Availability
Showing In Stock Items. Show All 102 Items.
FAST LSXR intake manifold runners will restore proper airflow to your intake for the performance you crave. These replacements are available in three sizes: Standard Street, High HP, or Race versions. The manifolds are designed to give you the ability to remove individual runners from the manifold for modification. FAST LSXR runners are yet another reason the LSXR intake is the only choice for your GM LS3/L99/L76 engines. Order the model recommended for your year/make and engine application.
( 2 )
$500.95
—
$602.95
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$649.95
—
$749.95
$583.95
—
$673.95
Airflow is everything in a performance engine and naturally it begins with the air filter, but factory units are downright boxy and can be very restrictive. S&S Cycle tuned induction air cleaner kits utilize two laser-cut and highly engineered tubes merged into a single collector and fed by a pair of high-flow air filters placed directly in the airflow. They are crafted with stainless steel intake runners available in different finishes. The end result--maximum performance for your engine and a stylish package. Select the S&S Cycle tuned induction air cleaner designed for your Harley® model with the preferred finished. Features and benefits: * Bolt-on performance—over twice the filtering area over stock intake system * 44 percent increase in airflow * Smooth intake tract of carefully selected tuned lengths increases performance * High-flow washable and reusable cotton media filter elements provide performance, protection, and economy Note: Will not fit on motorcycles equipped with fairing lower glove boxes or twin-cooled models
Not Yet Reviewed
$675.95
—
$699.95
BladeRunner intake manifolds from aFe Power provide smooth and direct airflow for minimal pressure loss and maximum CFM gains. How do they do it? With innovative MDV technology that uses smooth bends and directional vanes to form multiple paths through the manifold. These paths are smoother and shorter, producing much smaller dead air zones, for increased overall airflow to the engine. You can also expect faster turbo spool-up, improved boost pressure, and an increase in horsepower and torque! BladeRunners are available in configurations for a wide range of vehicles from the 1990s and up. Additional features include: * Proprietary internal bolt design guaranteed not to deform or leak * Cast A356-T6 aluminum construction * Up to 5 port pads (depending on application) threaded for 1/8 in. NPT * Stainless steel hardware
( 5 )
$561.75
K&N elevated intake snorkel kits are built to deliver added protection and confidence when heading off-road and into extreme environments. These systems help ensure a consistent supply of cleaner air to your engine, especially in dusty, sandy, or debris-heavy conditions. By relocating the air inlet to the vehicle's highest point, K&N snorkels help preserve airflow, enhance induction tone, and reduce the risk of water ingestion (not rated for complete water submersion). The one-piece, roto-molded construction offers a durable, integrated appearance and is designed to fit either the factory, K&N, or Airaid cold air intake system (see vehicle-specific fitment details). K&N snorkels are engineered to enhance your vehicle's off-road capability and performance without compromising style. * Helps prevent ingestion of dirt, debris, water * Maintains a clean but rugged OEM-style appearance * Trail-ready installation in approximately 3 hours * Order the kit recommended for your vehicle
Not Yet Reviewed
$589.99
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$659.95
$509.95
—
$754.95
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$736.95
—
$865.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 439 )
$681.95
$509.95
—
$860.95
Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller bottom passages at near sonic speed, improving power and efficiency. When the secondaries open, their charge goes through the bigger, cooler upper passages. Then, in turn, it is rammed into the cylinders when it encounters the high-velocity mix from the primaries. The results are better fuel economy and a 15-30 percent power increase across the entire rpm range. These manifolds are available in a variety of styles and options for many year/make and engine applications.
( 45 )
$799.99
—
$841.99
Intended for 500-plus inch, high-rpm engines, Trick Flow® R-Series intake manifolds for Ford 429/460 provide significant horsepower and torque increases. These single plane intake manifolds feature a one-piece, spider-type design with high-flow, individual extended runners and a raised plenum floor. Other features include A319 aluminum construction, extra material for custom port work, and bosses for nitrous or fuel injection. The intake manifolds are designed for use with Holley 4500 Series Dominator carbs. Overall height to carburetor mounting pad is 8.600".
( 8 )
$724.99
On Sale
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$811.95
$549.95
—
$844.95
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$507.67
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 221 )
$514.95
—
$689.95
Dart dual plane intake manifolds are designed to improve torque, add horsepower, and make that otherwise stock engine look a little more aggressive. They are manufactured from durable cast aluminum and are machined to tight tolerances for excellent flow characteristics. The manifolds' optimized runner length and plenum style offer improved low end to midrange performance.
( 3 )
$814.95
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
( 1 )
$569.95
Trick Flow® R-Series A460 Intake Manifolds deliver significant performance gains in 500-plus cubic inch engines. They are single quad intake manifolds made from lightweight A319 aluminum and include bosses for nitrous or fuel injection. The special one-piece, spider-type design with high-flow, extended individual runners and a raised plenum floor produces sizeable power increases in the 3,500-8,000 rpm range. Additional highlights include extra material for custom porting and a Dominator-style carb mounting pad. R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
( 3 )
$749.99
What's tall, good-looking, and makes tons of power? Trick Flow's® R-Series intake manifold for Mopar 440! Trick Flow® engineers went to work when customers requested an ultra-performance intake manifold for large cubic inch, high-horsepower, big block Mopar engines. The key to the manifold's high-power production is the CAD-optimized, one-piece single plane runner design with a large open plenum—paying special attention to smooth airflow for equal air and fuel distribution. Nitrous users will be happy to find integral bosses that can be drilled and tapped for nozzles, while all engine builders will be glad that Trick Flow® left material around the port openings so the manifold can be port matched and/or fully ported. To keep weight as low as possible, the R-Series intake manifold is made from lightweight yet strong cast aluminum. When it comes to carburetion, you'll find that Trick Flow® machined on a Holley 4500 Dominator mounting flange for maximum performance potential. Designed to produce maximum power with Trick Flow's® PowerPort 270 cylinder heads on 440-based engines working in the 3,500-7,500 plus RPM range, the R-Series intake manifold also performs extremely well with other brand cylinder heads using 270cc and larger intake ports.
( 3 )
$524.99
First off, don't let the Jr. fool you--this Pro-Filer Sniper Jr. intake is just as good as its big brother! The Sniper Jr. intake manifold is optimized for engines 68 to 540 c.i.d. and larger with BBC cylinder heads such as Pro-Filer's Sniper and Sniper X with deck heights of 9.8 in. or 10.2 in. Yes, this is the intake those of you that race in a conventional head class have been looking for! They produce remarkable horsepower out-of-the box, with features such as cast injection bosses, 4500 Series carb flange, four corner water bosses, and exclusive as-cast ported plenum and runners, making this Sniper Jr. intake the best in BBC manifolds!
( 6 )
$749.99
Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.
( 4 )
$822.95
Tear up the track with a Trick Flow® Track Heat® intake manifold! These aluminum dual plane manifolds feature a one-piece spider-type design with extended, high-flow runners and a raised plenum floor for more horsepower and torque. Other highlights include A319 aluminum construction, integral bosses for nitrous nozzles, and extra material for custom porting. These intake manifolds deliver peak power in the in the 3,000 to 7,000 rpm range and work with all square bore-style carburetors.
( 17 )
$524.99
On Sale
Holley EFI intake manifolds feature port-matched upper and lower runners for reduced restrictions. Plus, the EGR passages have been relocated to the outside of the manifold to allow for the use of larger intake ports. The result is greater air capacity, which makes these manifolds the perfect choice for supercharged engines. They're available in a variety of styles and options; select the model designed for your vehicle and/or engine application.
( 6 )
$682.95
$538.95
—
$724.95
For maximum performance in normally aspirated competition applications, Weiand Hi-Ram Tunnel Ram intake manifolds are the manifold of choice. They're designed primarily for drag racing, truck/tractor pulls, and performance marine applications where high rpm is required but bottom-end torque isn't. With their patented D-shaped port runners and large plenum chamber, the manifolds provide optimum thrust of the air/fuel mixture to the intake ports. They mount either single or dual square-mount carbs and, depending on the application, have power bands that run from 2,500 rpm to as high as 9,000 rpm. Separate tops and runners are available for some manifolds. Order the model recommended for your year/make, engine, and cylinder head application.
( 27 )
$649.95
—
$699.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$583.99
—
$669.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
