Availability
Built for racers and engine builders who craved the performance, Moroso racing vacuum pumps are manufactured from billet aluminum and feature a precision-machined shaft, rotor, and bearings that will withstand the rigors of racing. They work by producing high crankcase vacuum, which increases power by improving ring seal, preventing blowby, and detonation. Allowing the use of lower-tension piston rings for less friction. These positive pumps are much more consistent and effective than header-mounted evacuation systems.
( 5 )
$785.99
—
$802.99
CVR mechanical vacuum pumps can be used on wet or dry sump engines and are designed with precision-sealed roller bearings. They are precision-machined from T-6 6061 aluminum and clear hard-anodized for extended wear. CVR pumps achieve greater vacuum sooner and are maintenance-free. They're also available as a kit with a mounting bracket for small block and big block Chevrolet cylinder heads, or any engine using a motor plate.
( 1 )
$560.99
Summit Racing™ Pro LS forged H-beam connecting rods deliver industry-leading fit, finish, and durability at an affordable price. They're available in different size options, individually or in a set of 8. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Designed for up to 5,000 ft. per minute avg. piston speed in Street and Drag applications * ARP 2000 rod bolts with 200,000 psi tensile strength * Dual ribbing on rod cap for maximum strength * Stroker clearanced--minor cylinder notching may be required * Accommodates most camshafts with 4.250 stroke * Bores finished to +/- .0001 in. * Balanced to within +/- 1 gram per end * Full-floating with precision-honed bronze bushing * Small-end supports the wrist pin with minimal side clearance for maximum shear strength * Each rod is magnetic particle tested to ensure flawlessness * Shot-peened finish to remove potential for stress risers
( 19 )
$699.99
Summit Racing™ link bar hydraulic lifters are drop-in retrofit lifters designed to allow conversion to street hydraulic roller camshafts. These lifter bodies are machined from cold formed steel with clipped axles. They feature .700 in. diameter wheels and are designed for street use up to 6,500 rpm.
( 18 )
$620.99
—
$668.99
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 14 )
$624.99
—
$709.99
The Summit Racing Pro LS forged pistons are affordable and built to withstand the rigors of high boost and nitrous. These pistons are forged from Premium 2618 alloy - the strongest made. They have specially profiled piston skirts, which allow them to run a tight piston-to wall-clearance for maximum ring seal and minimal friction. They have many other high-tech features too! • Maximum ring-land thickness for power-adders • Dedicated forgings for the best strength-to-weight ratio • Multiple compression ratios specifically targeted for 4.8L, 5.3L, 5.7L, and 6.0L engines • Designed around Premium file fit rings with Gas-Nitride or Plasma steel tops and ductile Napier second rings • Available in versions for Gen. 3 Press-fit, Gen. 4 Floating, and Aftermarket 6.125 rods • Standard and Stroker versions available • Generous valve reliefs that work with both Cathedral port AND Rectangle port heads • Pressure-fed pin-oiling • Pressure seal groove in 2nd ring land for increased seal. • High-Speed brush deburring to remove sharp edges that cause detonation • Ultra-Modern 2.250 pin forgings clear the reluctor rings with stroker cranks • Durable Chromium Steel wristpins. • Replacement Singles Available
( 70 )
$622.99
—
$649.99
On Sale
You won't find a better quality cam for your LS-based engine than our Summit Racing™ Pro LS series of cams. These convenient combo kits enable you to get the cam along with the correct matching lifters. Pro LS cam, lifters, and trays are included in one easy-to-order part number. Whether for street/strip, turbocharged, or racing use, you'll find the kit recommended for your year/make and engine application.
( 4 )
$580.10
$531.35
—
$580.10
Summit Racing™ Performance 4340 forged steel connecting rods come in a variety of applications and options. From a light rod street-strip cruiser to a beefy rod for a 1500 hp big block, you will find just the rod for your combination. As always, Summit Racing™ connecting rods are packed with great features at the best prices. Options and features: * Chevy, Ford, Chrysler, and Pontiac * Big and small blocks * Multiple lengths * H-beams and I-beams * Through-bolts to cap-screws * Press-fit to full-floating * Multiple grades of rod bolts from 8740 through L-19
( 38 )
$519.99
—
$799.99
Canton Racing Accusumps are oil reservoirs that connect to the engine's oiling system. They are designed to collect pressurized oil from your engine and store it so that it may be discharged when oil pressure is low. Canton Racing Accusump oil accumulators deliver oil before starting to eliminate dry start scuffing (pre-oiling). They also discharge oil during low oil pressure surges to protect against engine damage during demanding racing conditions.
( 22 )
$796.00
On Sale
Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.
( 74 )
$549.99
Moroso drag/road racing oil pans are made with thick, precision laser-cut steel rails, and feature a 7 quart capacity that moves oil away from your rotating assembly, offering excellent oil control and horsepower savings. The pans' race-proven diamond shape, four trap door assembly, and anti-slosh baffles keep your oil contained in the oil pump pickup area during road and drag racing. Moroso drag/road race oil pans have a billet aluminum adapter with a 1/4 in. NPT sensor port that allows a 13/16th thread Moroso or OEM filter to be mounted in the stock location--no need to run a remote oil filter. These pans use a stock dipstick.
( 40 )
$526.99
—
$622.99
Summit Racing™ Active Fuel Management delete combos are designed to eliminate the cylinder deactivation system on GM Generation IV LS V8 engines. They include the correct hydraulic roller lifter set, a valve lifter guide set, new head bolts, and an engine valley cover. The combos are available with or without the necessary gaskets, pick a combo, add an aftermarket camshaft and you're ready to put that V8 power to the ground!
( 7 )
$617.78
—
$619.78
On Sale
Shutting down your vehicle's fuel-saving cylinder deactivation system has its advantages. If your AFM lifters are failing or if you're doing performance upgrades, Summit Racing™ offers cylinder deactivation delete combo Pro Packs that will allow your vehicle to run on all cylinders and have full power at all times. Select the kit designed for your vehicle. Cylinder deactivation delete Pro Packs include: * ICT Billet LT lifter valley covers * Summit™ Performance LS7 hydraulic lifters * Summit™ lifter guides * BTR Gen V LT VVT cam timing bolts * ACDelco crankshaft front seal * ACDelco water pump gaskets * Mahle head gasket set * Fel-Pro head bolts * ACDelco harmonic balancer bolts
Not Yet Reviewed
$777.89
$774.89
Moroso drag race oil pans are available for hundreds of vehicle-specific applications. The sizes and configurations are built for easy installation and optimum performance. Our selection includes a variety of styles, materials, and fluid capacities for drag racing, street and strip, and road race usage. Order the replacement model designed for your ride.
( 58 )
$590.99
—
$781.99
Summit Racing™ Pro Pack oil pan and pump kits include a new Summit Racing performance oil pan, a matching steel pickup with a performance screen, and a nodular iron high performance oil pump with a pump driveshaft. A cellulose/nitrile rubber Summit Racing™ oil pan gasket and a copper oil pump gasket are also included in these Pro Pack kits.
( 30 )
$522.94
—
$596.94
Briggs & Stratton 206 racing crate engines are factory-sealed long blocks with ground cams and controlled piston pop-up (reducing compression variance). These budget-friendly mills feature a simplified IKF/WKA rule set designed to maintain a stock configuration, right down to the factory-shipped carburetor jets. Simply put: the 206 engines even the playing field so that drivers can focus on the important task at hand--winning the race! Briggs & Stratton 206 crate engine features and specs: * Primary use: Karting, Microstocks, Jr. Drag Racing * Engines are assembled by hand in Milwaukee, WI using tooling and dies specifically designed for racing for unparalleled repeatability * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear * Cam ground, barrel-faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * .255 max. lift ground cam with nitrited lobes and built-in mechanical compression release * High-silicon, racing-engineered valve springs * High-grade stainless steel dished valves with nitrited exhaust * 3-piece, automotive-style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built-in 6,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom grafoil composition head gasket
( 7 )
$759.00
Make your engine rebuild more affordable with Summit Racing™ coated forged pistons! They offer the strength of a forging at a cast piston price. They're forged from 4032 aluminum, an alloy containing silicon—which controls the thermal expansion for tighter piston-to-wall clearances. This unique alloy and design reduces piston wobble, limits noise, improves piston ring seating, and increases the overall life of skirts and pin bores. The special coating on these forged pistons adds extra protection from both skirt scuffing during cold starts or on an overheated engine. These sets are available in dozens of models/options to fit applications from 1967 and up. Summit Racing™ coated forged pistons will meet your engine demands!
( 35 )
$504.99
—
$519.99
Are you looking for a great made-in-the-USA cam for your 5.0L H.O. engine? Summit Racing's™ affordable new line of 303 Plus camshaft and lifter kits are just what you need. The E303 Plus, B303 Plus, and F303 Plus are designed to tune easily and have the idle you're looking for. We've applied the latest lobe technology, and the valve events have been tweaked for modern intake manifolds and cylinder heads. Starting with American bearing steel billets, the cams are precision-machined on a modern CNC grinder with CBN diamond wheels for unmatched quality. The Summit Racing™ 303 Plus camshafts are available in multiple rpm operating ranges, durations, and other performance options.
( 1 )
$509.91
—
$518.68
On Sale
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$773.95
$508.21
—
$773.95
PAC Racing 1300 Series drag race valve springs are designed for engines that can withstand the most demanding performance. They incorporate the latest in heat-treating technology and innovative, dynamic surface-enhancement processes. PAC Racing offers 1300 Series in dual and triple versions.
( 1 )
$559.17
—
$621.30
Our lightweight, CNC-machined aluminum roller rocker arms have premium needle-bearing fulcrums for stable operation, reduced friction and wear, plus increased horsepower. These pedestal-mount rocker arms are an easy upgrade on 1999 and later LS1/LS6 engines and don't require changing valve covers. The rocker arms come with pedestals and have an anodized finish.
( 28 )
$509.99
Summit Racing™ Forged Pro Pistons brings modern engine piston technology to older engine platforms at the great value. Why use an antiquated piston designed fifty years ago in your new build? A great piston starts with a great forging. Forged Pro piston forgings are stronger AND lighter. This makes more power AND takes stress off the crank, rods and block at higher rpm. It also saves money balancing a crank when heavy metal is not required. Forged Pro pistons are designed around ultra-modern Nitride Steel top ring packs and Summit GP Gas Ported variants. Less friction results in more power and less bore wear. Superior machining results in less blowby for less oil consumption and longer life is the result. Better rings are great horsepower per dollar! Most old production engines were designed to run on 87 octane in heavy vehicles. If you're building a performance engine, chances are you're running it on 91+ octane and you might as well add a little pop. Forged Pro pistons yield an extra 1/2 point of compression in most instances. This is free power from idle on up for the life of the engine! Forged Pro pistons have extra thick ring lands for moderate boost and nitrous. Special care has been taken to deburr critical areas for more strength and less chance of detonation. Special skirt profiles are designed to run at tighter clearances than other forged pistons for less piston rock. This helps them make more power, run quieter and last longer than other forged pistons. Make your build run with the best of them!
( 6 )
$617.99
—
$655.99
If you've got an early small block Chevy with a long water pump, Summit Racing™ mid-mount serpentine kits offer a better way to drive your engine accessories. Each system features 3/4 in. thick, CNC-machined 6061-T6 billet aluminum alternator and power steering brackets that bring symmetry and a uniform style to your engine compartment--along with easy installation and simple belt adjustment. The kits also include crank, water pump, alternator and power steering pulleys, all crafted from the same billet aluminum, plus all mounting hardware and both serpentine-style belts. The systems work with a standard-style GM alternator and Saginaw power steering pump (not included). Order the model with options preferred for your application.
( 69 )
$529.99
—
$594.99
Instant Rebate
Sting the competition with the full-body design of Scorpion Race Series roller rocker arms. They're precision-crafted via high-tech manufacturing methods, then fully CNC-machined. These rockers offer more clearance for retainers and springs, and can easily handle .950 in. lift and 950 lbs. of open spring pressure. The surfaces are micro-polished and anodized for looks, protection, and maximum durability. Scorpion rocker arms are available in nearly 200 fitment options; order the set recommended for your application. More speed for your high performance passion! Additional features include: * Aerospace-grade 7000 Series aluminum for maximum strength and durability * Needle bearing fulcrum and roller tip * Precision-ground needle bearings * Centerless ground trunnion, ground pin, and roller * Burr-free trunnion through hole * Directed oiling * Large machined seat and thick-walled adjusting nut (polylock) * Pedestals machined from solid steel * Black oxide coated steel parts * 1.600 in. fulcrum width * Clear 1.625 in. O.D. valve springs
( 212 )
$698.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
