Availability
Showing In Stock Items. Show All 28 Items.
On Sale
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
$706.98
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$724.93
—
$734.93
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$568.89
$512.89
—
$744.34
You can give small block Chevys the nostalgic look of days gone by, as well as a healthy dose of performance, with Edelbrock's Three-Deuce intake manifolds. The balanced, 180 degree firing order arrangement of their port runners produces a broad power band that runs from idle up to 5,500 rpm, for power where you need it. In addition, they have a cast-in exhaust-gas heat riser and a front boss for an oil filler tube.
( 4 )
$545.95
On Sale
Edelbrock Ford flathead intake manifolds are designed to give your flathead engine more power. They are made of aluminum and feature a natural finish. The intakes are available for dual carburetor 1938-48 engines or in a single 4-barrel version for 1949-53 engines.
( 1 )
$519.95
—
$703.95
On Sale
Holley LS split design carbureted intake manifolds are single-plane racing units designed with performance in mind. They feature a race-bred, 2-piece split feature that was previously only found on the most expensive race intakes. The manifolds will fit GM LS Gen III engines with cathedral port heads—and are intended for 4150-style square bore flanged carburetors or throttle body EFI. The LS Race single-plane intake manifold was designed for high performance/racing engine applications, 5.3 to 6.2+ liter displacement—and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the rpm spectrum, while providing maximum performance up to 7,000 rpm. Features include: * Maximum performance race design with hood clearance consideration * Lighter than other split race intakes * Split feature allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap * Shoulder bolt locators and O-ring seal make reassembly simple and precise * 33 to 50 percent the price of other split race intakes * Vacuum port options: Two 1/8 in., one 1/4 in., and one 3/8 in. NPT ports at the carb flange
( 6 )
$725.95
$583.95
—
$749.95
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
( 1 )
$569.95
On Sale
Developed with performance in mind, Holley EFI LS single plane split-design race intake manifolds feature a race bred, 2-piece split design that was previously found only on the most expensive race intakes. These manifolds will fit GM LS Gen III engines with cathedral port heads for high performance/racing engine applications with 5.3 to 6.2 liter displacement and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. The single-plane design provides optimal performance across the rpm spectrum, while the split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, makes custom porting and matching a snap. Shoulder bolt locators and an O-ring seal makes reassembly simple and precise.
( 4 )
$821.95
$628.95
—
$738.95
On Sale
Holley EFI Coyote Hi-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on Ford Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finishes, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20 percent more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration. Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup * Two 1/8 NPT ports on all manifolds. Two 3/8 NPT ports on all manifolds
( 1 )
$924.95
$601.95
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
$508.95
—
$620.95
Holley EFI Coyote Hi-Ram intake manifolds are available with the BASE ONLY, no top included, if desired. The aluminum bases are offered in a black or natural finish. However, if you want the complete intake manifold system, here is the description: Holley EFI Coyote Hi-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finishes, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20 percent more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration. Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup * Plenum Volume: 300-910 / 9.8-liters * Two 1/8 NPT ports on all manifolds. Two 3/8 NPT ports on all manifolds
Not Yet Reviewed
$574.95
—
$620.95
On Sale
Bolt a carburetor onto your LS engine using Holley LS mid-rise carbureted intake manifolds. These intake manifolds work on all GM LS, Gen III, or Gen IV engines equipped with rectangular or cathedral port cylinder heads. Available in a single or dual plane design, these manifolds use an O-ring cylinder head mounting flange to provide an OEM seal and make installation a snap. You'll also receive mounting bolts, washers, and pipe plugs for the manifold vacuum and MAP sensor ports.
( 46 )
$549.95
Designed from the ports up to provide Ultimate Bolt-On Performance™, Trick Flow's® R-Series intake manifolds will help your big block Mopar make loads of power. The manifolds are designed for use on large cubic inch engines making peak horsepower in the 3,500-7,500 plus RPM range. The manifolds have CAD-optimized, large open plenums and one-piece, single plane runners. Special attention was paid to smooth airflow for equalized air and fuel distribution. Casting the manifolds in lightweight A319 aluminum delivers a substantial weight reduction. Extra material around the port openings allows for port matching and/or full porting. Integral bosses cast into each runner can be drilled and tapped to accept nozzles for nitrous applications. And if all these features don't convince you that Trick Flow® R-Series intake manifolds mean business, the Holley 4500 Dominator carburetor flanges surely will. While designed to produce maximum power with Trick Flow's® PowerPort 270 and 295 cylinder heads, the R-Series manifolds also perform extremely well on engines equipped with other brands of cylinder heads with 270cc and larger intake ports.
( 3 )
$524.99
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$1,049.95
$579.95
—
$749.95
Building on the success of the Victor Jr. LS1 manifolds, the Super Victor LS1 carbureted intake manifolds offer greater airflow potential for ever bigger power gains from these modern engines. The carb mount pad is 1.12 in. taller than the Victor Jr. LS1 manifolds, and the port exits have been increased to 1.08 in. x 2.74 in. For bolt-on convenience, use Edelbrock's timing control module to drive the stock coil-on-plug ignition system. Plus, these manifolds have already been approved by NASCAR for use in their Grand National division/Busch North spec engine series.
( 1 )
$663.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$1,049.95
$558.95
—
$649.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 441 )
$530.95
—
$669.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$509.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$583.99
—
$669.99
Edelbrock Performer RPM dual-quad Air-Gap intake manifolds are designed to give your ride classic hot rod looks with modern-day performance. These manifolds stand just 1 5/8 in. taller than the original Edelbrock low-profile C-26 intakes and offer superior performance improvements in the 1,500-6,500 rpm range. The large runners feature Edelbrock's unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge. These aluminum dual-quad intake manifolds are available in your choice of natural or the popular EnduraShine finishes.
( 21 )
$595.95
On Sale
Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.
( 10 )
$514.95
Edelbrock's Torker intake manifolds feature a single-plane, low-rise design for street high-performance engines where low-end torque is not a requirement. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
Not Yet Reviewed
$562.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
