Availability
Showing In Stock Items. Show All 27 Items.
Steeda "Stop the Hop" Street Starter kits help you eliminate wheel hop and stay within your budget. These kits contain the best three components to rid your Mustang of this menace, provide the fundamental foundation for ultimate traction and suspension compliance, and address the issues with factory IRS subframe mounting. Want to "Stop the Hop"? Get a Steeda Street Starter kit. Kit components: * IRS subframe alignment dowel kit -- Fills the factory bolt hole voids with CNC-machined Delrin® inserts that will square up the rear subframe to the chassis and limit side-to-side and front-to-back movement of the subframe that is present under hard acceleration and braking. * IRS subframe bushing support system -- Patented 8-piece kit designed and made in-house from billet 6061 aluminum and features stainless steel hardware. Fills all the factory voids in the IRS subframe mounting locations, preventing up-and-down movements of the subframe. * IRS subframe support braces -- Made in-house from chromoly steel, these 5-point braces with a simple bolt-in design support the factory subframe by directly tying it into the chassis at key mounting locations, utilizing factory mounting locations on the factory frame. They support the front factory mount and the lower control arm mount as well. Kit benefits: * Eliminate wheel hop while not increasing NVH * Eliminate subframe movement * Simple installation * Squares subframe to the chassis * No permanent modifications
Not Yet Reviewed
$599.95
One of the most effective ways to improve the stiffness and handling of your vehicle is to box the factory chassis. Hellwig Frame FX kits makes it easy for you. Rather than taking considerable time with measuring, cutting, and fitting steel panels these kits simplify the process effectively. Some vehicles have an open C-channel chassis that's only 3 in. wide at the top and bottom. This design is inherently weak in handling torsion and marginal in bending. Frame FX kits double the width of the tension side of the frame rail and close the area for dramatic increases in torsional and bending stiffness. They're comprised of 14 pre-cut 10-gauge steel panels matching the thickness of the factory frame--and fit into the weak points of the factory chassis. Hellwig engineered another panel that adds an extra mount to tie the floor to the chassis, furnishing even more strength to the entire car. In addition, brackets are provided to mount the transmission crossmember, with enough adjustment to accommodate nearly any drivetrain configuration. The increased strength via Hellwig Frame FX kits results in improved handling and ride quality, while retaining the factory chassis and mounting points.
( 20 )
$666.99
—
$689.99
Auto Metal Direct makes heavy-gauge steel rails designed to fit perfect and weld-in easily since they are superior reproductions of the factory original. Frame rails can become weakened by rust, attempts at pushing or towing, or damaged due to an accident, which can adversely affect other chassis components and make your vehicle unsafe to drive. Don't compromise your vehicle—or safety—with cheap replacement parts. For quality parts and components that you need for your classic vehicle, trust the pros at AMD.
( 3 )
$582.99
—
$593.99
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 17 )
$656.99
—
$729.99
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 25 )
$519.95
—
$719.95
The 1967-69 F-body was designed in an era when high performance driving and modern tire technology weren't as prevalent. Their unibody chassis, while innovative at the time, can flex and twist under stress, particularly when cornering aggressively or accelerating hard. QA1's bolt-on subframe connectors offer a simple and effective solution to this common issue. They tackle the flex issue by increasing frame rigidity, leading to a significant improvement in handling performance—especially during cornering, acceleration, and braking. The tubular design connects the front Camaro/Firebird subframe to the rear subframe, providing additional structural support and stiffness to the chassis. Additional details: * Included solid body mounts and hardware further reduce chassis flex. Their aluminum construction offers a noise-free alternative to polyurethane. * Thoughtful design: The QA1 subframe connector contours to follow the body lines for a factory-like look without sacrificing ground clearance. * Easy bolt-in installation makes the upgrade hassle-free. * Fitment notes: Does not fit convertibles.
( 1 )
$535.95
—
$589.95
Replace your heavy stock K-member with one of these tubular QA1 Mustang K-members and, in addition to the weight savings, you'll get better steering geometry, less bump steer, reduced dive under braking, and quicker straight-line performance. Ideal for street performance, autocross, pro touring or drag racing, they easily bolt onto factory components without any wheel or tire fitment changes. Features and benefits include: * All mounting points are digitally-indexed from new factory K-members * Made from high-quality, American-made, high-strength, low-alloy steel (HSLA) steel * Weighs only 25 lbs.--over 50 percent lighter than stock K-members * Increased header and oil pan clearance for easier maintenance and installation * Modular design for versatility--bolt-in engine mounts can easily be swapped for future engine changes * Improved geometry--maintains optimum anti-dive and minimizes bump steer with selectable rack height and optimal control arm positioning * Ideal for Mustangs with a lowered stance * Retain the factory wheel base Note: For best results, QA1 control arms are strongly recommended
( 31 )
$593.95
Complete OE-style chassis fastener kits that contain most everything needed for your vehicle in one package. Summit Racing™ restoration chassis fastener kits aren't hardware store bolts. Each fastener is a reproduction of what was used at the factory, including size, finish and head markings. Each kit component list will vary per vehicle, but all kits provide the correct OEM-style replacements to secure a variety of components from control arms and shocks to steering linkage and transmission crossmember. Select the chassis fastener kit packaged for your vehicle.
Not Yet Reviewed
$504.99
—
$529.99
QA1's tubular K-member for the 1982-1992 Chevrolet Camaro/Pontiac Firebird (F-body) is a significant front-end upgrade. Designed for reduced weight and increased clearance for headers and oil pans, QA1's K-members make a great upgrade for both street performance and track vehicles. QA1's engineers prioritized superior strength when designing these K-member components which reinforces the front-end unibody structure while optimizing weight savings. Unlike other K-members that lock you into a single setup, QA1 K-members offer unmatched versatility with their modular engine mounts (sold separately) that let you switch between engines and transmissions without needing a new K-member. No other K-member offers this level of adaptability, making QA1 the ultimate choice for a seamless build. The K-members offer the flexibility to be used with either coilover struts or QA1 spring sliders, depending on your performance goals. Coilover struts, like QA1's adjustable Proma Star Struts, can also provide a significant performance boost for your 3rd Gen Camaro or Firebird with the ability dial-in the perfect ride height. For those looking to achieve the perfect stance with greater negative camber, while accommodating wider wheels and tires, inboard spring sliders by QA1 are another great option. The inboard spring slider option also helps to maintain spring loads near the factory position on the QA1 K-member. Features and benefits: * Steel suspension subframe crossmember * High-strength design with powdercoat finish * The unique design of QA1's K-members allows the use of interchangeable engine mounts (sold separately) for easy engine swaps—choose from modular engine mounts (sold separately) that either allow you to reuse your existing small block engine and transmission combination or swap to a big block Chevy, or more modern LS and Gen V LT * Substantial weight savings—shedding 32 lbs. while increasing clearance and enhancing accessibility to the front of your car, this is an ideal upgrade! * Compatible with QA1' spring sliders or QA1's coilover struts (sold separately) * You can make your driveline swap even easier by using QA1's transmission crossmembers and torque arms (both sold separately) * Bolt-in installation—QA1's commitment to thoughtful product design is evident in their fully bolt-in kits, providing an easy installation process Fitment Notes: Must use QA1 lower control arms (sold separately). Not compatible with factory coil springs. Must use QA1 coilover struts or QA1 spring slider kit (both sold separately). Engine mounts sold separately.
Not Yet Reviewed
$734.95
Detroit Speed weld-on subframe connectors join your front subframe and rear frame rails to increase your car's stiffness. These uniquely designed DSE connectors are fabricated from thick-wall rectangular steel tubing. They are bent and TIG-welded in a fixture for accuracy and repeatability. Unlike others, these DSE subframe connectors are barely visible from underneath the car, offering maximum ground clearance. Plus, they won't interfere with seat attachment hardware or the installation and removal of the rear leaf spring pocket. And, your molded factory carpet will still fit over the subframe connectors. Detroit Speed weld-on subframe connectors can be installed on convertibles and are supplied with templates, pictures, and detailed instructions for installation.
( 1 )
$608.95
On Sale
Stifflers Suspension Mustang FIT (Fully Integrated Technology) systems offer a proven way to keep your Mustang's muscles fit! The FIT system integrates the front and rear subframes and ties them into the rocker panels to form a triangulated web of strength and stiffness that helps keep your car in shape for improved handling, launches, and ride quality. The strong steel stiffeners beef up your Mustang for an increased range of suspension tuning and overall performance. Twisting and bending is good conditioning for humans--not vehicles. The best exercise for your Mustang is Stifflers FIT system. Stifflers Mustang Fit System benefits include: * Transfers more power to the ground, not wasting it twisting and bending the chassis * Launches straighter * Stiffer chassis reduces or eliminates interior rattles and extends the life of the vehicle * Weld locations are free of powdercoat--no removal of powdercoat required before installation * Non-intrusive design; no floors to cut, interior to remove, or lines to relocate * Tube ends are sealed to keep out moisture * Ground clearance remains unchanged * Increases side impact safety * Can be used with factory convertible braces with only slight modifications
( 3 )
$569.95
$512.96
Steer Smarts delivers their most extreme steering linkage--Yeti XD Series linkage equipped with their Griffin XD attenuator. They applied 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for a Jeep. Adding a top-mounted drag link to your Jeep was a daunting task, to say the least. But Steer Smarts patented reverse taper mount changed that, making the task a simple process. Steer Smarts YETI XD drag links are completely bolt-on—even the top-mount links, installing in just minutes, bolting to the factory tapered knuckle hole and the factory pitman arm hole. Steer Smarts Yeti XD drag links with Griffin XD attenuator are available in bottom-mount or "No Drill" top-mount versions with red or black bellows. Select the drag link designed for your Jeep. Features: * Yeti XD/Griffin XD assembly: -- Easy bolt-on installation -- Engineered for proper clearance with chassis components, eliminating interferences * Ball joints: -- 30mm 2 1/2-ton ball joints designed specifically for specific Jeep model -- Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Drag link ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long term serviceability -- Forged from medium carbon high-hardened steel and heat-treated for even greater buckling, impact, and fatigue strength. -- Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Griffen XD attenuator: -- Reduces harsh and negative feedback to your steering wheel -- Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength -- Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Internal threads and tube are also e-coated for long term serviceability
( 1 )
$699.00
TCI transmission crossmembers are available for a range of classic vehicles. They feature all-steel construction for maximum strength and durability with less weight than factory parts. Designed with the do-it-yourselfer in mind, TCI crossmembers offer an innovative 3-axis modular design that is adjustable for optimal fitment across a range of applications. Most models also use the original bolt holes, so crossmember installation has never been easier. A powdercoated finish resists scratches and rust and provides a clean, finished look.
Not Yet Reviewed
$538.95
Artec Industries' new JK heavy-duty crossmembers are designed to give your Jeep Wrangler JK better protection beneath the vehicle than the stock unit. Designed using CAD files directly from the manufacturer, these heavy-duty reinforcements ensure that you have a great fit with factory components. Made from CNC-cut and formed 1/4 in. thick steel, the JK heavy-duty crossmembers will hold up to plenty of off-road abuse. They enable you to mount longer arms for greater stability and flex. All nuts are pressed into the brackets for easy removal and installation; the crossmembers use 2.625 in. wide joints or bushings with 9/16 in. holes; they're shipped bare so you can custom finish it however you want. Order the model recommended for your Jeep application.
Not Yet Reviewed
$571.99
Rust Buster comes in with a solution better than the Factory OEM crossmember. The spare tire crossmember is a crucial component designed to enhance the structural integrity of your vehicle's rear frame, ensuring that your spare tire is securely held in place. This repair piece serve as a faithful OE replacement, preserving the authenticity of your vehicle's design while elevating its overall structural integrity. Designed as a bolt-on part, installation is straightforward and hassle-free. Each crossmember is meticulously engineered and features mounting location holes that are slotted for optimal fitment for the perfect blend of strength and durability. For added protection against rust and corrosion, this support piece comes with a rust-preventative oil coating, ensuring your investment stands the test of time. Drive with confidence, knowing your spare tire is securely supported with the quality and precision of a spare tire crossmember by Rust Buster. Order the model for your make/model.
Not Yet Reviewed
$599.99
—
$679.99
Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits feature patent-pending trusses that go to a whole new level of strength, weight savings, simplicity of installation, precision fitment, and complete axle protection. Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits are advanced truss and bracket systems which can be used for AAM 14-bolt 10.5 in. ring gear. The kits provide the factory link, track bar, spring, anti-sway bar, bump stop pads, and shock locations all encompassed in an axle tube reinforcing truss system. Features: * CNC precision laser-cut in-house from 1/4 in. and 3/16 in. mild steel * Lightweight yet strong ... only 42 lbs. total * CNC precision bent in-house for a great fitment--literally drop the truss in place on the axle and it's ready to weld * Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * 2-piece truss design means smaller packaging with easy installation * Using a 1 ton axle will support larger tires and less chance of breakage in extreme conditions * Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets * Save hours of installation time with the built-in axle tube truss which is quicker to weld than individual brackets * Track bar mount includes four locations for those who have aftermarket lifts. Stock height hole is not included though * Coil spring locator is machined from solid steel making welding to bracket quicker than previous tube and cap-style locators * Shock brackets have been moved up for a slightly higher clearance lower control arm bracket * Easily upgradeable for future link geometry changes. Just trim off factory location upper control mounts and weld on a center link mount
Not Yet Reviewed
$604.99
Steer Smarts delivers their most extreme steering linkage--Yeti XD Series linkage equipped with their Griffin XD attenuator. They applied 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for a Jeep. Steer Smarts Yeti XD top mount drag links for a high-steer or drilled-out OE knuckle was designed to be a complete bolt-on for Jeep JKs that have already been modified for a flipped draglink. They install in just minutes and bolt to a sleeved factory knuckle or high-steer knuckle hole and the factory pitman arm hole. They are available with red or black bellows. Select the drag link designed for your Jeep. Features: * Yeti XD/Griffin XD assembly: -- Easy bolt-on installation -- Engineered for proper clearance with chassis components, eliminating interferences * Ball joints: -- 30mm 2 1/2-ton ball joints designed specifically for specific Jeep model -- Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Drag link ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long term serviceability -- Forged from medium carbon high-hardened steel and heat-treated for even greater buckling, impact, and fatigue strength. -- Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Griffin XD attenuator: -- Reduces harsh and negative feedback to your steering wheel -- Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength -- Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Internal threads and tube are also e-coated for long term serviceability
Not Yet Reviewed
$699.00
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$549.95
—
$749.95
UMI Performance Road Race K-Members are designed for serious racers who expose their vehicles to more stress than any street cars will ever experience. Using an additional 1.000 in. of tubing, UMI Performance Road Race K-Members tie together crucial areas. They weigh in at 3 lbs., more than UMI's standard version, but still maintain a much-needed weight savings.
( 3 )
$819.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
