Availability
On Sale
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
$690.80
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 14 )
$624.99
—
$709.99
FLOTEK 276cc LS3 cylinder heads feature as-cast high-flow intake runners that flow significantly better than the stock LS3 heads. The ports are in the stock location, so no special valvetrain parts or rocker arms are required. These heads are 15 degree, which is the same as the stock cylinder heads—no special pistons are required. They will work on any LS block that has a 4 in. bore or larger. FLOTEK 276cc LS3 cylinder heads combine high performance and high quality at a value price. Select from bare or assembled models.
( 2 )
$539.00
—
$774.00
To make the most power from your engine, you need to optimize the air ingested and captured by avoiding valves closing too soon or too late. COMP Cams 4-pattern hydraulic roller camshafts are the first series of cams designed to accommodate a difference in runner length and avoid valves closing at the wrong times. Any conventional center-layout single throttle body or carbureted V8 intake manifold features longer outboard runners and shorter inboard runners, meaning that each valve event should occur at a different moment. COMP Cams has designed a series of cams that optimizes valve events and features a large increase in both area under the curve and stability at high rpm. They feature four different lobe patterns with one intake and exhaust design for outboard runners and another intake and exhaust design for the inboard runners. While the four central cylinders are all the same grinds, the outboard exhaust openings are two degrees earlier, with outboard intake closings coming two degrees later. NASCAR has been utilizing this technology for years. COMP Cams is now applying this same knowledge in street vehicles to balance air/fuel ratio per cylinder. These cams are CNC-ground from steel billet cores. They feature cast iron distributor gears and utilize a series of lobes with over .600 in. valve lift and stability up to 7,500 rpm, all while providing more consistent cylinder to cylinder torque. They also feature tight lobe separation for both excellent power and a throaty sound. Designed for small block Chevy, big block Chevy, and small block Ford carbureted or fuel injected applications, the design is exclusive and unique to COMP Cams.
( 4 )
$649.95
ATK offers select parts for your build, including cylinder heads. They use them in their engine combinations and are available to complete your small block Ford engine or upgrade existing components. ATK High Performance 205cc SBF aluminum cylinder head features: * A356 aluminum construction * Stainless steel intake and exhaust valves * Manganese Bronze valve guides * Viton® valve seal * Powder meatal valve seats * Steel retainers with 7-degree bead lock keepers * Spark plug dimensions: 14mm x .750 in. with gasket seat * Head bolt diameter: 1/2 in.
Not Yet Reviewed
$698.99
Racers who use the latest cylinder heads or want a unique look for their engines—or both—can now find quality, lightweight aluminum valve covers at an affordable price. These Moroso fabricated aluminum valve covers have thick billet rails for superior gasket sealing and resistance to warping. They mount through tubes welded directly to the valve covers—to help maintain gasket-rail flatness and prevent leaks. The covers feature a tall design that will clear all rocker combinations, as well as stud girdles. Some models have built-in oilers to keep valve springs cooler in oval track racing. Order the model designed for your vehicle and engine application.
( 27 )
$561.99
—
$673.99
These Severe Duty Gen II custom valves with unmatched strength and superiority are the only valves of their kind. Exhaust material XH-428 and intake material NK-844 are paired together for ultimate dominance over all others. With four times the tensile strength of competitors' intake valves and supremely better fatigue life, Manley Severe Duty Gen II custom valves truly show their commitment to seeing that you're there at the finish. You decide the head diameter and seat and margin widths, as well as valve length, groove type, and location for the perfect custom setup!
Not Yet Reviewed
$525.56
—
$666.85
Do you have a boosted, high-heat, high-horsepower engine? Manley offers custom race valves for your high performance engine. These Race Series Gen II custom valves are manufactured from XH-426 (exhaust) and NK-842 (intake) materials with hard tips and hardened grooves. They are tailored to length, groove position, head diameter, margin, and other specifications that you request when ordering. So, whether you're building an engine or are a serious racer, Manley is committed to seeing that you're there at the finish.
Not Yet Reviewed
$525.56
—
$536.31
ATK offers select parts for your build, including cylinder heads. They use them in their engine combinations and are available to complete your small block Ford engine or upgrade existing components. ATK High Performance 185cc SBF aluminum cylinder head features: * A356 aluminum construction * Stainless steel intake and exhaust valves * Manganese Bronze valve guides * Viton® valve seal * Powder meatal valve seats * Steel retainers with 7-degree bead lock keepers * Spark plug dimensions: 14mm x .750 in. with gasket seat * Head bolt diameter: 1/2 in.
Not Yet Reviewed
$648.99
You can rely on Howards Cams RaceMax lifters. These vertical bar mechanical roller lifters feature heat-treated 8620 steel billet bodies that are CNC-machined in one process to assure accuracy of all part features. RaceMax lifters are precision ground for proper fit in OE and +.300 in. tall aftermarket lifter bores. They're outfitted with an increased oil ban diameter for maximum rigidity, as well as heat-treated tool steel nitrided axles, and precision fitted roller bearings. The pressure-fed axle oiling insures longevity and best defense against premature failure. Trust your race car performance to Howards Cams RaceMax vertical bar mechanical roller lifters.
( 4 )
$739.99
AFR Inconel valves provide your cylinder head with the proper flow needed to keep your engine running efficiently. Inconel alloys are oxidation/corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. Order the AFR Inconel valves designed to fit your application.
Not Yet Reviewed
$511.35
URO Parts variable valve timing sprocket kits are direct-fit OE replacements to restore factory VVT sprocket function, allowing increased performance without sacrificing fuel economy. URO sprockets are manufactured using high-quality materials to withstand engine heat, and they are designed and tested for reliability as well as long life.
Not Yet Reviewed
$644.99
Pro-Filer small block Chevy All American cylinder heads have a 23 degree valve angle, providing bolt-on compatibility for stock accessories. They're designed for all-around racing and are offered with 185cc, 195cc, 210cc, 235cc intake ports; 64cc, 68cc, 70cc, or 72cc chambers; and straight or angled spark plug locations. You can order the heads assembled or unassembled for engine builders. End pads are drilled and tapped for accessories, and bronze guides are included to reduce stem wear. Nearly 200 models are available; order the heads with options recommended for your application. Whether you're running on the street, strip, or track, equip your ride with Pro-Filer small block Chevy All American cylinder heads. Additional features: * Revised spark plug location to improve flame travel * Uses gasketed 3/4 in. reach plugs like NGK R5671-7 Series
( 4 )
$775.00
—
$798.00
These Xtreme XR camshafts from COMP Cams are developed using exclusive Xtreme Energy lobe designs to achieve the ultimate in performance for your engine. Specifically designed for three different rpm ranges, these cams are made to insure the most complete component matched performance and drivability. They are made to work with stock valve train components, making for a simple drop-in installation, and like all COMP Cams, are manufactured to the strictest tolerances.
Not Yet Reviewed
$742.95
Ford Performance parts engine rebuild kits are designed specifically for your make/engine. Overtime your engine will lose power and not be as efficient as it was brand new. The best way to gain back that power is with a Ford Performance parts engine rebuild kit. These kits utilize high-quality materials for long-life performance and quality.
Not Yet Reviewed
$599.99
Mopar Replacement rocker arms offer an original equipment fit. That means their fitment and install will be hassle-free. These genuine OE Mopar parts will help to keep your vehicle's engine running its best. Select the Mopar Replacement rocker arms designed for fitment for your vehicle application.
( 18 )
$762.99
Kibblewhite is dedicated to providing the best lightweight racing valve spring kits available. The folks at Kibblewhite have years of experience building the finest valvetrain products, and that experience has culminated in these lightweight valve springs. Each spring starts life as the finest quality super-clean, chrome-silicon wire that is wound to the most exacting standards. After the spring is wound, it goes through a rigidly controlled heat treatment, stress relief, and shot-peening process that ensures the longest lasting and strongest springs possible. These springs are perfect for today's high-revving motors, whether you are on the race track or the trail. Upgrade to these Kibblewhite lightweight racing valve spring kits today and stop worrying about when one of your stock springs is going to fail you.
Not Yet Reviewed
$859.21
On Sale
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 2 )
$780.15
$562.80
—
$702.14
COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 212 )
$522.95
—
$776.95
On Sale
AFR 200cc SBC Enforcer Cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 350 to 400 cu. in. operating below 6,000 rpm. They come fully assembled with the identical components found in their higher end CNC-ported cylinder heads, such as ARP rockers studs, Melling Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks, hardened spring cups and ductile iron seats, and their one-piece 8mm 21 4N stainless steel valves. The AFR 200cc SBC Enforcer cylinder heads are available in straight or angle plug, assembled or bare.
( 2 )
$789.60
$710.64
Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.
( 184 )
$500.95
—
$857.95
Briggs & Stratton 206 racing crate engines are factory-sealed long blocks with ground cams and controlled piston pop-up (reducing compression variance). These budget-friendly mills feature a simplified IKF/WKA rule set designed to maintain a stock configuration, right down to the factory-shipped carburetor jets. Simply put: the 206 engines even the playing field so that drivers can focus on the important task at hand--winning the race! Briggs & Stratton 206 crate engine features and specs: * Primary use: Karting, Microstocks, Jr. Drag Racing * Engines are assembled by hand in Milwaukee, WI using tooling and dies specifically designed for racing for unparalleled repeatability * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear * Cam ground, barrel-faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * .255 max. lift ground cam with nitrited lobes and built-in mechanical compression release * High-silicon, racing-engineered valve springs * High-grade stainless steel dished valves with nitrited exhaust * 3-piece, automotive-style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built-in 6,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom grafoil composition head gasket
( 7 )
$759.00
ATK high performance LS3/L92 25cc as cast aluminum cylinder heads are the perfect budget option for your next LS build. These fully assembled heads are capable of making over 600 hp naturally aspirated out of the box and will come loaded with upgraded components. The springs are set up to be used on up to .650 in. lift camshafts. No reason to swap parts on your new heads when running an upgraded cam! -- Features and benefits: * Bronze valve guides * Dual valve springs for .650 in. max lift * CNC-finished faces and bolt holes for extreme accuracy * 355-T6 high density aluminum * Machined for screw in studs and guide plates * All factory components will fit without modification -- Cylinder Head Specifications INTAKE: * Intake Runner Volume (cc): 252 * Intake Port Location: Standard * Intake Valves Included: Yes * Intake Valve Diameter (in): 2.160 in. EXHAUST: * Runner Volume (cc): 78.8 * Exhaust Valve Diameter (in): 1.600 in. * Exhaust Valves Included: Yes * Exhaust Runner: No * Port Shape: Round * Exhaust Port Location: Standard COMBUSTION CHAMBER: * Combustion Chamber Volume (cc): 69.4 * CNC-Machined Combustion Chamber: No VALVE SPECS: * Intake Valve Angle: 12 degrees (3 degrees rolled) * Exhaust Valve Angle: 12 degrees (3 degrees rolled) * Valve Guides Included: Yes * Valve Guide Material: Manganese Bronze * Valve Seats Machined: Yes * Valve Seat Machine Style: 5-Angle * Valve Seat Material: Chrome Nickle * Valve Stem Seals Included: Yes * Valve Stem Seal Style: Viton® Fluoroelastomer SPRINGS: * Valve Springs Included: Yes * Maximum Valve Lift (in): .650 in. * Spring Pressure Open: 370 @ 1.150 * Spring Pressure Closed: 142 @ 1.800 * Outside Diameter of Outer Spring (in): 1.29 in. * Damper Spring Included: Yes * Number of Springs per Valve: Dual * Retainers Included: Yes * Retainer Material: Chromoly Steel * Locks Included: Yes * Lock Style: 7 Degree ROCKER ARMS: * Rocker Arm Studs Included: No * Rocker Arms Included: N/A * Rocker Arm Nut Thread Size (in): 8 x 1.25 * Rocker Arm Nuts Included: No MISC: * Head Style: Assembled * Cylinder Head Material: Aluminum * Cylinder Head Finish: Natural * Spark Plug Style: Standard * Cover Mounting Style: Standard * Steam Holes Drilled: No * Oiling Style: Through Pushrod * Machined for O-Ring: No * Heat Crossover: No * 10mm Accessory Bolt Holes Machined On Ends of Heads
Not Yet Reviewed
$748.99
On Sale
COMP Cams has awakened the muscle car sound--and it is nastier than ever! Thumpr Series camshafts is a line of cutting-edge hydraulic roller camshafts for engines originally equipped with flat tappet cams. With them, you can expect a substantial power increase without sacrificing reliability or ease of maintenance! The lobe profile and grind characteristics of Thumpr cams include blending an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. This maximizes rough-idling tendencies, delivering a seriously aggressive exhaust note without affecting engine power output. Thumpr camshafts are available in a variety of grind profiles, each producing impressive horsepower and torque performance within a different rpm range.
( 17 )
$549.95
—
$739.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
