Availability
NotcHead hard line clamp builder kits offer everything you need for your project in one box. These assortments contain a selection of all four sizes of clamps, along with nuts, fasteners, and self-drilling screws. Centered set screws mean that you drill and tap holes right where you want your lines to go. Lines easily "snap in" with a push of your finger and eliminate the need for Z-bends to adjust for fittings; once your lines are installed, the set screw is completely hidden from view. The clamps are made from high-strength copolymer acetal plastic with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, and are easy on painted parts. Your plumbing job will be quick, safe, and professional with NotcHead hard line clamp builder kits.
Not Yet Reviewed
$802.23
—
$821.58
NotcHead braided line clamp builder kits are a great and simple way to have everything you need to for your project in one box. This kit includes lots of clips, nuts, fasteners, and self-drilling screws that go with them.
( 1 )
$821.58
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
$673.95
Level 7 Motorsports' Pro Series brake plumbing kits offer a more budget-friendly option over their original chassis plumbing kit without sacrificing fitment and quality. These lines feature zinc-coated steel ends and standard vinyl-wrapped line clamps. Developed specifically for the popular 1967-87 Pro Touring Chevy C10 trucks, short bed and long bed styles, the kits are designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look on your classic vehicle. The lines in these Level 7 kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they're covered with a special PVC coated material for maximum durability against debris and abrasion. The hoses are all DOT-approved and are all crimped by the manufacturer. Included in each kit are the hoses from the master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Select the kit designed for your vehicle. Additional details: * DOT approved hose kit to plumb your factory 1967-87 C10 chassis * PTFE hoses, stainless reinforced, and silicone coated * Black in color * Select kits may include adapters, depending on your application, so stock front and rear hoses can be used * Optional rear whip hose bracket is available for use with rear mounted fuel tanks (factory bracket will interfere with whip hose if using a rear mounted tank) Notes: Brake calipers hoses and rear axle plumbing are not included. Front caliper outlet is relocated to the front of the subframe as opposed to the stock location behind the subframe. This keeps the front caliper hoses from binding.
Not Yet Reviewed
$769.99
—
$801.99
Earl's Performance remote electric water pump plumbing kits simplify the installation of a remote-mounted electric water pump on your LS Series engine. The special adjustable coolant crossover tubes eliminate tees, Y-blocks, and extra hose ends normally used to make all your connections. The block adapters feature -12 AN O-ring ports for easy maintenance and a leak-free seal. You'll appreciate the simple, clean remote electric water pump plumbing these Earl's Performance kits provide for your LS engine. Kit features, items, and specs include: * Billet aluminum construction with black anodized finish for a great look and corrosion protection * 2 adjustable crossover tubes (fitting centers 6.8 to 10.5 in.) * Block adapters with 1/8 in. NPT ports for connection of the steam tube hose * 2 port fittings * Hardware * Inlet/outlet size: -16 AN male flares * Flexible--inlet/outlets can be on either side of the engine * Overall length 9.8 to 13.5 in. (depending on application)
Not Yet Reviewed
$649.95
ICT Billet electric water pump hose kits offer an easier and cleaner way to plumb a remote electric water pump, providing benefits like a more controlled cooling system, faster engine warm-up, and improved engine life. These kits, which use AN fittings and braided hoses, simplify the installation by providing the necessary adapters and hoses to connect the engine water outlets to a remote-mounted electric pump. Key benefits include improved performance and a custom, clutter-free engine bay by eliminating the factory water pump and its associated belt-driven strain. The kits often feature black billet aluminum fittings and corrosion-resistant, braided hoses for a durable and high-quality look. Select the kit designed for your application needs.
Not Yet Reviewed
$539.99
DeatschWerks X2 Series fuel pump plumbing kits contain all the items you need for the proper install of your X2 pump module—and nothing you don't. DW packages a hard anodized regulator to deliver stable air-to-fuel ratios for optimal performance, a precision fuel pressure gauge, a filter with a meticulously engineered stainless steel element, fittings, and braided stainless steel fuel line that's either PTFE or CPE lined—your choice. Choose the DeatschWerks X2 Series fuel pump plumbing kit best suited for your application.
Not Yet Reviewed
$749.00
Earl's Performance Staubli SPT ball locking dry break couplings provide smooth leak-free performance for ethanol, oil, and all fuel types. Their strong aluminum construction and specialty seals ensure longevity while their smaller size eases installation. These lightweight couplings are highly durable, available in a variety of sizes, and designed not to leak with valve disconnection. Keep your vehicle's fluids running safely with Earl's Performance Staubli SPT ball locking dry break couplings.
Not Yet Reviewed
$723.95
—
$749.95
DeWitts Radiator oil cooler line kits include an oil adapter block, GM oil seal, metric bolts, and a 1/8 in. NPT plug. They are designed to bolt directly onto any LS series engine and provide two large -10 AN connections. The adapter has a port for the factory temperature sender and an auxiliary port for other needs. These installation kits also everything needed for hooking up an aftermarket internal oil cooler on your C5 Corvette and the LS-based engines listed in the Applications section.
( 1 )
$519.99
Ranger elevated ATV/motorcycle adapter kits are designed to increase the wheel-clamping capability of the Ranger R745 tire changer. The motorcycle adapter kit is installed over the existing turntable clamping jaws to increase the total external clamping range. The raised height of the motorcycle adapter kit allows motorcycle and ATV wheels to be elevated above the solid rim clamp turntable. In the raised position, rear wheels can be clamped, making sprockets or hubs obsolete. They feature heavy steel construction, plastic wheel grips to prevent damage to expensive wheels, an anodized finish and quick-release, spring-loaded locking pins that keep clamps secured safely to the cable. It's the entire package—exactly what you'd expect from Ranger. Motorcycle and ATV tire changer adapters let you change small, difficult tires the easy way. These elevated expansion clamps include four adapters that fit over the standard tire changer jaws to accommodate motorcycle and ATV wheels, increasing the maximum wheel diameter range an additional 4 inches. Product features: * Set of four clamp adapters for use on Ranger NextGen R745 tire changer * Perfect for motorcycle and ATV wheels * Increases external wheel-clamping capacity 4 in. * Heavy steel construction * Anodized finish * Quick-release, spring-loaded locking pin keeps clamps secured safely to table
Not Yet Reviewed
$675.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
