-molded material will last a long time. Plus, with a lower intake restriction over stock, you'll never need to upgrade your intake, no matter what mods you plan in the future. Let the experienced engineers from Roush handle the details—you'll get improved horsepower and torque, along with aggressive throttle mapping, a sporty feel, and strong performance without sacrificing drivability. Simply install a Mustang GT Level 1 Performance Pac!

Not Yet Reviewed

$749.99

MSD Single Cylinder Programmable Ignition Boxes

These MSD single cylinder programmable ignition boxes are designed for use on a variety of single cylinder motorcycle type 2 and 4-stroke engines. They deliver increased spark energy and voltage through the entire rpm range and provides the user with a variety of programmable functions including mapping two timing curves, setting a launch rpm limit, using TPS for timing control and more. The MSD single cylinder programmable ignition boxes gives you control over the timing functions of your engine. There are two timing curves that can be switched between through wire activation. Both timing maps allow up to 20 points to be plotted in 100 rpm and 1° increments from 0 – 16,000 rpm and 0-50°. The Brown/White wire is used to switch between Curve A and B. When it is connected to ground, Curve B is selected. These curves can also be set up relative to TPS voltage input from closed throttle to Wide Open Throttle.

5.0 out of 5 stars ( 1 )

$649.95

  • 1
  • Page 1 of 1

Modal Header