Availability
On Sale
Nitrous Outlet roll bar mounted bottle brackets are race-proven, quick-release units with a show quality finish. Machined from 6061 billet aluminum, they offer aesthetic appeal, yet are tough enough to handle the hardest launces and shifts, holding a 10/15 lb. nitrous bottle in place while you rail through gears down the track. The quick-release clamps allow you to disconnect your bottle quickly and easily from the bracket for refilling and changing bottles. Nitrous Outlet roll bar mounted bottle brackets are available in several roll bar sizes. Choose your preferred size.
Not Yet Reviewed
$589.99
—
$590.99
$501.49
—
$502.34
Nitrous Express billet spray bar systems include a custom spray bar that injects nitrous directly into each cylinder's intake tube. They're designed to work in conjunction with a programmer that can add nitrous enrichment fuel. A jet/flow sheet with nitrous and fuel lb./h data is included, which makes programming your nitrous fuel enrichment settings quick, simple, and accurate. Some systems include nitrous bottle (various sizes). Order the model recommended for your application. Systems include: * Lightweight billet aluminum and carbon fiber Lightning Series solenoids * Stainless braded lines * Multiple jet settings * Relay and harness * Switches
Not Yet Reviewed
$508.37
—
$617.95
On Sale
Nitrous Outlet X-Series Halo design intercooler systems decrease intake air temperatures, allowing you to fine-tune the amount of nitrous discharge to the intercooler and safely produce more boost. The aluminum halo design allows for an easy and clean install on any intercooler. These systems include stainless steel quick-release bottle brackets—and are available with or without a nitrous bottle with a high-flow valve and dual accessory ports. They also include a nitrous solenoid rated to 200 hp, 20 ft. of -4 AN stainless steel braided main feed line, tuning jets, a relay and harness, electrical wires, and hardware.
Not Yet Reviewed
$675.99
$574.59
For supercharged or turbo applications where nitrous is not an option, Nitrous Express offers these N-tercooler systems as an alternative. These systems spray nitrous over an air-to-air intercooler, reducing air inlet temperatures dramatically. For example, in a dyno test, a turbocharged Honda® equipped with a Nitrous Express N-tercooler increased its baseline by an astounding 52 hp! Now, that's power!
Not Yet Reviewed
$583.02
—
$704.93
VS Racing fuel injectors are the perfect fit for many applications. These are genuine high-impedance Bosch injectors with Denso connectors. They flow 2200cc per minute at 43.5 psi (3 BAR) and are fully compatible with alternate fuels and alcohol. For fast response and excellent flow, replace your injectors with VS Racing fuel injectors. Order the set with options you prefer.
( 13 )
$569.50
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 36 )
$549.99
—
$675.99
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$537.60
—
$806.40
For years, nitrous systems have been just a plate bolted under the carburetor, equipped with two crude brass spray bars to inject nitrous and fuel into the intake charge. Nitrous technology is getting ready to take a huge leap forward! The ZEX Perimeter Plate nitrous systems are complete kits that provide optimum spray efficiency with nitrous and fuel outlets placed at 12 injection points around the perimeter of the intake manifold opening. This technology provides optimum distribution of nitrous oxide and fuel and delivers the most horsepower possible from your nitrous kit. Through ingenious cooling technology called Cryo-Sync, super-chilled nitrous is injected through the ZEX plate before being injected into the engine. This technology rapidly cools the carburetor and intake manifold while you spray, for even greater power. The ZEX Perimeter Plate nitrous systems are tunable from 100 to 300 hp and are compatible with any Dominator or square flange, 4-barrel carburetor application.
( 5 )
$800.95
Instant Rebate
With Vibrant Performance Air-to-Air intercoolers, you're set to handle extreme racing conditions! Vibrant intercoolers feature bar and plate construction designed for overall strength to take on extreme, high-boost applications and deliver maximum cooling efficiency, unlike traditional tube and fin styles. They make the air going to your engine significantly cooler and denser, reducing the likelihood of detonation, while maximizing your turbo's power-making potential! Air-to-Air intercoolers have TIG-welded cast aluminum end tanks and are pressure-tested to ensure a leak-free assembly. Get more power production by cooling the air with Vibrant Performance Air-to-Air intercoolers.
( 1 )
$510.14
On Sale
CSF intercooler cores are the world's best intercooler cores for fabrication of custom intercoolers. They offer intercooler cores in many different styles and sizes including cross-flow, vertical-flow, the 6 in. wide Magnum Series, and ultra-efficient liquid-to-air (water-to-air) cores rated for up to 2000 horsepower. Additional features of CSF intercooler cores include: * Heavy-duty bar and plate construction * Pressure tested at 120 psi for maximum reliability in extreme boost applications * Hand-built using jigs and fixtures for a perfectly straight core and easy welding * Manufactured in a clean room using gloves to ensure proper brazing and clean surfaces for future welding * Multi-louvered, high-precision staggered fin design on both the ambient and pressure sides of the core * Batch-brazed in CSF's state-of-the-art, digital, vacuum-brazing ovens * Strict quality control and quality testing, including individual pressure testing * Individually boxed and protected for secure transport
Not Yet Reviewed
$599.00
—
$629.00
$539.10
—
$566.10
On a budget, but still looking for nitrous for your carbureted ride? Hitman nitrous systems from Nitrous Express can deliver the goods--from 100 to 200 hp, in 50-hp increments--at a price that will appeal to the budget-conscious. They're also great introductory systems if you're just getting into nitrous. On top of that, they feature the "Next Generation" Phase 3 distribution plate that delivers superior distribution and atomization of the fuel and nitrous. Plus, there are no spray bars to sag, split, or disturb airflow into the manifold. The kits include an optional nitrous bottle with a Pure-Flo valve, stainless steel mounting brackets, solenoids, a supply hose, fittings, a switch, and wiring.
( 3 )
$515.85
—
$818.88
On Sale
NOS Powershot nitrous oxide systems are an excellent way to increase the horsepower of your engine. They use a thin, 1/2 in. injector plate that fits between your intake and carburetor. Highly accurate spray bars within the plate simultaneously inject both nitrous and fuel into the manifold, creating a smooth rush of extra power on demand. They're easy to install and are factory-preset to provide 125 hp for V8 applications or 90 hp for V6s. Kits come complete with: * Nitrous and fuel solenoids * Fuel filters * 12 ft. of -4 AN stainless braided supply line * Switches * Wiring * All necessary hardware
( 4 )
$799.95
$583.95
—
$718.95
Instant Rebate
Vibrant Performance Air-to-Air intercooler cores cool the air of your turbocharged engine. These Vibrant bar and plate intercoolers deliver cooler, denser air to your engine, reducing the likelihood of detonation, while maximizing your turbo's power-making potential! Not only are they more efficient than traditional tube and fin styles, but their design makes them stronger and more durable to handle the extreme, high-boost applications of racing! Make more power by cooling your turbocharged engine better and more efficiently with Vibrant Performance Air-to-Air intercooler cores.
( 4 )
$512.04
—
$530.09
On Sale
COBB Tuning 1050x fuel injectors provide increased fuel flow, while maintaining stock idle and drivability with proper tuning. Want to run E85, or need more fueling for your specific application? COBB 1050x fuel injectors are the ticket; simply add the injectors, fuel pump, tune, and you're off to the races. Corrosion-resistant internals make these injectors compatible with all known fuels, and their replaceable inlet filter extends service life. Features include: * Nominal flow rate of 1065cc/min at 3.0 Bar (43.5 psi) using gasoline at 52 degrees C (125 degrees F) * Maximum differential fuel pressure of 10.0 Bar (145.0 psi) * Electrical connector—USCAR * Works with stock fuel rail * Matched sets with dynamic flow rate variance within 1 percent * 14mm bottom O-ring * Data supplied for tuning injectors with Accesstuner Software
Not Yet Reviewed
$625.00
$531.25
These NOS CrossHair nitrous oxide plates have been designed with the serious racer in mind are capable of 350+ hp. They are based off of the popular Double Cross plate and have improved distribution of the fuel and nitrous, helping with today's complex intake manifold designs. The plates feature double down nitrous bars for better distribution and atomization, putting more power down to the track. NOS CrossHair nitrous oxide plates come in a blue anodized finish, your choice of Holley 4150 or Dominator bolt patterns, jets, plumbing, and two gaskets.
Not Yet Reviewed
$573.95
—
$749.95
Summit Bucks
Vance & Hines offers V02 Falcon air intake kits for fitment on a wide range of Harley-Davidson© street bikes from 1991 and up. Developed for the performance-minded enthusiast looking for superior bolt-on power and torque, the VO2 Falcon resets the bar for 90 degree intakes with four superb finishes—including show-quality chrome, ceramic matte black, and two eye-catching carbon fiber choices: high gloss traditional weaved carbon and first for the V-Twin world, matte forged carbon. From its slant-nosed oversized filter for higher volume airflow to its precision-machined billet aluminum winged mounting and integrated breather assembly, the clean minimalist design of the VO2 Falcon yields a streamlined hot rod look that is equally powerful in its simplicity as it is in its performance. Order the model designed to fit your motorcycle. Additional details: * Sleek forward-facing 90 degree intake design * Race-proven intake tube available in four finishes: chrome, matte black, weaved carbon fiber, and forged carbon fiber * CNC-machined billet aluminum backing plate, breather stand-offs and flange cover * Integrated breather assembly using 12-point stainless banjo bolts * Washable high-flow slant-nosed conical air filter with stamped Vance & Hines logo * Matched induction module cover on throttle-by-wire models
Not Yet Reviewed
$549.99
—
$749.99
On Sale
Summit Bucks
Mishimoto universal air-to-water race intercooler cores feature a robust bar-and-plate construction to maximize heat dissipation and improve durability. The fins and bars of each core chamber are optimized to balance flow and efficiency. To make fabrication and customization easy, these cores are shipped in a raw finish and arrive at your doorstep ready to be put to work. Each core is strictly quality-controlled to handle all the boost you can throw at it—and they're covered by the Mishimoto Lifetime Warranty, so you know your build is cooled with Mishimoto quality. Whether you're looking for an intercooler to fit into a tight space, or you're completing your track toy build, Mishimoto has the intercooler core for you. Order the size needed for your engine bay.
Not Yet Reviewed
$582.95
$524.66
On Sale
CSF intercoolers are a complete, full line of intercoolers--with coverage ranging from Audi to Volvo. Several different styles are available, including plastic-aluminum and all-aluminum, with standard tube and fin cores as well as heavy-duty bar and plate cores. CSF OE-replacement intercoolers provide a drop-in fit requiring no modifications. All CSF intercoolers are built to OE specifications, and incorporate the same high-quality and value that CSF has been known for and has represented in the industry for decades.
( 18 )
$699.00
$629.10
Nitrous Express has a nitrous system for people with carbureted vehicles whose high performance philosophy is "too much is almost enough." Their Pro Power plate systems crank out power in spades, from a 100 to as much as a 500 hp increase over stock at the wheels. The heart of these systems is the "Next Generation" Phase 3 distribution plate, which has no spray bars to sag, split, or disturb the airflow into the manifold. Race fuel is required for increases above 150 hp. The kits come complete with: * Nitrous bottle and stainless steel mounting brackets * Solenoids * Relay * Supply line and fittings * Switches * Wiring * Mounting hardware
( 2 )
$776.57
—
$815.15
Nitrous Express Assassin plate conversion ProPower kits provide superior distribution and outstanding atomization. With no spray bars to sag, split, block airflow, or damage, these NX billet plate conversion ProPower kits are truly the next generation in nitrous plate technology. The Assassin is the most technically advanced single stage plate ever designed. The CNC-machined design integrates the nitrous and fuel discharge ports into the outer perimeter. These plate conversion ProPower kits offer a unique perimeter spray pattern that assures perfect nitrous-fuel distribution, which in turn solves the problems commonly found on single plane manifolds, particularly small and big block Fords. Assassin plate conversion ProPower kits include: * Nitrous Assassin billet plate with black anodized finish * Stainless braided lines * Jetting from (100-500 hp) * Carb Studs
Not Yet Reviewed
$554.33
Wagner Tuning performance intercoolers easily replace OEM coolers and provide performance gains, less pressure drop, and lower intake temperatures. Optimized by CAD, most feature bar and plate construction for generally greater heat rejection than many tube and fin designs (models with turbulators offer even greater heat rejection). They are also less likely to be damaged by rocks and debris. Engineered for efficiency and designed to remove bottlenecks, their cast aluminum end tanks were improved further with flow analyses and simulations. Treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics, Wagner Tuning performance intercoolers are a great choice.
Not Yet Reviewed
$560.00
—
$750.00
On Sale
Flowmaster Delta Force cold air intake snorkel kits keep you moving, even when things get deep. Each kit comes with a black custom-molded, cross-linked polyethylene high-flow intake tube that snugs up closely to the A-pillar. It connects to the water-tight air box that features a clear lid for visual inspection. The high-flowing, 8-layer cotton gauze filter provides plenty of air and can be cleaned when things get really dirty. Don't let deep water or mud stop you from reaching your destination—order the Flowmaster Delta Force cold air intake snorkel kit for your Jeep! Product features: * Air box uses factory-style attachment brackets, securely mounting the system in stock underhood location * Included inner and outer hood trim pieces help keep the factory look * Template for cutting the hood for easy installation * Inlet tube clears A-pillar light bar mounts * Performance enhancement * Stainless steel hardware * Protective honeycomb intake screen * No special tuning required
( 1 )
$799.95
$718.95
Want to achieve the perfect cooling capacity needed for your turbocharged engine application? Then consider one of our Summit Racing™ universal intercoolers. Each unit features a bar/plate design and is constructed from quality 6061 aluminum and then TIG-welded to perfection. These intercoolers are perfect for a front mount application. Reducing induction air temperatures, while significantly improving engine output is easy with a Summit Racing™ universal intercoolers. Order the size, finish, and inlet/outlet diameters needed for your vehicle.
( 14 )
$598.99
For years, nitrous systems have been just a plate bolted under the carburetor, equipped with two crude brass spray bars to inject nitrous and fuel into the intake charge. Nitrous technology is getting ready to take a huge leap forward! The FAST Perimeter Plate nitrous systems are complete kits that provide optimum spray efficiency with nitrous and fuel outlets placed at 12 injection points around the perimeter of the intake manifold opening. This technology provides optimum distribution of nitrous oxide and fuel and delivers the most horsepower possible from your nitrous kit. Through ingenious cooling technology called Cryo-Sync, super-chilled nitrous is injected through the FAST plate before being injected into the engine. This technology rapidly cools the carburetor and intake manifold while you spray, for even greater power. FAST Perimeter Plate nitrous systems are tunable from 100 to 300 hp and are compatible with any Dominator carburetor or square flange, 4-barrel carb application.
Not Yet Reviewed
$580.95
—
$827.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
