Availability
Vibrant Performance braided flex hose are available in stainless steel and nylon braided covers which provide excellent abrasion resistance and surrounds a reinforced synthetic rubber inner liner. Offered in several lengths and AN sizes, they are suitable for oil, water, fuel, methanol, coolant, vacuum service, and E85. Note: These hoses are NOT suitable for use as brake lines or other hydraulic pressure lines, nor are they suited for extended submersion in fuel or oil (not recommended for in-tank applications).
( 82 )
$506.99
—
$815.99
Holley Terminator EFI fuel system plumbing kits provide everything needed for a complete supply fuel system for the Terminator EFI self-tuning engine management system. They are engineered using Holley electric fuel pumps, fuel pressure regulators, and fuel filters, coupled with quality Earl's hose, to provide a fuel system tailored to the needs of your Terminator EFI system. The systems are available with different fuel pumps and types of fuel hose, so you can choose what best fits your application. All Holley Terminator EFI fuel system plumbing kits feature quality Earl's anodized aluminum fittings to get the job done and look good, too.
( 10 )
$725.95
MSD Atomic EFI fuel return line kits are designed to allow you to run a return line with your MSD Atomic EFI system. They include a high-pressure regulator, 15 ft. of 3/8 in. fuel line, and the required fittings for assembly.
( 14 )
$549.95
FiTech stainless steel fuel line kits are perfect for plumbing your vehicle for pump gas, methanol, ethanol, or alcohol. These braided, chemical-resistant flex lines are available in a natural or black finish, and they include aluminum fittings, 40 micron filter, and check valve. Order the fuel line diameter and length needed for your application.
( 2 )
$512.00
Holley EFI fuel system plumbing kits are the perfect complement to your Sniper EFI or Holley EFI kit. These plumbing assemblies are engineered using Holley fuel pumps, regulators, and filters—coupled with Earl's Performance plumbing, to provide a fuel system tailored to your vehicle's specific needs. Components vary, depending on the kit you select.
( 34 )
$528.95
Gotta Show Products A/C hose kits are the real deal when it comes to plumbing the air conditioning system in your hot rod, classic, truck, or custom build. They deliver 100 percent stainless steel construction—not plated—and are ready to polish. All fittings are female O-ring formed, making them compatible with any aftermarket A/C system. These cut-to-fit kits may include hoses, drier fittings, condenser fittings, and bulkhead or evaporator fittings. From the firewall forward, complete your A/C system with Gotta Show hose kits.
( 1 )
$534.99
—
$818.99
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
Continental fuel injection hose is designed especially for fuel injected vehicles. The blue Fluorelastomer nitrile tube is specially compounded to resist gasoline, oil, diesel, and other fuels, while the high-strength synthetic textile reinforcement brings minimum burst to 900 psi. Continental fuel injection hose meets SAE specification J30R9.
( 27 )
$511.99
Vintage Air Stainless Steel ProLine kits take you're climate control install to the next level. Instead of boring old rubber lines under your hood, Vintage Air has assembled these kits with stainless steel tubing, stainless steel TiteFit nuts, braided stainless steel ProLine hose, ProLine fittings, and your choice of 4-way, 2-way, or no firewall bulkhead. Vintage Air ProLine kits will give your ride a serious, professionally finished look! Contents Include: * Choice of bulkhead (4-way, 2-way, or none) * 6 ft. of #6 Stainless steel tubing * 3 ft. of #8 Stainless steel tubing * 6 ft. of #10 Stainless steel tubing * 2 ft. of #6 Standard rubber A/C hose * 2 ft. of #10 Standard rubber A/C hose * 1 ft. of #8 Braided stainless steel A/C hose * 1 ft. of #10 Braided stainless steel A/C hose * 2 #8 Straight Proline hose end fittings * 2 #10 Straight Proline hose end fittings * 1 #6 Straight hose end barb fitting with ferrule * 1 #6 90 Degree hose end barb fitting with ferrule * 1 #10 Straight hose end barb fitting with ferrule * 1 #10 90 Degree hose end barb fitting with ferrule * 4 #6 Stainless steel braze-on line ends * 2 #8 Stainless steel braze-on line ends * 2 #10 Stainless steel braze-on line ends * 4 #6 TiteFit nuts * 2 #8 TiteFit nuts * 2 #10 TiteFit nuts * 2 #8 Stainless steel braze-on nuts * 2 #10 Stainless steel braze-on nuts * 1 134a Braze-on #8 (high side) service port * 1 134a Braze-on #10 (low side) service port * 6 #6 O-rings * 4 #8 O-rings * 6 #10 O-rings * 1/8 oz. Tube of refrigerant oil
Not Yet Reviewed
$539.99
—
$603.99
Vibrant Performance braided PTFE hose present endless ways to build your high performance fluid delivery system. They are available in many lengths and AN sizes with either a stainless steel or nylon braided covering that offers superior protection against abrasion and corrosion. The PTFE inner liner can handle higher operating temperatures, operating or burst pressures, and eliminates vapor fuel permeation. These race-proven hoses are suitable for all types of commonly used race fuels and oils, as well as brake, transmission, clutch, power steering, and coolant fluids. Vibrant Performance braided PTFE hose deliver outstanding quality and options to make your plumbing project a success.
( 38 )
$599.99
—
$759.99
Earl's Performance remote electric water pump plumbing kits simplify the installation of a remote-mounted electric water pump on your LS Series engine. The special adjustable coolant crossover tubes eliminate tees, Y-blocks, and extra hose ends normally used to make all your connections. The block adapters feature -12 AN O-ring ports for easy maintenance and a leak-free seal. You'll appreciate the simple, clean remote electric water pump plumbing these Earl's Performance kits provide for your LS engine. Kit features, items, and specs include: * Billet aluminum construction with black anodized finish for a great look and corrosion protection * 2 adjustable crossover tubes (fitting centers 6.8 to 10.5 in.) * Block adapters with 1/8 in. NPT ports for connection of the steam tube hose * 2 port fittings * Hardware * Inlet/outlet size: -16 AN male flares * Flexible--inlet/outlets can be on either side of the engine * Overall length 9.8 to 13.5 in. (depending on application)
Not Yet Reviewed
$649.95
Too many varying types of hoses under the hood? Fragola Performance Systems Race-Rite hose is designed to be compatible with all pumped fluids, and capable of tight bend radiuses, as well as higher flow rates. It features an enlarged inner diameter with a smoothbore conductive PTFE core that utilizes a convoluted exterior and black aramid braid cover. This hose is available in multiple sizes and lengths to properly fit your application. Enjoy the simplicity of the ultimate fuel, ATF (automatic transmission fluid), and coolant non-pro hoses: Fragola Race-Rite! Features and specs: * Smoothbore conductive PTFE core is resistant to fuel permeation * 60 percent lighter than their 8400 Series black nylon race hose * True-to-size I.D. for improved flow rate * Works with all fluids, including ethanol-type fuels, ATF, coolant, and oils * Operating range -65 degrees to 500 degrees F * Ideal for use with Race-Rite crimp-on hose ends
( 3 )
$556.99
—
$800.99
Too many varying types of hoses under the hood? Fragola Performance Systems Race-Rite PRO hose is designed to be compatible with all pumped fluids, and capable of tight bend radiuses, as well as higher flow rates. It features an enlarged inner diameter with a smoothbore conductive PTFE core that utilizes a convoluted exterior and black aramid braid cover. This hose is available in multiple sizes and lengths to properly fit your application. Enjoy the simplicity of the ultimate fuel, ATF (automatic transmission fluid), and coolant pro hoses: Fragola Race-Rite PRO. Features and specs: * Ideal in dry sump or high vacuum applications * Convoluted exterior with added spiral wire increases hoop strength to prevent hose sucking shut under high vacuum * Added externally wound, spiral wire increases flexibility and bend radius * Smoothbore conductive PTFE core is resistant to fuel permeation * 50 percent lighter than Fragola's 8400 Series black nylon race hose * True-to-size I.D. for improved flow rate * Works with all fluids, including ethanol-type fuels, ATF, coolant, and oils * Operating range -65 degrees to 500 degrees F * Ideal for use with Race-Rite crimp-on hose ends
Not Yet Reviewed
$513.99
—
$795.99
Level 7 Motorsports Pro Series 1973-87 C10 chassis brake plumbing kits were developed specifically for the popular Pro Touring Chevy C10 trucks, and designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look to your classic vehicle. The lines in Level 7 Pro kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they are covered with a special PVC coated material for maximum durability against debris and abrasion. All Pro Series hoses use stainless steel hose ends for many years of corrosion resistance and durability, and they are all DOT approved and crimped by the manufacturer. Included in each kit are the hoses from the Wilwood master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Additional details: * DOT-approved hose kit to plumb your factory 1973-87 C10 chassis * Can use stock front and rear brake hoses * -3 AN adapters included * PTFE hoses, stainless reinforced, and silicone coated * Black in color
Not Yet Reviewed
$774.99
Harness the power of PTFE with Redhorse Performance 302 series PTFE high performance hoses! Engineered for use with RHP's 1200 Series reusable PTFE hose ends, the 302 Series is equipped to handle extremely high-pressure and are fully compatible with all types of fuel. Select the hose diameter and length suited for your application needs. Features and specs: * Features a stainless steel weave over a custom-designed smooth bore dual-layer conductive core PTFE inner-tube that eliminates the risk of electro-static discharge * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * NHRA accepted
( 1 )
$555.66
—
$887.90
Get your ride set up with DeatschWerks DW400 pump module return plumbing kits. Designed to fit the DW400 pump modules, these kits include stainless steel braided flex line, with either PTFE or CPE hose, and the necessary fittings and other components that allow you to achieve the flow you want and fit your ride needs. Fuel delivery is an important aspect to every vehicle, so order the DeatschWerks DW400 pump module plumbing Kit recommended for your application.
Not Yet Reviewed
$649.00
—
$749.00
Redhorse Performance 235 Series black nylon braided hose will keep pace with your racing whether you are using e85, methanol, or regular fuel from the pump. This top-of-the-line nylon braided hose with single stainless steel under-braid features a unique dual layer inner tube, with a layer of Epichlorohydrin (ECO) and a layer of Fluoroelastomer (FKM) for unrivaled fuel compatibility. With a light weight, great looking outer braid, and stainless steel under-braid, along with an advanced inner-tube, the 235 Series hose by RHP offers a sleek clean look without sacrificing performance. Select the hose diameter and length for your application. Features and specs: * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * Engineered for use with RHP 1000 Series swivel seal, 6000 Series non-swivel and 7000 Series crimp style hose ends * NHRA accepted Important Note: Not designed for use on high pressure power steering lines and is not to be used for high pressure hydraulic applications.
Not Yet Reviewed
$540.03
—
$880.37
On Sale
Earl's Performance Pro-Lite Ultra hose is the premier choice for your hot rod or race car. It features advanced designs that make the hose ideal for high-pressure applications up to 500 psi. Their inner tube of oil-resistant "PKR" synthetic rubber won't degrade or leak when exposed to most fluids, and it's reinforced with a stainless steel braid that greatly increases the hoop strength—keeping the hose from bulging or separating from its fittings. Finally, the braided nylon fiber cover is resistant to oil, abrasion, and extreme weather, keeping Pro-Lite Ultra hose looking great and functioning the way it's meant to.
( 3 )
$549.95
—
$673.95
Aeromotive PTFE stainless braided fuel lines are ideal for street and racing applications where E85, gasoline, or methanol compatible fuel hose is needed. The stainless outer braid provides impact and abrasion resistance to protect the PTFE inner liner. These liners are specially carbonized for conductivity, which is critical for fuel handling. The fuel lines provide outstanding flow capacity; they're smaller on the O.D. for the same I.D. of a comparable rubber braided line for easier routing in tight spaces. The lines deliver extended service life in any fuel, as they will not harden, micro-fracture, or permeate fuel vapor (vapor-walk) like normal rubber braided line—minimizing fuel smell in the vehicle storage area. Choose the length and AN diameter needed for your application.
( 8 )
$513.50
NotcHead braided line clamp builder kits are a great and simple way to have everything you need to for your project in one box. This kit includes lots of clips, nuts, fasteners, and self-drilling screws that go with them.
( 1 )
$782.46
For the traditionalist, Russell offers their ProClassic II black hose. If your belief is that the hose you use to plumb your ride or racer should be black, then ProClassic II is for you. The all-black nylon fiber braid of the outer cover wraps around a CPE synthetic inner liner for abrasion resistance. Plus, the chlorinated polyethylene inner liner has a bonded, multi-braid stainless steel wire to improve the bend radius, with less possibility of collapsing when plumbing those tight areas. Safe for fuel, oil, antifreeze, and other fluids, Russell hose is easy to cut and easy to assemble. For classic looks and professional quality you can count on under the hood, choose Russell ProClassic II hose—available in a variety of lengths and AN sizes.
( 39 )
$631.95
—
$832.95
Summit Bucks
More tolerant, more efficient, and 100 percent silicone—Mishimoto radiator hose kits offer a boost of performance and looks under your hood! Combining high-grade silicone and heat-resistant embedded fibers, Mishimoto hoses provide exceptional heat reduction, increased pressure tolerance, and a whole lot of satisfaction. Radiator hose kits are available for a wide range of makes and models in black, blue, red, and limited-edition orange (specific makes only) to enhance the appearance of your engine bay. Some models also include hose clamps. Upgrade the performance and style of your vehicle with superior Mishimoto radiator hose kits.
( 76 )
$669.95
—
$752.95
DeatschWerks X2 Series fuel pump plumbing kits contain all the items you need for the proper install of your X2 pump module—and nothing you don't. DW packages a hard anodized regulator to deliver stable air-to-fuel ratios for optimal performance, a precision fuel pressure gauge, a filter with a meticulously engineered stainless steel element, fittings, and braided stainless steel fuel line that's either PTFE or CPE lined—your choice. Choose the DeatschWerks X2 Series fuel pump plumbing kit best suited for your application.
Not Yet Reviewed
$749.00
—
$799.00
This new Russell ProClassic hose is designed for racers and performance enthusiasts who want high-quality plumbing that is lighter and easier to assemble than traditional braided stainless steel hose. It features a lightweight nylon fiber braid over a durable synthetic rubber core with a maximum pressure rating of 350 psi. Russell ProClassic hose is capable of handling nearly every plumbing task on your vehicle and is safe for water, oil, and antifreeze. The hose is easy to cut, making for quick, easy assembly. Available in a variety of hose sizes and lengths, this Russell ProClassic hose can be used in many different areas.
( 68 )
$605.95
—
$832.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
