Availability
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 608 )
$526.00
—
$792.00
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 497 )
$501.10
—
$819.05
Virtually indestructible, Banks Power TorqueTube exhaust headers maximize exhaust extraction, unleashing gobs of torque. Manufactured from 100 percent heavy-wall stainless steel, they are mandrel-formed to tune the exhaust flow for maximum torque in your truck or motorhome. And unlike restrictive stock setups, Banks TorqueTubes literally pull out the exhaust, slashing backpressure and unleashing greater torque, helping the intake stroke to draw in more air. Squeeze more performance out of your engine; choose a pair of Banks TorqueTube exhaust headers designed for your vehicle. Each set may include additional components. Features: * Maximize exhaust extraction * Flanges welded on both sides, then milled flat * Seamless high-velocity collector * Ultra-thick flanges won't warp/flex * No sealant/gaskets needed Please note: Unless otherwise stated, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 11 )
$546.99
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 252 )
$505.55
—
$732.05
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$510.85
—
$775.55
BBK CNC Series short high-flow mid-pipes are designed to work with BBK's full-length headers, and they're available in various designs, such as H-pipe and X-chamber. All are made from heavy-gauge, large diameter aluminized tubing. For a simple bolt-on installation, these mid-pipes are fully CNC mandrel-bent—with the appropriate die-stamped flanges, OEM-style domed ends, or merged step down to allow installation to the factory exhaust system. BBK CNC Series short high-flow mid-pipes offer performance, quality, and value for years of top performance. Features and notes: * Available with high-flow catalytic converters or as off-road race only versions * For use with the stock factory or aftermarket cat-back exhaust systems * CNC mandrel-bent tubing for maximum exhaust flow, horsepower, and torque * Designed to increase performance and add a more aggressive sound over stock
( 8 )
$599.99
—
$649.99
The MBRP Installer Series exhaust systems give you the best of both worlds in one complete package. They provide great sound control—as well as improvements in torque and horsepower. These systems are constructed from heavy-duty, 16-gauge steel with an aluminized coating and an extra-thick layer of aluminum silica on the seams, an area often left exposed to rust. The units are available in hundreds of configurations to suit your vehicle's exhaust needs.
( 406 )
$509.99
—
$784.99
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$605.80
—
$738.45
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 26 )
$702.35
MBRP's PLM Series exhaust systems feature a muffler delete pipe that takes the place of your muffler, providing the ultimate in exhaust flow and sound. By doing so, they increase both horsepower and torque and improve fuel economy. The systems are manufactured from heavy-duty steel pipe with an aluminized coating for maximum protection. Their specially designed 2-piece tailpipe and bolt-on hangers allow for a simple, straightforward installation. These PLM Series exhausts are available in a variety of sizes, styles, and configurations for fitment on specific vehicle applications.
( 35 )
$529.99
—
$679.99
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 993 )
$749.95
$527.95
—
$676.95
MagnaFlow PRO Series DPF diesel exhaust systems feature a muffler-less design with mirror-finish polished, welded intercooled tips. These kits feature mandrel-bent stainless steel tubing in a variety of intermediate and tailpipe diameters. The systems are available in numerous styles, including cat-back, downpipe-back, and turbo-back. MagnaFlow Stainless Steel PRO Series DPF stainless steel exhausts are designed for a wide range of make and model diesel applications to significantly enhance both horsepower and torque.
( 1 )
$548.00
—
$755.00
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 70 )
$522.99
—
$714.99
Patriot full length street rod headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which result in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing that's available in your choice of bare or ceramic coated finishes, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 13 )
$515.45
—
$679.00
Made of 100 percent heavy-gauge aluminized steel, the Armor Lite Series exhaust systems from MBRP are designed to provide cost-conscious consumers with the same high-quality design and craftsmanship as the company's other systems—but at a value price. Armor Lite is suitable for areas with moderate environmental conditions. The high-flow performance systems maximize exhaust flow so your engine keeps its cool with lower exhaust temperatures. The result is greater fuel efficiency, more torque and horsepower, increased throttle response, and a sound that is pure MBRP. These bolt-on systems include stainless steel tips and welded on hangers. Order the model designed to fit your application.
( 13 )
$519.99
—
$839.99
On Sale
Hooker Super Competition Block Hugger headers are a great choice for your custom car, truck, or rod. Ideal for applications where the frame rails are close to the engine block. These headers feature a tucked-in tube design that's perfect for those tight-fit installations! Mandrel-bent, tuned-length primaries decrease backpressure and increase exhaust velocity, improving horsepower, torque, and throttle response. Their collectors are positioned for maximum starter and engine mount clearance; and exit parallel with the oil pan rail to allow for maximum ground clearance. Hooker Super Competition Block Hugger headers come complete with the gaskets, header bolts and collector reducers needed for a successful installation.
( 27 )
$649.95
—
$699.95
$583.95
—
$628.95
aFe Large Bore-HD exhaust systems are constructed from mandrel-bent 409 stainless steel tubing with high-quality band clamps and OE-style bayonet hangers. They use factory mounting locations to provide a quick, hassle-free installation. Also included with many of these diesel systems is a massive wrinkle-black powdercoated or polished 304 stainless steel tip with a laser-cut stainless steel aFe power badge. aFe Large Bore-HD exhaust systems are the perfect combination of performance, fit, and value and feature: * Leak-free 360 degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Large diameter tubing provides maximum flow * Smooth bends for low turbulence, increased horsepower and torque, and lower exhaust gas temperatures (EGTs) * Slash-cut tips with intercooling vents reduce EGTs at the tailpipe (most applications) * Available in DPF-back, cat-back, turbo-back, and downpipe-back configurations (varies by model) * Select systems include dual outlets and exhaust tips Note: Some of these systems are "Race Only" products sold solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 12 )
$523.95
—
$819.00
Increase your car's sound with Digipower USA DPW slim exhaust EVO cutouts! This exhaust cutout exhaust system is designed to allow your high-performance vehicle to transition its exhaust noise from silent to stealthy street racing loud with "one-touch flip switch" controlled by a downloadable, user friendly smartphone app or remote control. The electric exhaust cutouts combine technology and premium-quality craftsmanship with DPW's exclusive DRS Design (double rotation system 360 degrees), allowing an easy installation and mounting customization enabling using different angles and sides for the best fit for your car's exhaust system and precision in its operation. Release your senses! See, hear, and experience DPW slim exhaust EVO cutouts by Digipower USA! Features and specifications: * 100 percent 304 stainless-steel construction—with polished finish * Available in 2.5 in. and 3 in. single or dual exhaust kits (please specify kit needed when ordering) * Exhaust cutouts are 30 percent smaller, and 35 percent lighter than other cutouts * Exclusive DRS design (Double Rotation System)—allows installation on exhaust curves/exhaust straight and on restrict places, always fitting in the best position for your specific application needs * Exhaust note controlled by user friendly downloadable app—or by the remote control * High-torque 12 V DC gear motor—fast and reliable * No exhaust leak noise when closed
( 36 )
$619.00
—
$632.00
JBA Performance Exhaust Evol exhaust systems are tuned and precision-built for each application, so you get a perfect fit and optimized performance every time. They are offered in both bright 409 stainless steel with 304 stainless steel tips and high-quality aluminized steel. The mufflers feature an efficient high-flow design and fully welded cases for long-lasting performance. These Evol exhaust systems increase horsepower and torque throughout the rpm range, improve fuel economy and throttle response, and produce a powerful exhaust tone and enhanced vehicle appearance. Get the power and the sound that you're looking for with the JBA Performance Exhaust Evol exhaust systems!
( 36 )
$510.85
—
$733.65
Look and sound as formidable as you can! With Vance & Hines Bigshot staggered exhaust systems, you can maintain the intimidating look of a 2-into-2 system, while achieving the performance advantages that come with a 2-into-1 race system. These apex-predators feature a proprietary power chamber design, which uses the volume of both mufflers to increase horsepower and torque. The Vance & Hines Bigshot staggered exhaust systems also feature an aggressive sound and offer removable baffles. Your mounting hardware and instructions are also included.
Not Yet Reviewed
$799.99
On Sale
Flowtech Lakester headers deliver classic styling taken from the early dry lake and Bonneville speed racers--perfect for vintage lake-style street rods. They feature high-low, mandrel-bent tubes to provide consistent diameters for smooth flow and increased exhaust velocity. The heavy-duty tubing and high-quality welds guarantee strength and durability. Smooth-transition, 1 5/8 in. diameter primary tubes are used for better exhaust flow--optimizing performance and throttle response, as well as broadening the torque curve. The long-transition velocity collector connects to an undercar exhaust, and the block-off plate can be removed for maximum sound output. The Flowtech Lakester Street Rod headers are TIG-welded, with machined 3/8 in. flanges for a strong, leak-free seal. They also include premium aluminum header gaskets and installation hardware.
( 2 )
$949.95
$522.95
Sanderson Headers QP Series exhaust manifolds, aka "Quiet Performers," are their cast iron header group that overcomes the limitations of tube-style headers in both fit and performance! Sanderson Headers QP1000, 2000, and 1200 exhaust manifold sets are able to produce gains in both low-end torque and high-end horsepower. These manifolds feature individual runners to separate exhaust pulses, cast-in anti-reversion baffling, and a D-port design for improved scavenging. They're also more compact than tubular headers and provide more clearance for your steering setups, accessories, and other chassis and engine components. Plus, some weigh less than your factory headers and all look a whole lot better! Sanderson headers offer the only patented flange leak-free, gasket-free design. For those of you who want to increase the life of your investment and control heat in your engine bay, they offer a multi-layer inside and out silver ceramic coating that is polished to a high luster. Get a tight seal without gaskets and create more torque and power at every rpm range with a set of Sanderson Headers QP Series exhaust manifolds.
( 21 )
$562.00
—
$786.80
Gibson Single exhaust systems are Gibson's most popular exhaust … the systems you can trust when you want reliable performance from your truck. Perfect for towing and general performance applications, Gibson Single exhaust systems use popular Superflow performance mufflers that offer increased power at a cost-effective price. These are Gibson's best performing exhaust systems. Dyno results show that they make maximum torque and horsepower at the lower-end of the power band (1800 to 3000 rpm) with a deep, aggressive exhaust tone. A polished or black ceramic coated T304 stainless steel tip with clamp less connection design is included with each kit. Select systems also include a Xtreme Terrain (XT) tip. These turn-down pipes can be installed in place of the standard tip to provide extra ground clearance for treacherous terrain. Features of Gibson Single exhaust systems include: * Big block sound * Minimal interior sound levels * Heavy-duty aluminized steel or stainless steel tubes for extended durability * Mandrel-bent tubing maintains constant exhaust flow through each bend for outstanding performance * Zinc plated hangers and clamps * Easy, no-drill installation; no welding required
( 255 )
$500.99
—
$808.99
aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 36 )
$541.80
—
$848.40
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
