Availability
Showing In Stock Items. Show All 15 Items.
On Sale
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$574.95
—
$719.95
$517.99
—
$647.99
Eliminate your restrictive factory air box, filter, and intake tube. In their place, install one of the Volant MaxFlow 5 closed box air intake kits. They house a MaxFlow 5 oiled cotton gauze air filter that is cleanable and reusable. As an enclosed system, the air intake keeps your engine quiet at cruising speeds, but still allows it to roar to life when you stomp on the gas. This design protects the filter and ensures that colder air is pulled in from the fender instead of the engine bay—resulting in more horsepower and torque. These intake units are factory-tuned, and everything you need for installation is included. Volant MaxFlow 5 air intake kits are available for fitment on a variety of makes and models.
( 171 )
$502.90
—
$629.90
On Sale
Roush 2015-17 Mustang 3.7L V6 Level 1 Performance Pacs are one of the easiest and most economical ways to achieve a power boost! These kits have been dyno-tested to add more than 12 hp and 13 lbs.-ft. of torque to your rear wheels. The industry-leading cold air intakes are designed to maximize the space in your engine bay. They're injection-molded units equipped with a high-flow, multi-layer filter—and the lower restriction rate means you'll never have to upgrade your intake. Level 1 Performance Pacs include calibrations engineered for aggressive throttle mapping, a sportier feel, and driving enhancements across the power band. These calibrations can be quickly programmed into your factory ECU using standard J2534 reflash interfaces and the accompanying Roush Diagnostic Tool utility. * An optional 3-year/36,000-mile Limited Powertrain Warranty is available.
Not Yet Reviewed
$760.99
$684.89
Momentum Pro 5R air intake systems from aFe are designed around a large pre-oiled 7.5 in. tall, oval, cotton media filter with five layers of progressively finer mesh to maximize performance. These incredible filters fit into equally impressive one-piece housings with auxiliary air scoops and large clear sight windows. When combined with the housings, these aFe air intake systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro 5R air intake systems.
( 12 )
$729.00
aFe Momentum Pro Dry S air intake systems are designed around large 7.5 in. tall, oil-free, 3-layer filters with progressively finer porosity synthetic media. Each of these incredible filters fit into an equally impressive one-piece housing with an auxiliary air scoop and a large clear sight window. When combined with the housing, these systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro Dry S air intake systems.
( 3 )
$729.00
Injen SP Series Speed Pro intake systems are developed for enthusiasts who demand the best. These units feature Injen's patent-pending MR Technology process for optimal gains and a safe air/fuel ratio. Speed Pro Series models do not limit themselves to just cold air intake or Short Ram systems—the MR Technology process has its effects on both types. The Speed Pro Series are the world's first bolt-on tuned intake systems designed specifically for your vehicle. The aluminum tubes are available in a variety of finishes; and the blue synthetic filters prevent particles from contaminating the engine..Hundreds of configurations are available; order the intake tailored for your application.
( 22 )
$503.92
—
$809.94
Injen PF Series Power-Flow intake systems are engineered to the highest standards, utilizing the latest technology available. Incorporating Injen's own patent-pending MR Technology, these cold air units are the world's first tuned intake systems on the market! They ensure the highest horsepower and torque gains within the safe factory air/fuel ratio limits. Power-Flow intakes deliver a blast of oxygen at the perfect moment for blazing combustion and gut-wrenching power output, placing your motor on a steady diet of colder, richer oxygen. The process starts with the high-flow air filter's integrated air inducer, air stabilizer, and velocity stack. Fresh air is drawn in, smoothed out, and then pressurized. From there, the oxygen flows through the Mega Ram-tuned pipe, where it's released to the mass airflow sensor at calculated intervals. Each kit goes through a rigorous dyno-testing process and is fine-tuned to unleash ferocious performance across the rpm spectrum. Injen Power-Flow intake systems bolt on without any drilling. Order the model designed for your vehicle application.
( 16 )
$501.78
—
$574.54
Motor Guard High Tech air preparation systems offer six stages of air prep in a single unit, and the most advanced system for spray booths and critical refinishing operations. Plus, these systems provide for the quickest, cleanest cartridge change in the industry. Motor Guard High Tech systems components: * Water trap and high-efficiency filter--a high-volume water trap combined with a particulate and oil filter that features Motor Guard's exclusive hydrophilic depth cartridge which filters to an incredible .01 micron rating. The cartridge was developed to trap oil, water, and particulates in between the tightly wound sheets of high-efficiency media. * Oil absorber and desiccant dryer--a unique cartridge that combines an activated carbon inner element to remove oil vapor to <.003 ppm with a high-capacity silica gel desiccant dryer that delivers an incredible -40 degrees F dew point to the spray booth. Two full quarts of silica gel desiccant beads ensure a long filter life and a color-change (blue to pink) sight glass signals the need to replace both cartridges. * Compressed air precision regulator--high-quality, true diaphragm regulator designed to set and hold outlet pressure over a wide range of flows and conditions. A high-visibility, multi-scale pressure gauge features a scratch- and solvent-proof glass lens.
Not Yet Reviewed
$664.99
Airflow is everything in a performance engine and naturally it begins with the air filter, but factory units are downright boxy and can be very restrictive. S&S Cycle tuned induction air cleaner kits utilize two laser-cut and highly engineered tubes merged into a single collector and fed by a pair of high-flow air filters placed directly in the airflow. They are crafted with stainless steel intake runners available in different finishes. The end result--maximum performance for your engine and a stylish package. Select the S&S Cycle tuned induction air cleaner designed for your Harley® model with the preferred finished. Features and benefits: * Bolt-on performance—over twice the filtering area over stock intake system * 44 percent increase in airflow * Smooth intake tract of carefully selected tuned lengths increases performance * High-flow washable and reusable cotton media filter elements provide performance, protection, and economy Note: Will not fit on motorcycles equipped with fairing lower glove boxes or twin-cooled models
Not Yet Reviewed
$675.95
—
$699.95
On Sale
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$649.95
$529.95
—
$583.95
On Sale
APR PEX intake systems are attractive high-performance upgrades designed to increase performance by letting the engine breathe more freely. Their closed airbox design rejects power-robbing heat from the engine bay thanks to the high-heat deflection material used, and it provides an unrestrictive path for cold, dense air fed from outside of the engine bay to maximize power. A high-flow, reusable filter provides excellent filtration without the restrictions, which keeps the engine clean while optimizing power delivery. APR PEX intake systems recorded a 31 percent cfm improvement over the factory airbox, which translates into a sharper throttle response, lessened strain on the turbocharger, and more horsepower and torque. Offering an excellent value, PEX systems install in minutes, looks fantastic, deliver a sporty engine note, and is recommended at all stages of performance.
Not Yet Reviewed
$799.95
$718.95
On Sale
APR carbon fiber intake systems let your engine breathe! The stunning carbon fiber design rejects power-robbing heat from your engine bay and efficiently delivers an unrestrictive path for cold, dense air fed from outside the engine bay. These systems use high-flow filters, providing excellent filtration without restrictions—prudently keeping the engine clean and optimizing power delivery. They dramatically outflow your stock intake, sharpening throttle response and lessening strain on the turbocharger. APR carbon fiber intake systems typically install in minutes, look fantastic, instantly deliver a sporty engine note, and are recommended for all stages of performance.
Not Yet Reviewed
$699.95
$538.95
—
$628.95
On Sale
APR open carbon fiber intake systems feature a beautiful carbon fiber air dam that directs fresh air into a massively oversized 7 in. cotton filter with frontal inlet. They include thick T304 stainless steel heat shields and air buffer gaps on the back of the carbon fiber shell to reject heat from the engine bay. Doing away with the airbox completely solves the dramatically undersized, power-robbing inlet restriction that's glaringly apparent at higher horsepower levels on the factory system. The 4 in. inlet is compatible with the factory inlet or the upgraded APR Ultracharger System, and efficiently creates an uninterrupted airflow path into the supercharger for maximum results. APR open carbon fiber intake systems are the ultimate air intake solution for your 3.0 TFSI. Features, items, and specs: * Drop-in open system installs in minutes * Flow bench gains up to 268 cfm at 28 in. of water column over stock * Average of 17 AWHP at stage 2+ (93 octane) more than factory system * Extremely precise fitment * Massive airflow improvements * 502 total cfm at 28 in. of H2O stock * SAI breather filter * Billet aluminum mounting feet * Billet aluminum 4 in. flange adapter
( 1 )
$549.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
