Availability
Banks Power Monster-Ram intake elbows may look unassuming, but these simple, direct-replacement elbows provide instant power, performance, and acceleration gains! Designed to improve airflow from the intercooler, these air inlets raise boost without increasing backpressure at the turbine. Banks used the latest in electronic computational fluid-dynamic technology to create a larger, less restrictive design than the stock intake. Simply put, Monster-Ram intake elbows allow for a greater flow of oxygen-rich, cooler, denser air into your cylinders for instant torque, responsiveness, and greater fuel economy! Banks Monster-Ram intake elbows provide up to six ports for water, methanol, propane, and nitrous injection, or pressure/temperature sensors—the possibilities are unmatched for performance expandability. Tested on the flow bench, and dyno and real-world proven, Banks Monster-Ram intake elbows unleash the free-breathing power that your engine is craving! Order the model designed for your vehicle application.
( 30 )
$718.00
—
$748.00
Roto-Fab Big Gulp Series air intake systems were designed to feed the air demands of the fastest cars in the world. Don't leave horsepower on the table—get the most out of your modifications. Order the kit recommended for your specific vehicle. Roto-Fab Big Gulp Series air intake system features and notes: * Innovative air box coupling: allows for solid mounting to the air box as the system transitions from the air filter clamping surface; seals out unwanted engine heat * Air box seals effectively to the hood, allowing for maximum air filter size and air box volume * Utilizes the full factory air inlet to ensure low IATs and maximize performance * 100 percent silicone hose couplers to ensure lasting product quality * Custom fabricated inlet elbow to maximize performance and airflow cross-section * Oversized breather port to further accommodate high-horsepower applications * Polymer duct work is also effective in reducing heat transfer * Requires a custom tune for your vehicle
( 4 )
$614.95
—
$719.95
If you are looking for the convenience of an oil-free air filter, Roto-Fab dry cold air intake systems put a new spin on great performance and sound. Roto-Fab developed these intake systems to utilize all the available space to package a huge air box and massive filter while maintaining an extremely effective barrier against engine bay heat. Their intake packages perform well as a "stand alone" modification while being capable of meeting the higher air demands of supercharged and high-horsepower builds. Roto-Fab's open top design effectively seals to the hood which maximizes air box volume while providing all of the advantages of a lid. Features include: * Top-quality components throughout including: high-gloss silicone hose couplers, stainless steel hose clamps and fasteners, and molded-in inserts for air box and MAF sensor mounting * High-quality filters designed to last the life of the vehicle * Depending on application, systems are available with or without sound tube delete * Detailed, step-by-step instructions are included for easy installation * Where applicable, the logo badge on the air box has a black anodized finish with a laser-etched Roto-fab logo
( 41 )
$509.95
—
$574.95
Roto-Fab cold air intake systems supply your ride with maximized power gains and an impressive appearance. Their selection of American-crafted systems includes several options that will also provide awesome sound, as well as CAI setups for supercharged (S/C) applications where air demands are higher. Most Roto-Fab intake systems install without modifications and perform well with stock calibrations. Their S/C systems offer great tuning capabilities to gain the most from your setup. All feature large duct sizes, generous air box volumes, and oversized filters. The air boxes come standard with a high-gloss black powdercoat finish. Whether naturally aspirated or supercharged, Roto-Fab cold air intake systems are designed to fit better and deliver a performance difference you will see and feel.
( 93 )
$509.95
—
$689.95
Corsa carbon fiber DryTech 3-D air intakes blend aesthetics and engineering to deliver in a single package. The intakes efficiently direct airflow from the filter to the throttle body. Streamlining the airflow eliminates any calibration concerns, and helps increase throttle response. Features include: * 100 percent carbon fiber construction * Outflows stock intake creating more horsepower and torque * DryTech 3-D synthetic dry filter
( 6 )
$675.99
—
$774.99
Halltech Killer Bee MF103 cold air intake kits offer bolt-on horsepower and torque for your C6 Corvette. These performance induction systems require no additional tuning, however, if you choose to tune, you can expect 31 to 35 RWHP. Killer Bee systems include Halltech's Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and they feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed, plug-and-play Killer Bee induction systems also feature strong and durable XLPE poly construction. They are offered in black or red to complement your red fuel rail covers, and come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 3 )
$619.99
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow S&B oiled cotton filters are built with four or eight layers (for diesels) of the highest-quality cotton gauze. They use deeper and wider pleats with more pleats per filter. Plus, their manufacturing process yields filters with almost no "bleed", creating a greater open surface area. All of this adds up to more surface area per filter, and that means more airflow with excellent protection. All S&B cotton air filters are washable and reusable and will protect your engine from harmful dirt and debris. Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 435 )
$699.00
Halletch Hornet cold air intake kits are designed for the C8 Corvette Stingray Coupe. These direct CAI replacements require no modifications and no tuning. They're dyno-tested for a 17+ increase in horsepower and 25+ increase in torque. Additional product details: * The stainless backplate ensures all harness fasteners and the antenna are attached in their factory locations * You will reuse your stock t/b connector hose, pcv fitting, left and right inlet ducts, and mounting bolts * The huge filter has nearly 1,000 square inches of filtration * Our molded-in velocity stack and reverse flow partition ensures laminar flow at the MAF sensor * Filter box is made from military-grade XLPE * Patent pending * Engineered and designed for the coupe (will not fit the hard top convertible without slight modifications to the cover under the trunk carpet)
( 1 )
$795.00
aFe Takeda Momentum Pro Dry S cold air intake systems provide extreme performance without compromising style. Outflow your factory intake, and allow your car's engine to breathe and perform to its greatest potential with aFe Takeda Momentum systems. Features include: * High-quality, one-piece, roto-molded sealed housing with auxiliary air inlet * Housing is heat soak-resistant cross-linked polyethylene * CAD-designed, dyno-tuned, roto-molded intake tube * Built-in sight window provides easy inspection of filter without disassembly (not on all styles) * Pro Dry S 3-layer oil-free progressively finer synthetic media for efficient filtration * Unique filter-to-housing interface for easy installation * No cutting or drilling on factory parts * Premium clamps and hardware are included * Stainless steel clamps and a silicone coupling for strength and durability (not on all styles) * Takeda Momentum intakes are designed with fewer parts for a quick and simple installation
( 3 )
$516.00
—
$535.00
aFe Momentum HD Pro 5R air intake systems are designed to give your Cummins, Power Stroke, or Duramax the air it demands. All Momentum HD systems are application-specific, dyno-tested, and tuned to provide maximum horsepower and torque. The Momentum HD Pro 5R intakes are designed around massive Pro 5R performance 360 degree, radial-flow air filters with five layers of progressively finer, mesh cotton media. Their unique air filter-to-housing interface (patent pending) allows for maximum filter size that increases the available air volume while simplifying the installation process. The air filters are wrapped in reinforced metal providing maximum strength to prevent filter collapse. Features and benefits include: * Larger filter—more capacity * One-piece sealed housing uses factory mounting points for hassle-free installation * Large, clear sight window for hassle-free filter inspection and aggressive style * High-quality, CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit * Premium clamps and a silicone elbow coupling for flexibility and secure installation * Most systems are available with an auxiliary air scoop (sold separately) * Urethane plug included to block off the auxiliary air inlet and completely seal the air box * Ideal for extreme performance without compromising style
( 2 )
$553.00
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$518.95
—
$599.95
K&N Blackhawk cold air intake kits not only look impressive under the hood, but they are also designed to improve airflow while providing outstanding filtration to protect your engine. The designs have undergone rigorous testing, and the resulting power and torque gains have been impressive. They feature lightweight aluminum tubing cut and shaped to precise specifications, surfaces are carefully hand worked to remove any rough edges or metal burrs, and a K&N engraved metal plate is welded in place. The tubes are then powdercoated with a durable flat black finish. The kits include a black DRYFLOW synthetic washable air filter with thick, low-restriction filter media, which protects the engine without the need for air filter oil. These assemblies include all the hardware necessary for an easy installation. The air must flow--and it will when you order the K&N Blackhawk with DRYFLOW cold air intakes best suited for your application!
( 268 )
$500.50
—
$524.99
Don't let your stock air box hold your vehicle's performance back. The experts at Trick Flow® have engineered TFX™ cold air intake kits to meet the intake airflow demands of your fuel injected ride. The kits replace your restrictive air cleaner with a low-restriction reusable filter, a tuned molded black plenum (where applicable), mounting hardware, and instructions. They are manufactured by K&N for Trick Flow®.
( 113 )
$515.99
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$524.99
—
$682.99
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$573.00
—
$729.00
K&N elevated intake snorkel kits are built to deliver added protection and confidence when heading off-road and into extreme environments. These systems help ensure a consistent supply of cleaner air to your engine, especially in dusty, sandy, or debris-heavy conditions. By relocating the air inlet to the vehicle's highest point, K&N snorkels help preserve airflow, enhance induction tone, and reduce the risk of water ingestion (not rated for complete water submersion). The one-piece, roto-molded construction offers a durable, integrated appearance and is designed to fit either the factory, K&N, or Airaid cold air intake system (see vehicle-specific fitment details). K&N snorkels are engineered to enhance your vehicle's off-road capability and performance without compromising style. * Helps prevent ingestion of dirt, debris, water * Maintains a clean but rugged OEM-style appearance * Trail-ready installation in approximately 3 hours * Order the kit recommended for your vehicle
Not Yet Reviewed
$554.99
—
$582.99
Set your engine free to breathe cool, dense air for increased horsepower and fuel economy normally restrained by your factory air box. Roush Mustang cold air intake kits increase horsepower, torque, and fuel mileage with improved throttle response. These Mustang cold air intake kits are much more efficient than stock. They feature a reusable filter element that traps the smallest particles and a cool air dam that surrounds the filter to keep hot air from the engine and further maximize performance. Roush Mustang cold air intake kits are easy to install; just grab your basic tools, and you're ready. For a legendary ride, go with the performance engineers at Roush.
( 20 )
$549.99
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$516.00
—
$780.00
aFe Momentum GT Red Edition cold air intake systems are not only engineered to outflow the factory intake for improved dyno-proven gains—their vibrant red color will also dress up your engine bay area too! Features and benefits: * One-piece sealed roto-molded housing is constructed of heat-resistant red XLPE (Cross-Linked polyethylene) polymer and features aFe patent-pending filter-to-housing interface * This system features high-quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit—and utilizes factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time * Featured red XLPE material is heat-soak resistant and extremely durable * An injection molded fitting is mounted on the tube to provide a perfect connection for the temperature sensor * 3-layer performance air filter has a massive oval flange with an inverted top Pro DRY S filter media—made of 3-layers of progressive finer porosity synthetic media to provide maximum convenience with 100 percent polyurethane frame for long life and multiple cleaning cycles * Pro Dry S air filter is washable and reusable for maximum convenience * Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available * Revolutionary design features patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system for simple installation—no cutting or drilling required
( 3 )
$516.00
—
$657.00
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$516.00
—
$808.00
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$516.00
—
$680.00
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$529.95
—
$649.95
Built for power and show, K&N 69 Series Typhoon cold air intake kits are engineered to dramatically reduce intake restriction, resulting in additional horsepower and torque. These air intake kits primarily feature a free-flowing, mandrel-bent aluminum tube induction system designed to fit many performance vehicles. The Typhoon kits come in one of three designs: cold air intakes, short ram intakes, or complete cold air intakes—which can be configured as either cold air or short ram intakes. Some air intake models feature high-quality tube and end cap finish options, including polished aluminum, and black, blue, red, or silver powdercoated, among other options. Order the K&N 69 Series Typhoon cold air intake kit that is suited to fit your vehicle application.
( 461 )
$524.99
—
$787.72
APR PEX intake systems are attractive high-performance upgrades designed to increase performance by letting the engine breathe more freely. Their closed airbox design rejects power-robbing heat from the engine bay thanks to the high-heat deflection material used, and it provides an unrestrictive path for cold, dense air fed from outside of the engine bay to maximize power. A high-flow, reusable filter provides excellent filtration without the restrictions, which keeps the engine clean while optimizing power delivery. APR PEX intake systems recorded a 31 percent cfm improvement over the factory airbox, which translates into a sharper throttle response, lessened strain on the turbocharger, and more horsepower and torque. Offering an excellent value, PEX systems install in minutes, looks fantastic, deliver a sporty engine note, and is recommended at all stages of performance.
Not Yet Reviewed
$549.95
—
$799.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
