Availability
Showing In Stock Items. Show All 34 Items.
Aeromotive 1988-97 Chevy Truck Dual 340 in-tank fuel pump modules are direct drop-in units for the specified years of GM 1500/2500 V8 trucks. Featuring dual 340 lph pumps, they can support up to 1,400 FWHP on gas/fuel injection/forced induction and up to 980 FWHP on E-85/fuel injection/forced induction. 100 micron pump pre-filters are included. Additional features: * No drilling required for installation * Individual wiring terminals for each pump to accommodate a staged system * Single -08 ORB outlet port for easy plumbing * Outlet, return, and vent ports include -08 90-degree swivel fittings * Vent port adapter fitting * 0-90 Ohm fuel level sender
Not Yet Reviewed
$725.70
Aeromotive VaporWorx BoostWorx returnless PWM controllers for dual fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM dual-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pump
Not Yet Reviewed
$683.25
The FUELAB dual pump plate mount in-tank fuel pump will fit directly into any top plate flange that meets SAE 10-screw specifications. Ideal for use with a high-performance E85 compatible upgrade to an existing sumped or baffled aftermarket in-tank system. FUELAB dual plate in-tank fuel pumps use the highest quality materials for long-lasting performance.
Not Yet Reviewed
$550.00
DeatschWerks DW810 brushless in-tank electric fuel pumps provide unprecedented high fuel flow in a reliable, quiet, and compact package. The units optimized impeller design achieves peak efficiency at target flow rates while careful engineering of internal fluid flow eliminates restrictions. The DW810 in-tank electric fuel pumps brushless motor technology reduces friction and heat, vastly improving durability, especially when using aggressive fuels such as ethanol and methanol. DeatschWerks has engineered their fuel pumps to maximize flow at higher pressures. By designing the armature for torque bias, delaying pressure relief activation, and maximizing impeller efficiency, DW has created a line of pumps with an extremely flat flow curve. Higher flow at higher pressure delivers the fuel your engine demands. All DW pump designs go through 1,000 hours of endurance bench testing in a number of fuels to find and eliminate common modes of failures. Upon success, the pump design is in-car tested for several months in real-world conditions before production is approved. Each fuel pump is flow tested at pressure to make doubly sure that it meets DW's high standards of performance before it is labeled and packaged. Product features: * One pump—two times the flow! * 5/16 in., 3/8 in., -6AN and -8AN anodized fittings included * Compact size is optimized for in-tank use * Universal bulkhead harness and fitment kit included with select pump models as noted * Compatible with all fuels including Methanol and E100 * No brushes, plus no commutator equals ultimate durability
Not Yet Reviewed
$599.00
Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition
( 1 )
$502.90
—
$630.20
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$755.49
Rhodes Race Cars fuel pump modules will convert your fuel setup to fuel injection or switch to an internal pump—and they do it with style. These pump modules from RRC are easy to install; simply unbolt your cap, install the module, hook up your power and ground wire, plumb your fuel system, and you're ready to go. There's no need for any modifications to your fuel cell. Rhodes Race Cars fuel pump modules are available in different LPH with attractive black, red, or blue caps—and will include all necessary hardware and full instructions. Choose either single or dual-style module with or without pump.
( 7 )
$599.95
DeatschWerks DW440 brushless in-tank electric fuel pumps have a total height of only 4 in., making them easy to retrofit into any OE pump module. Brushless technology reduces friction and heat, increases efficiency, vastly improves pump lifespan in ethanol and methanol fuels—and allows higher voltage inputs for increased flow! These pumps move 440 lph of fuel at 40 psi. Each fuel pump includes a controller, which accepts an 8-22 V DC input and creates a digital signal to allow precise speed and torque control. The controllers are available in three configurations: single speed, dual speed, and PWM-controlled. Controller are designed to be used with voltage boosters, and the pump kits also include bulkhead wiring.
( 1 )
$520.99
—
$579.00
FiTech Force fuel systems make the upgrade to fuel injection easier! They simply connect to a stock mechanical or electric fuel pump, then supply the EFI system with high pressure through the use of an internal 340 lph (approximately 90 gph) pump. The strong, versatile bracket allows mounting under your existing fuel pump, which feeds the units. The assemblies hold a half-gallon of fuel to submerge the internal pump and keep it cool for long life, with no chance of fuel starvation. An internal regulator maintains the pressure at a consistent 58 psi—which is ideal for reliable EFI performance. Order a FiTech Force fuel system and forget about running a new feed line from the tank! Models are available in different configurations. Features, items, and specs: * Serviceable 10-micron fuel filter keeps the finest debris away from the injectors * 5 ft. of high-pressure fuel hose * AN fittings * Clamps * Precision-machined extrusion designed for strength and sealed tight * Easy-to-view fuel pressure gauge installed for quick checks * Heavy-duty wire terminals to complete the installation
( 18 )
$547.00
Aeromotive VaporWorx Ally DualX PWM controller kits are compatible with any OEM fuel system control module when using OEM fuel modules with either an OEM Fuel System Control Module (FSCM) or aftermarket ECM pulse driver. They allow the OEM FSCM to control the primary pump while the Ally DualX controller "piggybacks" and takes care of the second. The controller takes its operating commands from the FSCM pulsed wire--no user programming, system changes, or adjustments are needed. In this way, there is sufficient power for all fuel pump modules while maintaining full FSCM CAN feedback and diagnostics. Ally DualX kits perform the following basic functions: * Whenever the primary pump is running, the Ally DualX controller will also be running. This is typically used with OEM fuel pump modules. It is important to have the second fuel pump module running all the time or else it may run dry under some conditions. * Whenever the ECM is providing either a positive or negative pulse, the Ally DualX controller will also be running the primary fuel pump(s). This is typically used with aftermarket ECMs + naked pumps in a mechanically pressure regulated fuel system. Aeromotive VaporWorx Ally DualX PWM controller kits feature: * Everything needed electrically to drive the fuel pump module * Unmatched low fuel level capability when using an OEM fuel module as the second pump * A 1/2 to 2/3 reduction in power to the fuel pump during idle/cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset that will operate indefinitely without damage * Short circuit protection with automatic reset that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * 10 to 22 V operating capacity * Can be used with voltage boosters
Not Yet Reviewed
$502.90
Holley Dominator billet fuel pumps feature a patent-pending twin-pump design. It allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost. By staging the second pump, you eliminate the unnecessary recirculation and heating of extra fuel, which can lead to poor performance and hot fuel issues. They can also be wired for full-time duty to get the maximum performance and are proven with an 18 V compatibility at pressures of up to 80 psi. At only 5.1 lbs., they weigh half a pound less than other 1,000 hp pumps, and yet they have twice the features. Features include: * Billet aluminum construction with anodized finish * -10 AN O-ring inlet/outlet for high flow and superior sealing * Excellent for use with carburetor or EFI applications * Compact for easy installation on frame rails or other tight spaces * Proven durability beyond 3,000 hours in gasoline or diesel fuels * Fully sealed, can be submersed if necessary
( 13 )
$699.95
FUELAB universal in-tank brushless fuel pump kits provide everything needed to get up and running with the latest pump technology. Designed for easy installation with many popular options, each kit includes a brushless fuel pump, PWM pump controller, 3-wire hermetic bulkhead feed-thru, pre-filter, wire leads and hardware. Order the kit best suited for your application.
Not Yet Reviewed
$800.00
When it comes to converting to EFI, it's important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it's quieter plus there's no chance of fuel starvation. To help ease the installation of an in-tank pump, we offer a new Go Fuel In-Tank Module assembly. This universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two size of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version. Go Fuel in-tank modules are a direct fit into fuel tanks offered by TANKS Inc.
( 25 )
$532.00
Aeromotive VaporWorx Ally Returnless PWM (Pulse Width Modulation) electronics kits for the KPM1500 fuel pump include the necessary parts to modify the KPM1500 (not included) to make it work properly for FSCM (fuel system control module)-equipped vehicles and aftermarket ECM/FSCM systems. The weakness of the OEM FSCM is power capability--they can drive one high-power pump, but not two. That's where VaporWorx Ally PWM kits come in. They provide the components needed to drive the second (KPM1500) fuel pump electrically while the FSCM handles the primary. Using pulse width modulation to slow down the pumps is very effective in keeping fuel temperatures down and relieving the electrical system of excessive load. Ally controllers help reduce the amount of power that the FSCM has at higher fuel demand, so at higher duty cycles the VaporWorx controller will start to out-run the FSCM and take more of the pumping power load. These Aeromotive VaporWorx kits are intended to be used as an Ally, or piggyback, system to help the OEM FSCM. No additional relays, Hobb's switches, etc. are needed.
Not Yet Reviewed
$577.15
DeatschWerks X2 Series fuel pump modules are available for a variety of models. These assemblies are compatible with gasoline or ethanol. Order the model recommended for your application.
( 1 )
$649.00
—
$669.00
Aeromotive continuous duty Eliminator fuel pumps support big horsepower and maintain the driveability necessary for a true high performance street car. Designed for high horsepower street/strip applications, EFI, or carbureted, they feature Aeromotive's "dual chamber" pumping mechanism. The pumps are available in external or in-tank models. Additional features include: * -12 AN O-ring boss inlet port and -10 AN O-ring boss outlet port * Fully submersible for custom in-tank pump placement * 25 percent more flow at pressure than Aeromotive A1000 fuel pump * Supports naturally aspirated EFI engines up to 1,900 hp * Supports forced air induction EFI engines up to 1,400 hp * Supports naturally aspirated carbureted engines up to 2,300 hp * Supports forced air induction carbureted engines up to 1,700 hp
( 2 )
$687.99
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$649.00
—
$799.00
On Sale
Holley fuel cell EFI pump module assemblies are the easy way to upgrade your racing fuel system! And even though the name includes EFI, the modules can also be used as an upgrade for carbureted systems, with the proper regulator. Designed as drop-in direct replacements for your existing 6 or 12-bolt flange fuel cell cap assembly, the billet top flange includes an 8 AN inlet port, a 10 AN outlet port, and a fuel filler cap. They offer a fully adjustable fuel pump depth from 7.5 in. to 12 in. deep, and the modules are available in single or dual 255 lph and 450 lph fuel pump configurations. Holley fuel cell EFI pump module assemblies include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Order the model that best suits your application.
( 6 )
$649.95
—
$799.95
Holley 450 lph fuel pump modules feature billet pump flanges that connect to either single or dual 450 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 450 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
( 2 )
$549.95
—
$723.95
Holley 340 lph fuel pump modules feature billet pump flanges that connect to either single or dual 340 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 340 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
Not Yet Reviewed
$516.95
—
$649.95
Aeromotive Phantom 300 universal diesel fuel pumps offer the classic Phantom design with Aeromotive's cutting-edge fuel delivery technology for the diesel market. Designed for racing applications, the Phantom 300s will ensure the consistent flow you've come to expect, and they are available in single and dual pump models. Choose the one your prefer. Specs and additional features and benefits: * Single pump flow ranges: -- Low range 81.98 gal./hr. at 16 psi, 7 amp, 13.5 V -- High range 37.5 gal./hr. at 100 psi, 14 amp, 13.5 V * Dual pump flow ranges: -- Low range 163.96 gal./hr. at 16 psi, 7 amp, 13.5 V -- High range 75 gal./hr. at 100 psi, 14 amp, 13.5 V * In-tank gerotor pump stays cooler and quieter than an exterior pump * Has a higher flow than most factory lift pumps * Extended bracket length allows for installation in deeper tanks (6 to 20 in.) * 300 micron pre-filter is included
Not Yet Reviewed
$693.35
Aeromotive VaporWorx BoostWorx PWM controllers for DualX ZL1 universal applications simplify installation and increase overall fuel system performance for dual OEM ZL1 fuel module applications. DualX uses a progressive ramping strategy with connections on the controller for the primary (pump 1) and follower (pump 2). The follower pump runs at lower duty cycle than the primary, allowing the follower pump to be on at all times, but at a lower average power, and allowing the pumps in the follower module to continually fill the reservoir with fuel, so it is ready to feed the engine under the most challenging conditions. As the primary pump increases in duty cycle, so does the follower, and once the primary is at 100 percent, the follower continues to increase to 100 percent duty cycle, as needed. This strategy is automatic and requires no user programming or adjustments. BoostWorx PWM DualX ZL1 fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, Hobb's switches, or filters needed -- OEM fuel level sensor can be used if desired * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * Can be used in constant or manifold referenced fuel pressure modes -- Manifold referenced suggested to further reduce electrical demand
Not Yet Reviewed
$630.20
FUELAB Titanium fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank * 1/4 in.-28 hardware to mount to most fuel cell nut rings (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$800.00
On Sale
Holley drop-in fuel module assemblies cover a wide range of vehicles and performance expectations—including dual pump designs. These replacement assemblies meet the highest-quality standards offered for increased performance and fuel efficiency. Holley drop-in fuel modules are capable of supporting 550-plus horsepower right out of the box! Dozens of models are available, with flow rate options between 50 and 277 gph. Order the fuel module recommended for your vehicle. Features may include: * Plug-and-play wiring harnesses * Integrated fuel storage and filtration technology * Built-in, pre-calibrated fuel level sensors * HydraMat filter (keeps fuel available at the pick-up during radical maneuvers and provides contamination protection) * Most models include sending unit
( 8 )
$535.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
