Availability
Showing In Stock Items. Show All 64 Items.
On Sale
XForce dump pipes allow for easier release of the high pressure built inside the turbo, thus preventing clogging, and allowing the engine to breathe more freely. In turn, you get more horsepower, throttle, and better fuel economy. Manufactured using a specific, clever design, these dump pipes are made of high-quality 304 stainless steel and a mandrel bend construction, whereas stock exhaust pipes are manufactured using mild steel. Ensure the free flow of exhaust gases through your exhaust system for your vehicle's efficient performance with XForce dump pipes! Order the model for your application.
( 6 )
$535.50
—
$719.10
Clearance
Engineered for their diesel exhaust systems, Corsa downpipe kits feature mandrel-bent premium stainless steel construction, crafted with pride and precision. Corsa's reputation ensures great quality and fit for your vehicle, with their innovative straight-through design for greater flow and better performance. Combine Corsa Performance downpipe kits with their cat-back exhausts—for turbo systems with major gains in exhaust flow versus stock systems. These downpipes are available in a variety of configurations for fitment on specific year/make/model vehicles.
Not Yet Reviewed
$1,001.99
$720.50
AWE Tuning offers Performance downpipes for a variety of racing-only applications. Handcrafted from 3 in. diameter .065 in. wall CNC mandrel-bent 304 stainless steel, the downpipes help to produce triple-digit max horsepower and torque gains on some vehicles. Performance downpipes feature custom-engineered, mandatory OE-quality quarter-inch thick dual-layer waffled Inconel heat shielding with internal 3,000 degree F matting—and 200 CPSI HJS HD catalyst cores with tri-lobe matrix. These resonated or non-resonated downpipes provide peace of mind for preventing heat damage to neighboring componentry. Ensure factory-correct fitment; order the kit recommended for your vehicle.
Not Yet Reviewed
$720.00
On Sale
Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.
( 28 )
$619.79
—
$864.79
$579.79
—
$824.79
On Sale
Pypes H-Bomb exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Systems are offered in different styles to cover a long list of years, makes, and models, and they are available without mufflers or with Turbo Pro (T), Race Pro (R), Street Pro (S), or Violator (V) mufflers. All Pypes H-Bomb exhaust systems are fabricated using the highest quality materials; 16-gauge, mandrel-bent, 409 stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower, and the stainless construction enables them to resist corrosion and extend the life of the system. The mufflers, H-pipe, and OEM-style tailpipes are precision matched to deliver the ultimate in sound and performance. Cad plated or stainless clamps, stainless hangers, and polished 304 stainless tips are available and included in many systems. These systems can be installed at home without any special tools. Improve your vehicle's exhaust flow, power, and sound with one of the many Pypes H-Bomb exhaust systems available. Order the perfect fit for your car from Summit Racing®.
( 22 )
$549.79
—
$827.79
$509.79
—
$787.79
MBRP Performance Series exhaust systems maximize exhaust flow and minimize exhaust temperatures. They're manufactured from 100 percent aluminized steel and come standard with MBRP's smaller muffler. Fully sealed tubing adds years to your system, avoiding rust-through on seams. Performance Series units are road, track, and dyno-tested; and they're specially tuned to deliver an aggressive exhaust note. Order the model designed for your specific vehicle. Other features and benefits: * Fully mandrel-bent tubing and minimal bend degree angles increase airflow * Better gas mileage * Bolt-on, no-weld design for easy installation * Direct-fit to the OEM hangers; clamps and accessories included * Available for gas truck and diesel applications * Limited one-year workmanship warranty
( 45 )
$544.99
—
$759.99
MBRP's PLM Series exhaust systems feature a muffler delete pipe that takes the place of your muffler, providing the ultimate in exhaust flow and sound. By doing so, they increase both horsepower and torque and improve fuel economy. The systems are manufactured from heavy-duty steel pipe with an aluminized coating for maximum protection. Their specially designed 2-piece tailpipe and bolt-on hangers allow for a simple, straightforward installation. These PLM Series exhausts are available in a variety of sizes, styles, and configurations for fitment on specific vehicle applications.
( 34 )
$529.99
—
$679.99
On Sale
Pypes High Tuck header/crossmember-back exhaust systems allow for the most ground clearance of any A-body system on the market. The X-pipe pushes the mufflers up into their installation pockets and the tailpipe sits higher coming out of the muffler. No more bottoming out! Pypes High Tuck header/crossmember-back exhaust systems are designed to boost your car's performance to the next level—you will get more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions. Their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
Not Yet Reviewed
$753.79
—
$806.79
$713.79
—
$766.79
On Sale
If you need a high ground clearance (HGC) stainless steel exhaust system that doesn't break the bank, Pypes HGC exhaust systems are the answer. Designed to offer the highest ground clearance of any aftermarket exhaust system, they mount high and out of the way, unleashing extra performance and economy along with great sound. Features of Pypes HGC exhaust systems include: * 304 or 409 stainless steel construction (varies by system) * Mandrel-bent for better performance * Significant weight savings compared to OE exhaust * Tuned for an aggressive sound when accelerating * Dyno-tested and proven to increase horsepower and torque * Muffler included (type varies depending on application) * Easy no-drill installation (some cutting may be required) * Hardware included * Includes tailpipe downturn (tip not included)
( 1 )
$591.79
$551.79
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 930 )
$576.99
—
$874.99
The MBRP Installer Series exhaust systems give you the best of both worlds in one complete package. They provide great sound control—as well as improvements in torque and horsepower. These systems are constructed from heavy-duty, 16-gauge steel with an aluminized coating and an extra-thick layer of aluminum silica on the seams, an area often left exposed to rust. The units are available in hundreds of configurations to suit your vehicle's exhaust needs.
( 404 )
$519.99
—
$784.99
MBRP XP Series exhaust systems are designed to withstand the toughest conditions, on and off the road. Their rugged, thick, 16-gauge stainless steel tubing won't rust through. They feature solid, reinforced welds at vital stress points, making certain that your system stays securely mounted. The MBRP XP Series mufflers and pipes deliver a rich, mellow exhaust note and are finished off with a mirror-polished, stainless steel, rolled-edge exhaust tip. They're available in a wide variety of styles and configurations to fit your specific vehicle.
( 243 )
$669.99
—
$924.99
aFe Takeda exhaust systems are constructed of superior quality mandrel-bent 304 stainless steel and are designed to produce significant horsepower gains. They utilize single and dual, high-flow transverse mufflers. Some models include an X-pipe balance tube, which equalizes and evenly distributes exhaust pulses for increased flow and performance across the power band, while maintaining great sound. The finishing touches on these exhaust systems are their laser-etched, slash-cut polished 304 stainless steel tips. Many options are available, such as cat-back and rear axle-back styles; exit quantity and location; and tailpipe diameters. Order the kit designed for your vehicle application.
( 17 )
$765.45
Made of 100 percent heavy-gauge aluminized steel, the Armor Lite Series exhaust systems from MBRP are designed to provide cost-conscious consumers with the same high-quality design and craftsmanship as the company's other systems—but at a value price. Armor Lite is suitable for areas with moderate environmental conditions. The high-flow performance systems maximize exhaust flow so your engine keeps its cool with lower exhaust temperatures. The result is greater fuel efficiency, more torque and horsepower, increased throttle response, and a sound that is pure MBRP. These bolt-on systems include stainless steel tips and welded on hangers. Order the model designed to fit your application.
( 13 )
$679.99
—
$724.99
MRBP SLM Series exhaust systems are the starting point to getting the most from cold air intakes, programmers, modules, and downloaders. They're constructed to the same specifications as MRBP's top-of-the-line Pro Series. Built from 16-gauge T409 stainless steel with a muffler delete pipe, SLM units are tuned for an aggressive sound and free-flowing performance. Order the model designed for your diesel application. Features and benefits: * More pulling power * Improved throttle response * Greater fuel efficiency * Mandrel-bent tubing; minimal bend degree angles * Gets hot exhaust out fast * Drops exhaust gas temperature by up to 200 degrees F * Direct-fit to OEM hangers * Bolt-on, no-weld installation * Clamps and installation accessories included * MBRP stamped logo on exhaust tip (if tip is included) * Limited 5-year workmanship warranty. (This series may, with time, develop surface rust which is not covered with this warranty.)
( 13 )
$664.99
—
$724.99
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 606 )
$587.00
—
$784.00
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 990 )
$525.95
—
$599.95
Kooks Headers offers a variety of exhaust systems designed for specific vehicles. They feature large diameter 304 stainless steel construction with smooth-flowing mandrel-bent tubing for maximum exhaust flow. Among the options are street and OEM-style replacements, or high-rpm performance and race applications. Choose from styles such as header-back, cat-back, rear axle-back, and full-length. Look over the available options and select the model designed for your vehicle. Depending on the system you order, specs/configurations may include: * One or two mufflers, or a muffler-delete system * Muffler style: wrapped perforated core, turbo, perforated tube, glasspack * Components with a natural or polished finish * Single or dual inlet/outlet * Catalytic converter (where applicable) * Intermediate pipe (where applicable) * Tailpipe; different diameters available * Round tip(s), polished or black coated, various styles Some Kooks Headers exhaust systems are offered in one of three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters that eliminate 90 percent of "Check Engine Light" warnings; designed for naturally aspirated and forced induction engines up to 900 hp Note: Certain exhaust systems may not be legal for sale, installation, or use in certain locales. Check your state and local laws.
( 14 )
$621.68
—
$834.93
Replace your stock exhaust with one of these free-flowing exhaust systems from Summit Racing™. They're designed to clear trailer hitches and spare tires, unless otherwise noted. Our cat-back systems feature mandrel-bent aluminized tubing, single or dual outlets, turbo, chambered or glasspack mufflers, and all hardware needed for the installation. Nearly a hundred kits are available; order the model recommended for fitment on your vehicle.
( 851 )
$545.99
—
$677.99
On Sale
Shafer's Classic Reproductions exhaust systems are available for a variety of popular classic vehicles—most in your choice of aluminized or stainless steel tubing. These complete exhaust systems are available as accurate OE replicas, or with a number of high performance options and variations. Shafer's exhaust systems are manufactured to OEM specifications using state-of-the-art CNC equipment. Laser-scanned from original factory components, the data is stored for use by the pipe benders, resulting in correctly bent tubing accurate to within 0.0005 in. for an exact duplicate each time the part is produced. Options for Shafer's Classic Reproductions exhaust systems include (depending on the model): * Fitments for various headers and OE-type manifolds * Tailpipe exits * X-pipes * H-pipes * Glasspack, turbo, chambered, or OE-replacement mufflers
( 51 )
$752.99
—
$849.99
$677.69
—
$764.99
Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible
( 30 )
$664.05
—
$809.40
An aftermarket exhaust system is one of the simplest modifications you can make to your vehicle that will add both power and personality to your ride. Injen Race Series cat-back exhaust systems complement your vehicle's aggressive styling and performance with a straight through, single exit design developed to give you the most exhaust flow out of any cat-back system on the market. The entire length of the system features mandrel-bent, 304 stainless steel 3.00 in. (76mm) pipe with a rear section that tucks into the undercarriage and a single exit, straight-through tip. These features allow turbos to breathe and perform at their peak efficiency, while providing the most ground clearance possible, and the most exhaust flow with a race-inspired, deep exhaust note. Additional features and benefits: * High-quality exhaust band clamps provide the simplest, quickest installation possible * Uses all factory mounting points for simple and convenient placement and compatibility * Oversized tubing reduces restriction providing increased airflow and performance * Increased throttle response and decreased turbo lag * Hand-crafted and TIG-welded to perfection for strength and durability
Not Yet Reviewed
$641.95
aFe Large Bore-HD exhaust systems are constructed from mandrel-bent 409 stainless steel tubing with high-quality band clamps and OE-style bayonet hangers. They use factory mounting locations to provide a quick, hassle-free installation. Also included with many of these diesel systems is a massive wrinkle-black powdercoated or polished 304 stainless steel tip with a laser-cut stainless steel aFe power badge. aFe Large Bore-HD exhaust systems are the perfect combination of performance, fit, and value and feature: * Leak-free 360 degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Large diameter tubing provides maximum flow * Smooth bends for low turbulence, increased horsepower and torque, and lower exhaust gas temperatures (EGTs) * Slash-cut tips with intercooling vents reduce EGTs at the tailpipe (most applications) * Available in DPF-back, cat-back, turbo-back, and downpipe-back configurations (varies by model) * Select systems include dual outlets and exhaust tips Note: Some of these systems are "Race Only" products sold solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 12 )
$523.95
—
$819.00
MagnaFlow Black Series Performance DPF exhaust kits are the company's premier Black DPF Series—featuring 409 stainless steel construction, with the added protection and style of a high-temp satin black coating from tailpipe to tip. These systems are built with mandrel-bent tubing in various intermediate and tailpipe diameters. They're available in styles such as cat-back, particulate filter-back, and turbo-back; as well as muffler style and exhaust type options. The 300 Series stainless steel intercooled tips also have the black coating. Order the model designed for fitment on your specific vehicle.
( 1 )
$564.00
—
$781.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
