Availability
MagnaFuel ProTuner 750 Series inline fuel pumps feature quiet operation, which makes them ideal for street or performance use. They can support 2,000 hp and up, while offering continuous-duty use. Additional features: * No pump shaft seals * CNC-machined, hard-anodized aircraft aluminum * High-torque custom motor with low current draw * Double support bearing * Can be mounted vertically or horizontally * Polymer wear plates for quiet, smooth operation * 14 amps at 45 psi * -8 AN inlet and outlet (fittings are sold separately)
( 26 )
$529.99
—
$575.99
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$659.95
$509.95
—
$779.95
Finally, an affordable high performance race carburetor! Proform's new Race Series mechanical secondary carburetors are hand-assembled in the U.S.A., utilizing a Proform high-flow carburetor main body. Features include adjustable screw-in air bleeds, high performance down-leg boosters, a high rate airflow section design, a solid billet throttle baseplate, and an adjustable secondary airflow cam bracket. They also have timed and full vacuum tubes for accessories and ease of tuning, a welded throttle shaft, button Torx head throttle plate screws, power valve blowout protection, slip link mechanical linkage, and more. What does all this add up too? Easy--dyno proven horsepower and torque gains without breaking the bank!
( 67 )
$635.95
—
$710.95
On Sale
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
$706.98
Add some muscle! Offenhauser C Series intake manifolds fill the gap between stock and competition setups for 4 and 6-cylinder cars and pickups. They improve torque in the mid and upper ranges, with power bands that span from 2,500 rpm to more than 7,000 rpm. Smaller applications use Holley 5200 or Weber 32/36 Series 2-barrel carbs. Holley 2300s can be used for competition with an adapter. Six-cylinder, 4-barrel versions can use square bore Holley or Carter carbs. Emission-control provisions can be blocked off for competition.
( 23 )
$504.99
—
$628.99
DeatschWerks DW810 brushless in-tank electric fuel pumps provide unprecedented high fuel flow in a reliable, quiet, and compact package. The units optimized impeller design achieves peak efficiency at target flow rates while careful engineering of internal fluid flow eliminates restrictions. The DW810 in-tank electric fuel pumps brushless motor technology reduces friction and heat, vastly improving durability, especially when using aggressive fuels such as ethanol and methanol. DeatschWerks has engineered their fuel pumps to maximize flow at higher pressures. By designing the armature for torque bias, delaying pressure relief activation, and maximizing impeller efficiency, DW has created a line of pumps with an extremely flat flow curve. Higher flow at higher pressure delivers the fuel your engine demands. All DW pump designs go through 1,000 hours of endurance bench testing in a number of fuels to find and eliminate common modes of failures. Upon success, the pump design is in-car tested for several months in real-world conditions before production is approved. Each fuel pump is flow tested at pressure to make doubly sure that it meets DW's high standards of performance before it is labeled and packaged. Product features: * One pump—two times the flow! * 5/16 in., 3/8 in., -6AN and -8AN anodized fittings included * Compact size is optimized for in-tank use * Universal bulkhead harness and fitment kit included with select pump models as noted * Compatible with all fuels including Methanol and E100 * No brushes, plus no commutator equals ultimate durability
( 1 )
$599.00
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$507.67
On Sale
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$811.95
$540.95
—
$844.95
Corsa carbon fiber DryTech 3-D air intakes blend aesthetics and engineering to deliver in a single package. The intakes efficiently direct airflow from the filter to the throttle body. Streamlining the airflow eliminates any calibration concerns, and helps increase throttle response. Features include: * 100 percent carbon fiber construction * Outflows stock intake creating more horsepower and torque * DryTech 3-D synthetic dry filter
( 6 )
$675.99
—
$774.99
Halltech Killer Bee MF103 cold air intake kits offer bolt-on horsepower and torque for your C6 Corvette. These performance induction systems require no additional tuning, however, if you choose to tune, you can expect 31 to 35 RWHP. Killer Bee systems include Halltech's Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and they feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed, plug-and-play Killer Bee induction systems also feature strong and durable XLPE poly construction. They are offered in black or red to complement your red fuel rail covers, and come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 3 )
$619.99
Dart dual plane intake manifolds are designed to improve torque, add horsepower, and make that otherwise stock engine look a little more aggressive. They are manufactured from durable cast aluminum and are machined to tight tolerances for excellent flow characteristics. The manifolds' optimized runner length and plenum style offer improved low end to midrange performance.
( 3 )
$814.95
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$663.95
—
$838.95
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$813.86
$698.27
—
$740.38
Tear up the track with a Trick Flow® Track Heat® intake manifold! These aluminum dual plane manifolds feature a one-piece spider-type design with extended, high-flow runners and a raised plenum floor for more horsepower and torque. Other highlights include A319 aluminum construction, integral bosses for nitrous nozzles, and extra material for custom porting. These intake manifolds deliver peak power in the in the 3,000 to 7,000 rpm range and work with all square bore-style carburetors.
( 17 )
$524.99
Stromberg BIG97 carburetors feature 55 percent increased airflow to put out a whopping 250 cfm! They have the same standard 97 outside shape, but use enlarged 1.175 in. venturi with a super-efficient 20 degree entry angle. The accelerator pump discharge jets are smaller, and flared exit cones build power by slowing down the mixture to reduce turbulence into the manifold plenum. The result is 250 cfm. Stromberg BIG97 Tri-Power carburetors feature: * Signature 97 outside shape and styling * Cast iron base * Reinforced airhorn * Early plenum effect: allows all cylinders to draw from both barrels, giving you dual-plane drivability with a single-plane style top-end horsepower * New power valve circuits improve fuel conditioning: feeds top-end enrichment directly into the emulsion tubes * Ported distributor vacuum: switch in the brass plug (included) and connect your distributor to improve combustion efficiency in cruising mode; you'll run smoother and cooler, with more torque and better fuel mileage * Big S-jet twin-ball inlet valve: accepts 5/16 in. hard line and standard Stromberg fuel fittings * Four finishes available: original equipment style, chrome, chrome/black, or barn find (patina)
( 3 )
$525.00
—
$560.00
Summit Racing™ OE replacement turbochargers are the best choice to replace your worn out, leaking, or failed original equipment units. With more and more vehicles coming turbocharged from the factory, the reality is that most turbos start leaking or the bearings wear out long before the life of the car or truck does and will need to be replaced. We are proud to offer these replacement turbos for various applications, choose the right one for your car or truck. Check out these features and benefits: * 100 percent brand new construction * Direct-fit left and right available * EM spec-cartridge and turbine wheel * OEM spec-housings on brand NEW tooling: tighter tolerances and better finish * Billet compressor wheel with revised and updated Aero: more torque over OEM and OEM replacements * OEM spec rotating assembly for hassle-free operation and longevity * OEM spec oil feed/drain and coolant inlet/outlet: plug-and-play with your existing oil and coolant lines * Increase horsepower, torque, and fuel efficiency over worn OEM turbochargers
( 3 )
$649.99
On Sale
For maximum performance in normally aspirated competition applications, Weiand Hi-Ram Tunnel Ram intake manifolds are the manifold of choice. They're designed primarily for drag racing, truck/tractor pulls, and performance marine applications where high rpm is required but bottom-end torque isn't. With their patented D-shaped port runners and large plenum chamber, the manifolds provide optimum thrust of the air/fuel mixture to the intake ports. They mount either single or dual square-mount carbs and, depending on the application, have power bands that run from 2,500 rpm to as high as 9,000 rpm. Separate tops and runners are available for some manifolds. Order the model recommended for your year/make, engine, and cylinder head application.
( 31 )
$828.95
$649.95
—
$745.95
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 314 )
$652.95
$511.96
—
$604.95
Ford Performance has released the 2018-2023 Mustang GT intake manifold to be available as a replacement part for your 2018-2023 5.0L, or as an upgrade for your 2011-2017 5.0L Coyote engine. Custom calibration is required for the 2011-2017 models. When upgrading to this intake, you can expect improved horsepower and torque over the stock manifold. For the quality parts you need for your Ford, choose Ford Performance Parts.
( 3 )
$509.99
On Sale
Push your racing performance to the next level with Holley Track Warrior carburetors. The aluminum contoured main body design weighs less while adding horsepower and torque. These carbs have screw-in air bleeds for precision tuning capabilities, billet metering blocks, a billet base plate, adjustable secondary linkage, and knurled (hand-adjustable) curb idle screws. Features of Holley Track Warrior carbs include: * Aluminum construction for weight savings and long-lasting good looks * Color options include purple or black * Optimized race calibrations for outstanding throttle response * Contoured Venturi inlet offers balanced airflow for increased horsepower * Four-corner idle for precise idle control * Mechanical secondaries for remarkable tire-turning performance * Billet metering blocks for improved durability (compared to cast blocks) * True gasket sealing and fully adjustable (emulsion bleeds, power valve channel restrictor, and idle feed restrictors.) * Available in 650, 750, and 850 cfm versions * For lightweight vehicles with manual transmissions or automatics with a high stall and low gearing * 100 percent wet-flow tested by Holley technicians to ensure on-arrival performance
( 31 )
$821.95
$738.95
On Sale
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$702.95
$510.36
—
$865.95
Aeromotive A1000 brushless in-line fuel pumps let you upgrade to a fixed-speed, premium unit for faster, more dependable, and uninterrupted fuel delivery--with less power consumption and potential for wear or failure. Utilizing the latest brushless motor technology, these pumps are built for sustained pressure (up to 65 psi) with 90 psi maximum potential. They feature a bedrock-solid roller vane design that primes easily, reduces friction, and improves efficiency. Producing more torque per watt and a higher torque-to-weight ratio, brushless motors deliver less noise, lighter weight, and more reliability. With a higher level of efficiency (down to fractions of a second in design speed control) Aeromotive A1000 brushless fuel pumps provide precise control of fuel pump RPM as pressure rises—better maintaining operation and flow, while producing a flatter flow curve. These tight tolerances result in less current draw, less heat, and extended life. More product features, items, and specifications include: * Extended service life in ethanol and methanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Inlet and outlet ORB-10 ports * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Rated flow of 700 lbs./hr. at 45 psi, 13.5 volts for EFI engines * Rated flow of 900 lbs./hr. at 9 psi, 13.5 volts for carbureted engines * Fuel Injected gas engines rated up to 1,300 HP (naturally aspirated) and up to 1,000 HP (forced air induction) * Carbureted gas engines rated up to 1,500 HP (naturally aspirated) and up to 1,200 HP (forced air induction) * Fuel Injected E85 engines rated up to 910 HP (naturally aspirated) and up to 700 HP (forced air induction) * Carbureted E85 engines rated up to 1,050 HP (naturally aspirated) and up to 840 HP (forced air induction) * Ideal for blow-through carbureted engines up to 1,200 FWHP
( 1 )
$694.99
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$516.00
—
$680.00
Snow Performance stage 2.5 forced induction progressive water/methanol injection kits provide increased performance with or without nitrous. Water methanol injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing, which results in increased power and torque. When used with nitrous, the need for timing retard is greatly reduced or eliminated, and boosted applications especially benefit from reduced intake temperatures. The system includes everything needed for the installation. Order the model for your application.
( 3 )
$583.34
—
$702.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
