Availability
Showing In Stock Items. Show All 28 Items.
Holley electronic fuel injectors deliver the performance and quality that you expect when you see the Holley name. They're available either as replacement items to take the place of failed or damaged parts, or as upgrade and tuning items to boost fuel flow when you're cranking up the power in your engine. Many different options are available, including more than a dozen lbs./hr. advertised flow rates. Select the model best suited for your application.
( 43 )
$599.95
—
$749.95
Edelbrock AVS2 Series carburetors are the next generation of carburetors. Featuring annular flow primary boosters, adjustable secondary air valves, and a new calibration, these AVS2 carburetors offer improved idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the carburetor transitions from idle to full throttle. Each annular booster features eight, equally spaced orifices to improve fuel metering. The improved flow metering makes this carburetor ideal for use with a wide variety of small-block and big-block engines with either dual- or single-plane intake manifolds.
( 828 )
$520.95
On Sale
From carbureted to EFI pressures, whether naturally aspirated or employing forced induction, the Aeromotive X1 Series fuel pressure regulators span the entire range, providing dependable fuel pressure regulation. While versatility is one of the X1 regulators' greatest assets, it is far from the only design feature. They also utilize larger inlet/outlet and return ports to accommodate increased flow. Aeromotive X1 Series fuel pressure regulators provide flexible performance that grows along with your fuel system!
( 15 )
$658.30
$592.47
DeatschWerks Bosch EV14 Universal fuel injectors represent Bosch's most advanced multi-port fuel injector technology! These injectors deliver an excellent spray pattern and atomization for optimized idle and tuning. They are provided with tuning data and a custom flow report for an easier tuning process. They have 10 different flow rates; so you can choose the combination of features that best meets your needs. EV14 injectors are offered in three different lengths, two different O-ring diameters, and 10 different flow rates; so you can choose the combination of features that best meets your needs. DeatschWerks Bosch EV14 Universal fuel injectors feature low inertia, ball and seat pintle design, and high quality copper coils to deliver fast and precise opening times.
Not Yet Reviewed
$519.00
—
$819.00
Turbosmart Gen-V HP (high-pressure) comp-gate external wastegates feature a new unique appearance, Gen-V architecture, more options, and more boost. Upgrades include their modularity, improved thermal management, water cooling options, and even more gate flow than ever before. Turbosmart answered the needs of the diesel tuning community years ago with their HP wastegate range. These Gen-V units take all the advances in design and entineering—such as water cooling, rotating housing, industry-leading gate flow, and 1/8 NPT reference ports—and pushes the results to new heights. The new Gen-V HP springs options alone mean as much as 50 psi of base spring pressure. Included in the box is the new Gen-V HP mechanical wastegate with 35 psi worth of pre-loaded springs (10 psi inner and 25 psi outer), all inlet and outlet weld flanges, valve seat and clamps, and basic reference port fittings needed to get set up and running. These wastegates are available in different external relief diameters.
Not Yet Reviewed
$576.95
—
$634.95
UREMCO remanufactured carburetors are expertly built from core to finished product. Purchasing a reman carb can sometimes be iffy ... unless you choose wisely. United Remanufacturing Co. has over 60 years of experience in carburetor rebuilding. As fuel system rebuilders with expertise and stringent standards, they ensure you the best quality at the best price. They rebuild carburetors from most all automobile and truck manufacturers, and each one is individually inspected and rigorously tested on flow-bench engine simulators by seasoned and knowledgeable employees. All UREMCO carburetors come equipped with new needle and seats, base gaskets, gas filters, and accelerator pumps. The extensive process from disassembly, cleaning, and testing to final assembly restores these carburetors back to their original form, fit, and function. When you purchase a UREMCO remanufactured carburetor, you're buying quality, value, and, most importantly, peace of mind. Order the replacement model designed for your vehicle and engine application.
( 810 )
$501.99
—
$589.99
GFB offers a range of high-flowing external wastegates that are small—the most compact size in their class—but are big on flow! These external wastegates are built to cope with the extreme conditions and the harsh environment that's associated with high-boost and exhaust temperatures. Key features include: * Most compact wastegate range on the market for easy installation in tight locations * Body, valve, seat and all mounting hardware is CNC-machined from high-temp stainless steel * Actuator housing CNC-machined from billet 6061 aluminum * Nomex-reinforced silicone diaphragm * Internal shroud protects valve stem from excessive heat and prevents carbon-related sticking * V-band clamp mounting system * Made in Australia under ISO 9001
Not Yet Reviewed
$594.00
Standard Motor offers diesel air intake heaters with a corrosion-resistant material that ensures reliable conductivity connection from the intake air heater relay, which makes for a consistent start up. The air intake heater element coil is designed with highly heat-conductive material for a faster pre-heat start up, therefore, reducing white smoke emission at cold engine start up. The heater element body uses a high-grade steel material that is anti-corrosive ensuring good ground conductivity when seated in the air intake housing, making for a smoother and consistent operation. These diesel air intake heaters from Standard Motor are designed to meet and exceed OE specifications, and are end-of-line quality tested to ensure a better product out of the box every time.
( 2 )
$553.99
Go Fast Bits Deceptor Pro II With Mach 2 Motorized Blow-Off Valve Combos deliver all the performance—with or without the noise! Give your Kia Stinger the sound you want and the performance to go with it. This is a combination kit for the Stinger that mixes the valve types. Since both valves are fed from a common chamber, and there is no MAF sensor, it's no problem to mix and match valve types and venting bias. The combo includes one Deceptor Pro II AND one Mach 2, which still allows you to adjust the venting sound, but at a more affordable price than the twin Deceptor Pro kit. You can adjust the volume of your sound system from the driver's seat, as well as your Stinger's exhaust sound—so why not the BOV sound too? The Deceptor Pro II features the same patented Venting Bias Adjustment System as the Respons TMS, but adds electronic in-cabin adjustment so you can change how loud the BOV venting sound is from the driver's seat! To top it off, if your car typically suffers issues such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio.
Not Yet Reviewed
$625.50
HardDrive softail tanks offer years of leak-free, trouble-free riding. Made from heavy-gauge steel, these gas tanks with dash mount can be used with stock or stock-style seats, OEM-style screw-in gas caps, and the gauge-equipped left side cap. Tanks are available for the carburetor and EFI. Fit your Twin Cam softail with a new tank from HardDrive.
Not Yet Reviewed
$502.16
—
$524.66
Clearance
Pure Energy remanufactured turbochargers are built to the strictest quality standards, implementing design enhancements that improve durability, efficiency, and power. These stringent testing and evaluation processes assure proper performance and reliability standards are met. Pure Energy turbochargers are supported by a free tech support hotline, staffed by ASE certified master technicians with access to extensive vehicle-specific repair data. Quality enhancements include: * Precise dual plane balancing of turbine shaft and compressor wheel eliminates high-speed vibrations, premature shaft and bushing/bearing failures, and assures quick spool up * New OEM design or upgraded CHRA (Center Housing Rotating Assembly) internal components assure reliability and durability * Thrust plates, seating rings, and journal bearings are strategically designed to withstand internal oil pressure and improve lubrication * Electronic and pneumatic actuator function is tested, calibrated, and adjusted for proper pressure relief and boost functions * Mechanical fastener and tolerance verification—all critical points are measured, gauges, torques, and witness marked * Assembly line and end-of-line testing--multi-computer and mechanical test operations monitor the turbo performance
Not Yet Reviewed
$658.99
—
$1,144.99
$501.50
—
$699.50
Clearance
Pure Energy new turbochargers are engineered and built for performance, efficiency, and power. Assembled to the highest quality standards, their new turbochargers go through strict test and evaluation processes to assure proper performance and reliability standards are met. Pure Energy turbochargers are supported by a free tech support hotline, staffed by ASE certified master technicians with access to extensive vehicle-specific repair data. Quality enhancements include: * Precise dual plane balancing of turbine shaft and compressor wheel eliminates high-speed vibrations, premature shaft and bushing/bearing failures, and assures quick spool up * New OEM design or upgraded CHRA (Center Housing Rotating Assembly) internal components assure reliability and durability * Thrust plates, seating rings, and journal bearings are strategically designed to withstand internal oil pressure and improve lubrication
( 2 )
$720.99
$576.50
Racers who use nitrous know that every car presents a unique challenge in mounting your bottle. Nitrous Outlet offers a variety of brackets for specific vehicle applications, enabling you to stabilize your bottle on a flat surface—whether it's on the transmission tunnel between your rear seats, in the spare tire area, on a sidewall of the trunk, or on the floor. These brackets are machined from high-quality aluminum and typically include heavy-duty steel hardware for installation. Unless otherwise noted, the brackets will hold a 10 to 15 lb. nitrous bottle. Secure your fuel boost with Nitrous Outlet brackets.
( 2 )
$624.99
Okay, yes, there are times you wish you could have that signature turbo blow-off sound, but not all the time. Go Fast Bits Deceptor Pro II TMS direct-fit motorized blow-off valves deliver just what you need—the ability to control how loud your BOV sound is, from the driver's seat. Featuring GFB's patented Venting Bias Adjustment System, coupled with remote electronic control, Deceptor Pro II units allow you to infinitely vary how much air is recirculated, and how much is vented to atmosphere. So, if your car typically suffers issues, such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues. GFB Deceptor Pro II features and benefits: * Adjust your BOV venting bias electronically on-the-fly * Revised porting to optimize flow and venting bias * Compact design fits in most factory valve locations * Bore finishing process ensures a lifetime of reliable operation * Direct bolt-on for most vehicles available * Remote proportional venting bias/volume control- from silent to loud or anywhere in between * Sleek, compact in-car BOV volume controller with backlit dial * End-point adjustment to control maximum vent to atmosphere bias setting * Volume adjustment mechanism driven by a high-torque geared electric motor * Durable, low-friction gear train supported by precision sealed ball-bearing * Supplied with all parts and wiring required to have it up and running quickly and easily
Not Yet Reviewed
$805.50
On Sale
A4 carbureted fuel pressure regulators from Aeromotive use a "soft-seat" design, eliminating pressure creep at idle and on the throttle stop. This exclusive design ensures precise pressure control, resulting in more consistent ETs.
( 1 )
$594.65
$535.18
On Sale
Earl's Performance Dominator in-line billet fuel pumps are for those of you who are in need of a fuel pump that can support serious horsepower. Have a nitrous system, turbo or supercharger? No problem! These fuel pumps feature a twin-pump design that allows you to use one pump for cruising and both pumps when you activate your nitrous switch or start building boost. The second pump allows you to eliminate the unnecessary recirculating and heating of fuel that can lead to poor performance and hot fuel issues. Earl's Performance Dominator in-line billet fuel pumps also have an added benefit for hard core enthusiasts that run events like the Hot Rod Power Tour or the Baja 1000; that extra pump brings you peace of mind that you'll always finish what you've started. Features include: * Billet aluminum construction for durability and good looks * -10 AN O-ring inlet/outlet for high flow and superior sealing * Suitable for use with carbureted or EFI applications * May be fully submerged in-tank for custom applications, space savings, and reduced plumbing * Compatible with 12 V to 18.5 V systems at pressures up to 80 psi for street or race use * For hardcore race use, both pumps can be wired for full-time duty * Only 7.66 in. long x 5 in. wide x 2.5 in. tall for easy installation on frame rails or other tight areas * Patent pending dual-pump technology * Proven durability beyond 3,000 hours * Weighs only 5.1 lbs.--half a pound less than competitive 1000+ hp pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$573.95
Tanks Inc. manufactures fuel tank kits that look like an OE tank when installed. The fuel pump and sending unit are recessed in the tank for easy installation, with no modification needed to your car. In most applications, these tanks are fuel injection ready. They are all manufactured from galvanized steel with a silver powdercoat finish. Tanks Inc. fuel tanks are perfect for your pro-touring, autocross, or road racing ride. NOTE: These are standard stock replacement kits for carbureted engine applications. They include the sending unit and pump in the tank, ready-to-go for installation. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank Kit options.
( 68 )
$596.99
Bring your carburetor into the new generation by going green. These Quick Fuel E85 billet metering block conversion kits feature standard calibration, screw-in idle feed restrictors, no secondary power valve provision, and a 4-mixture idle screw setup. The metering blocks are CNC-machined from billet aluminum and green anodized for protection. Specifically designed for use with E85 fuels, these Quick Fuel E85 billet metering block conversion kits will give your carburetor the adjustability you've been looking for, all while protecting the environment and going green.
( 8 )
$573.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
