Availability
Showing In Stock Items. Show All 38 Items.
The Summit Racing Pro LS forged pistons are affordable and built to withstand the rigors of high boost and nitrous. These pistons are forged from Premium 2618 alloy - the strongest made. They have specially profiled piston skirts, which allow them to run a tight piston-to wall-clearance for maximum ring seal and minimal friction. They have many other high-tech features too! • Maximum ring-land thickness for power-adders • Dedicated forgings for the best strength-to-weight ratio • Multiple compression ratios specifically targeted for 4.8L, 5.3L, 5.7L, and 6.0L engines • Designed around Premium file fit rings with Gas-Nitride or Plasma steel tops and ductile Napier second rings • Available in versions for Gen. 3 Press-fit, Gen. 4 Floating, and Aftermarket 6.125 rods • Standard and Stroker versions available • Generous valve reliefs that work with both Cathedral port AND Rectangle port heads • Pressure-fed pin-oiling • Pressure seal groove in 2nd ring land for increased seal. • High-Speed brush deburring to remove sharp edges that cause detonation • Ultra-Modern 2.250 pin forgings clear the reluctor rings with stroker cranks • Durable Chromium Steel wristpins. • Replacement Singles Available
( 70 )
$622.99
—
$649.99
Summit Racing™ Forged Pro Pistons brings modern engine piston technology to older engine platforms at the great value. Why use an antiquated piston designed fifty years ago in your new build? A great piston starts with a great forging. Forged Pro piston forgings are stronger AND lighter. This makes more power AND takes stress off the crank, rods and block at higher rpm. It also saves money balancing a crank when heavy metal is not required. Forged Pro pistons are designed around ultra-modern Nitride Steel top ring packs and Summit GP Gas Ported variants. Less friction results in more power and less bore wear. Superior machining results in less blowby for less oil consumption and longer life is the result. Better rings are great horsepower per dollar! Most old production engines were designed to run on 87 octane in heavy vehicles. If you're building a performance engine, chances are you're running it on 91+ octane and you might as well add a little pop. Forged Pro pistons yield an extra 1/2 point of compression in most instances. This is free power from idle on up for the life of the engine! Forged Pro pistons have extra thick ring lands for moderate boost and nitrous. Special care has been taken to deburr critical areas for more strength and less chance of detonation. Special skirt profiles are designed to run at tighter clearances than other forged pistons for less piston rock. This helps them make more power, run quieter and last longer than other forged pistons. Make your build run with the best of them!
( 6 )
$617.99
—
$655.99
D.S.S. Racing SX-Series forged pistons and rings are the perfect find in your hunt for horsepower! Why? They're high-quality, lighter than stock, and value-priced! D.S.S. SX forged piston and ring kits offer value-minded racers the high performance build they want on a budget. They provide high-caliber features like premium aluminum alloy, forced pin oiling, drilled return holes, a turned dish design, and CNC diamond turned skirts that you will not normally have in pistons of this price. These SX forged pistons and rings are more than capable of getting your engine blower, turbo, and nitrous ready! Kit includes a DSS DM piston ring set featuring ductile moly steel top rings and flex vent oil rings. Your quest for horsepower includes quality and value--choose D.S.S. Racing SX-Series forged pistons and rings.
( 4 )
$714.95
—
$754.95
On Sale
RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts
( 1 )
$689.00
—
$837.00
$620.10
—
$753.30
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series forged 4032 alloy pistons increase your horsepower potential without busting the budget. Forged and machined with premium aircraft quality 4032 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application needs. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High strength piston wrist pins * Deep CNC valve reliefs
( 9 )
$599.95
—
$719.95
If you're pushing the envelope on your engine combination or need parts that will stand up to the demands of today's power levels, D.S.S. FX-Series forged 2618 alloy pistons will increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. The FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application. Key features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$629.95
—
$749.95
D.S.S. Racing SX-Series forged pistons are the perfect find in your hunt for horsepower! Why? They're American-made, high-quality, lighter than stock, and value-priced! D.S.S. SX forged pistons offer value-minded racers the high performance build they want on a budget. They provide high-caliber features like premium aluminum alloy, forced pin oiling, drilled return holes, a turned dish design, and CNC diamond turned skirts that you will not normally have in pistons of this price. These SX forged pistons are more than capable of getting your engine blower, turbo, and nitrous ready! Your quest for horsepower includes quality and value--choose D.S.S. Racing SX-Series forged pistons.
( 8 )
$559.95
—
$599.95
Total Seal MS AP Advanced Profiling ring sets feature gapless top rings, conventional second rings, and standard-tension oil rings. Total Seal MS AP Advanced Profiling ring sets are ideal for street, race, mild nitrous, and mild forced induction applications.
( 6 )
$519.87
—
$530.57
D.S.S. Competition Engine offers E Series forged piston and ring kits for a variety of applications, including many Chevy and Ford V8 small block engines from 1963 and up—an ideal choice for a budget performance engine build. Forged and machined from premium wear-resistant 4032 alloy, these pistons are the low-cost alternative to cast hypereutectic pistons. They're loaded with features, such as: fully CNC-machined piston tops; forged in oil drain backs; diamond turned skirts; full floating or press-fit heavy-duty wrist pins; double true arc pin retaining locks; and more. Available with flat top or dish style pistons, in a wide range of size and stroke options, the kits are sold in sets of 8. Additional details: * Ring set included * Fully machined piston crown * Lightweight design * Precision-honed pin bores * Forged side reliefs * Boost and NOS ready (mild levels)
( 2 )
$509.95
Clearance
ICON FHR Series piston and ring sets for GM LS offer premium, custom options in an "off the shelf" option for your LS-family engine. FHR (Formed Head Relief) pistons have valve reliefs that are formed in as the piston blank is pressed into the die, creating a stock, but light forging. Many of the domed models are solid which allows tailoring the dome height for a specific compression ratio. They are constructed from high-strength, forged 4032 aluminum alloy for increased durability while maintaining tighter piston-to-wall clearance for increased cylinder sealing, lower cylinder wear, and stock-like noise levels, making them ideal for street and lightly boosted applications. Completing these kits are file-fit ring sets that allow custom ring gaps for your specific application, and they are built to handle the abuse of stock street or forced induction to nitrous applications. ICON FHR Series pistons for GM LS also feature: * Mini grooves allow an overheated piston that contacts a cylinder wall to transfer heat to the wall. Friction is also reduced over a solid ringland. * Accumulator grooves provide a reservoir area for gases that pass by the top ring. Pressure is reduced between top and second ring to help stabilize flutter and maximize ring seal. * 0.030 in. offset wrist pins * Round wire locks * M42 skirt coating
( 1 )
$517.99
Are people not looking twice at your sport compact? Give them more than a little surprise by installing a set of Wiseco sport compact pistons. These pistons are forged from either 4032 or 2168 aluminum alloy and are precisely CNC-machined to their final configuration. Where appropriate, designs incorporate the strength to deal with nitrous, turbos, or blowers. Chromoly wrist pins and Spirolox retainers are included. Order the size designed for fitment on your vehicle.
Not Yet Reviewed
$613.99
—
$816.99
Wiseco sport compact piston and ring kits give you stronger pistons and tighter tolerances than any other part in your engine, with less internal and external machining. Wiseco's advanced forging process and extensive heat-treating and finishing processes ensure the performance and reliability that you demand from your engine. These kits' crown thickness and ring lands are designed for power-adders like turbos and blowers and nitrous oxide. They come complete with high-quality piston rings. Whether you're on or off of the street, you can depend on the maximum strength and minimum variance of Wiseco's aluminum-forged pistons for your sport compact vehicle. Choose the kit recommended for your make and engine application.
( 5 )
$586.99
—
$816.99
On Sale
JE Pistons sport compact pistons are specifically engineered for extreme applications, up to and including professional competition. In this environment, the higher compression ratios, highest boost, or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Their dome/dish requires no deburring or preparation and features smooth-flowing radii for excellent flame travel. A pin fitting, wire locks, and rings are included.
Not Yet Reviewed
$849.99
—
$899.99
$764.99
—
$809.99
Total Seal's AP steel gapless 2nd piston ring sets feature their Advanced Profiling (AP) 440B stainless steel top ring with C33 chromium nitride face coating that doesn't allow dirt to penetrate. It is combined with a cast gapless 2nd ring, and a low, standard, or high-tension oil ring. The sets work in all applications including extreme nitrous, boost, turbo, and forced induction. With Advanced Profiling rings, you get the same horsepower producing piston ring technology that Total Seal delivers to the top builders in Cup, IRL, NHRA, IHRA and Formula 1. Order the ring set for your application.
Not Yet Reviewed
$530.57
Total Seal TS AP Advanced Profiling ring sets feature steel top rings, gapless second rings, and standard-tension oil rings. Total Seal TS AP Advanced Profiling ring sets are ideal for street, race, mild nitrous, and mild forced induction applications.
Not Yet Reviewed
$500.52
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$804.95
D.S.S. Competition Engine offers FX-Series forged 4032 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 4032 alloy pistons increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft-quality 4032 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 4 )
$774.95
—
$804.95
Mahle Original individual Fire-Power piston rings are engineered to withstand the punishment of today's high-powered, nitrous oxide-injected, turbocharged and supercharged race applications. PC479 compression rings will provide superior ring durability, stable radial tension, superior combustion sealing and oil control, while protecting the cylinder walls.
Not Yet Reviewed
$599.99
Wiseco Professional Series pistons are designed to take the hard-driving abuse from your performance engine. They're forged from either 2168 or 4032 aluminum alloy for maximum strength, and then precision CNC-machined to their intricate final configurations under close tolerances. Where applicable, designs incorporate strength provisions to deal with turbocharging, supercharging, and nitrous. Chromoly wrist pins and Spirolox retainers are included. Choose the model tailored for your engine application.
( 9 )
$806.99
On Sale
Manley offers AP Premium piston rings from Total Seal to complement their line of Platinum pistons. These AP Premium steel top ring sets deliver superior sealing and maximum horsepower. They incorporate Total Seal's unique and proprietary Advanced Profiling manufacturing, making them ideal for high-horsepower and forced induction/nitrous applications. Order the Manley Total Seal AP Premium piston rings in the application you need.
Not Yet Reviewed
$561.81
$533.72
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? DSS FX Series piston and ring kits increase your horsepower potential without killing the budget. Forged and machined with your choice of premium aircraft quality 4032 or 2618 alloy, these kits are a great choice for naturally aspirated, nitrous, or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. Kit includes a DSS XP piston ring set featuring gas nitrided steel top rings, Napier second rings, and flex vent oil rings. FX Series pistons feature the patented X Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$754.95
JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for European, import, and sport compact applications, and they have been performance-proven in victory lane time and time again. JE Pistons Subaru EJ Series pistons are single replacements. Available in different bore sizes for right or left, the pistons are specifically engineered for extreme applications up to, and including, professional competition. In such environments, the higher compression ratios and boost necessitate the high-tensile strength of forged 2618 aluminum construction. The skirts feature a proprietary Forged Side Relief (FSR) forging design that minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin. High-quality wrist pins, locks, and piston rings are included. Equip your engine with the best in forged pistons—JE Pistons.
Not Yet Reviewed
$517.49
Clearance
Ross Racing pistons are forged from 2618-T61 aluminum alloy and come standard with a ton of great features. All pistons are balanced to +/- 2.5 grams and come with aircraft-quality pins. These Ross Racing forged piston and ring kits include: * Ross Racing rings * Forced piston-pin oilers * Double Spirolox pin retainers * Valve pockets engineered for oversize valves and modern high-lift cams * Fully CNC-machined skirts to deal with high heat and side loadings * Radiused domes (on most applications)
( 1 )
$559.99
$500.50
Clearance
Ross Racing pistons are forged from 2618-T61 aluminum alloy and come standard with many great features, including: * Forced piston-pin oilers * Double Spirolox pin retainers * Valve pockets engineered for oversized valves and modern high-lift cams * Fully CNC-machined skirts to deal with high heat and side loadings * Radiused domes (on most applications) * Balanced to +/- 2.5 grams * Aircraft-quality pins Hundreds of models are available, with bore, stroke, rod length, and piston style options to best suit your replacement or upgrade needs. Order the set compatible with your vehicle and engine application.
( 25 )
$789.99
—
$904.99
$595.50
—
$710.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
