Availability
Unity Automotive complete strut assemblies include all the components required for a strut replacement in a single, fully-assembled unit. All the parts feature OE design, and they're pre-assembled—a breakthrough that saves on installation time by eliminating the safety hazards associated with coil spring decompression. Every assembly features application-engineered valves to optimize each vehicle's unique ride and handling characteristics. Exceed your original equipment standards with the Unity Automotive complete strut assembly designed to fit your application.
( 49 )
$501.99
Classic Performance tubular control arms are designed to add up to five degrees of caster in certain applications, while providing full wheel travel. They're manufactured from 1.250 in., 0.120 in. thick wall DOM tubing, with pivot barrels made from 1.500 in., 0.188 in. thick wall DOM tubing to help eliminate distortion. These control arms use bushings made from self-lubricating, non-squeak patented material that will outlast any rubber or polyurethane bushing. The control arms are designed as bolt-in replacements for your factory originals. Classic Performance tubular control arms will tighten up your front suspension and give you that performance ride through the corners and on straight roads. Select the model and options recommended for your vehicle.
( 125 )
$524.99
—
$634.99
BMR Suspension tunnel mounted torque arms improve handling, reduce wheel hop, and add strength plus adjustability to your 4th Gen GM F-body. These packages mount the torque arm to the transmission tunnel mount instead of the transmission tail shaft, making them ideal for high-horsepower applications. The tunnel mount design removes the load from the transmission, which can damage the transmission, and puts the heavy loads of high-power cars into the chassis. The torque arm crossmember provides an adjustable mounting plate for the torque arm, while adding strength to the floor by reinforcing the transmission tunnel. Features: * Heavy-duty 1.25 in., 0.120 in. wall DOM steel tubing * Heavy-duty 1/4 in. laser-cut, CNC-formed steel plate * MIG-welded * Five mounting positions for instant center and pinion angle adjustability * Integrated driveshaft safety loop (TA011/TA012) * Increased clearance for long-tube headers/aftermarket exhaust (TA012/TA014) * Mounts to the driveshaft tunnel brace * Uses factory differential mount * CNC-machined, on-car torque arm adjuster for pinion angle * 95-durometer polyurethane front mount * Massive increase in strength over factory torque arm * Available in black hammertone or red powdercoat
( 10 )
$529.95
—
$559.95
UMI Performance 1993-2002 GM F-body road race front lower A-arms kits will provide a rock-solid foundation for your road race, autocross, or corner carving 4th Gen. The front lower A-arms fully gusseted box tubing construction, while appearing robust, affords a five pound weight savings per set over factory lower A-arms. The tube adapters for mounting rod ends are crafted from 4140 CrMo steel to enhance thread durability and guarantee years of trouble-free use. These A-arms have double shear sway bar mount tabs with end link set and are designed to work with factory K-members, UMI K-members, and most aftermarket K-members. Product features: * Construction 0.120 in. wall mild steel box tubing * Available in durable red or black powdercoat finishes * 1/2 in. diameter x 1 1/4 in. width racing coilover mount * 5 lbs. lighter than factory A-arms * Double shear sway bar mount with end link set included * Pedestal mount fits DeCarbon, Koni, Bilstein and aftermarket GM T-bars * Nominal 2 degree caster increase potential * Double gusset design for flex-free operation * TIG-welded 4140 CrMo threaded tube adapters * Premium ball joints installed * Race quality high misalignment rod end on vertical mount * CNC machined ball joint cups, tubing radiuses and mounting plates * Lower A-arms use OEM hardware or UMI hardware kit that includes Grade 10.9 bolts, washers, and lock nuts
Not Yet Reviewed
$749.99
Tin Man Fabrication traction bars help keep your wheels on the ground for better traction. They control rear-end torque and stabilize suspension, particularly on race cars and 4WD vehicles. The center link is knurled and notched for hand or wrench adjustments, and the bars can be adjusted for minor pinion angle changes, as well as preloading the suspension for better traction. Tin Man Fabrication traction bars are now available to purchase in five different ways, priced accordingly: * For vehicles with no subframe connectors installed * For use with (previously purchased) Tin Man original subframe connectors * For use with Tin Man Gen II subframe connectors * Kit which includes Gen II subframe connectors and traction bars * Deluxe kit with Gen II subframe connectors, driveshaft loop, and traction bars
Not Yet Reviewed
$568.99
—
$628.99
UMI Performance 1993-2002 GM F-body road race competition front lower A-arm kits provide a rock-solid foundation for your autocross, road race or corner carving 4th Gen. These heavy-duty boxed lower A-arms have dual rod ends and are fully gusseted box tubing construction that combines strength with a five pound weight savings per set over factory lower A-arms. Shock mounting is a double shear with a 1/2 in. dia. x 1 1/4 in. width racing coilover mount—suitable for most racing coilover systems. Revised ball joint location adds a nominal 2 degrees caster increase. These arms have double shear sway bar mount tabs with end link set included and are designed to work with the factory K-member, UMI K-members, and virtually all aftermarket K-members. Whether it's at the race track or for an added improvement to your daily driver, UMI Performance has A-arm kits designed to outperform the stock setup. Product features: * Construction 0.120 in. wall mild steel box tubing * Available in durable red or black powdercoat finishes * 1/2 in. diameter x 1 1/4 in. width racing coilover mount * 5 lbs. lighter than factory A-arms * Double shear sway bar mount with end link set included * Nominal 2 degree caster increase potential * Double gusset design for flex-free operation * TIG-welded 4140 CrMo threaded tube adapters * Premium ball joints installed * Race quality high misalignment rod end on vertical mount * CNC machined ball joint cups, tubing radiuses and mounting plates * Uses OEM hardware or UMI hardware kit that includes Grade 10.9 bolts, washers, and lock nuts Note: Not for use with T-bar lower. Requires 1/2 in. diameter racing lower with bearing only.
Not Yet Reviewed
$749.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
