Availability
Showing In Stock Items. Show All 18 Items.
K&N elevated intake snorkel kits are built to deliver added protection and confidence when heading off-road and into extreme environments. These systems help ensure a consistent supply of cleaner air to your engine, especially in dusty, sandy, or debris-heavy conditions. By relocating the air inlet to the vehicle's highest point, K&N snorkels help preserve airflow, enhance induction tone, and reduce the risk of water ingestion (not rated for complete water submersion). The one-piece, roto-molded construction offers a durable, integrated appearance and is designed to fit either the factory, K&N, or Airaid cold air intake system (see vehicle-specific fitment details). K&N snorkels are engineered to enhance your vehicle's off-road capability and performance without compromising style. * Helps prevent ingestion of dirt, debris, water * Maintains a clean but rugged OEM-style appearance * Trail-ready installation in approximately 3 hours * Order the kit recommended for your vehicle
Not Yet Reviewed
$589.99
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$524.99
Injen Evolution Series cold air intake kits will deliver impressive fuel economy, horsepower, and torque gains. They incorporate either a massive SuperNano-Web dry air filter or 8-layer oiled cotton gauze air filter--both fully serviceable--to keep clean air moving. These intakes feature sleek design lines for unmatched looks under your hood—and they drop into the original mounting points for a direct fit replacement. These systems come ready to install, complete with stainless steel hardware and automotive-grade hose couplers. Order the model designed for your vehicle application. Features: * Durable roto-molded polyethylene construction * Stainless steel band clamps with inner protective liner * Reinforced automotive-grade silicone couplers
( 18 )
$810.55
APR PEX intake systems are attractive high-performance upgrades designed to increase performance by letting the engine breathe more freely. Their closed airbox design rejects power-robbing heat from the engine bay thanks to the high-heat deflection material used, and it provides an unrestrictive path for cold, dense air fed from outside of the engine bay to maximize power. A high-flow, reusable filter provides excellent filtration without the restrictions, which keeps the engine clean while optimizing power delivery. APR PEX intake systems recorded a 31 percent cfm improvement over the factory airbox, which translates into a sharper throttle response, lessened strain on the turbocharger, and more horsepower and torque. Offering an excellent value, PEX systems install in minutes, looks fantastic, deliver a sporty engine note, and is recommended at all stages of performance.
Not Yet Reviewed
$549.95
—
$799.95
On Sale
APR carbon fiber intake systems let your engine breathe! The stunning carbon fiber design rejects power-robbing heat from your engine bay and efficiently delivers an unrestrictive path for cold, dense air fed from outside the engine bay. These systems use high-flow filters, providing excellent filtration without restrictions—prudently keeping the engine clean and optimizing power delivery. They dramatically outflow your stock intake, sharpening throttle response and lessening strain on the turbocharger. APR carbon fiber intake systems typically install in minutes, look fantastic, instantly deliver a sporty engine note, and are recommended for all stages of performance.
Not Yet Reviewed
$1,099.95
$535.95
—
$699.95
BladeRunner intake manifolds from aFe Power provide smooth and direct airflow for minimal pressure loss and maximum CFM gains. How do they do it? With innovative MDV technology that uses smooth bends and directional vanes to form multiple paths through the manifold. These paths are smoother and shorter, producing much smaller dead air zones, for increased overall airflow to the engine. You can also expect faster turbo spool-up, improved boost pressure, and an increase in horsepower and torque! BladeRunners are available in configurations for a wide range of vehicles from the 1990s and up. Additional features include: * Proprietary internal bolt design guaranteed not to deform or leak * Cast A356-T6 aluminum construction * Up to 5 port pads (depending on application) threaded for 1/8 in. NPT * Stainless steel hardware
( 5 )
$561.75
On Sale
COBB Tuning SF Intake systems remove a pre-turbo restriction in the stock intake system. They provide great power gains when combined with custom mapping on your Accessport tuner. To maintain optimal air flow, SF Intake systems utilize several unique features such as a custom conical cloth air-filter element and a computational fluid dynamics (CFD)-designed velocity stack. Tuned or stock, with the addition of a SF Intake system turbocharger induction noise and bypass valve venting sounds are much more audible. COBB Tuning SF Intakes were designed to be easy to install without having to modify your car. Installation requires no cutting or trimming of any components and can be completed with simple hand tools. Simply remove the stock air box and bolt the SF intake into place in just minutes. Additional attributes of COBB Tuning SF Intake systems (varies by model): * Temperature-resistant composite construction; saving weight and reducing heat transfer * Integrated velocity stack * Integrated airflow straighteners * 4-ply steel-reinforced silicone post-MAF tubing (where applicable) * Pre-oiled, cleanable, reusable, custom filter element * Air boxes are available for most applications (sold separately) * COBB Tuning off-the-shelf (OTS) maps for the Accessport make SF Intake installs easy: bolt it in, flash, and go IMPORTANT NOTE: Some SF Intakes REQUIRE tuning to ensure the MAF sensor reads properly and the engine operates within safe parameters. Check your application carefully.
( 3 )
$575.00
—
$765.00
$517.50
—
$688.50
Volant Primo closed box air intake kits offer the best in filtration and performance for your diesel pickup. With a specially engineered filter box, these intake systems will be insulated from the hot air in your engine compartment. The air ducts are designed for less restriction and a smooth transition for filtered air to reach your turbo. This allows for maximum horsepower and incredible throttle response. Stainless steel hardware, coupled with durable silicone connectors, will ensure the intake system lasts the lifetime of your truck. Included in these kits, the Volant Primo air filter adds the best filtration possible without sacrificing airflow. The efficiency on this media was also tested through ISO standard and destroyed the dry filtration filters. This combination of features has opened up Volant and your truck to the next level. Order the kit recommended for your vehicle.
( 7 )
$644.90
On Sale
The AMS Performance MQB Carbon Fiber intake upgrade was designed to draw a higher volume of cold air into the stock turbocharger. AMS has selected a motorsports-grade carbon fiber that's both hand-laid and high temperature-resistant. Other options on the market use the typical gloss clearcoated carbon fiber prone to discoloration and cracking. AMS MQB intake kits use three layers of 1mm twill weave pre-preg carbon fiber capable of sustaining a 240 degree C temperature threshold, while maintaining structural integrity and aesthetic appearance—with no worry of fading or yellowing over time. These intakes also eliminate the engine bay vents found on the factory intake. Vents often allow the OEM car to pull in hot engine bay air for startup and fuel consumption requirements to the detriment of performance. By opening up the entire front grill and eliminating these warm air vents, 100 percent of the airflow is cold air brought in from the front grill of the car. Order the model recommended for your application.
Not Yet Reviewed
$699.95
$594.96
Draw your vehicle's engine into the world of respiratory refinement with AWE Tuning intakes. AWE Tuning AirGate air intakes are constructed of genuine 2 x 2 carbon fiber with a UV-stabilized resin and clearcoat, and they mount securely to the stock/factory location, integrating with the factory ducting/air inlets seamlessly. With AWE's AirGate you can run it with the lid on or off via easily accessible hex screws. Want to hear more turbo inductions sounds from within the cabin? Go lidless. Prefer to keep it stealthy? Simply bolt the AirGate lid in place. Complementing the carbon fiber airbox is AWE's durable and washable S-FLO filter designed to ensure easy service and maximized airflow, unlocking increased horsepower and torque gains, while delivering an intoxicating sound. AWE Tuning AirGate air intakes for the MQB platforms are available with or without lid. Choose the preferred AWE intake designed for your vehicle.
Not Yet Reviewed
$720.00
aFe Magnum Force Pro Dry S Stage 2 Si air intake systems feed your engine clean, cool air—and lots of it! These systems feature fully sealed intake housings that keep out warm air under the hood and bring in cooler outside air for a denser intake charge. They're fitted with a heat-insulating molded plastic intake tube and a unique turbo adapter that funnels air into the turbo for improved volumetric efficiency and maximum performance, while lowering intake air temperatures. And, keeping the air clean is the patented 360 degree Pro Dry S performance cone filter. With three layers of fine mesh synthetic oil-free media and polyurethane construction, these conical filters will last a long time and through multiple cleaning cycles. Assembly and installation are easy, as these systems use factory mounting points. Flow maximum oxygen to your engine with these Magnum Force Pro Dry S Stage 2 Si air intake systems from aFe.
( 3 )
$729.00
Get the most out of your diesel truck performance with aFe BladeRunner intercooler pipes. The connecting arms are fully mandrel-bent stainless steel or aluminum tubing that will outflow factory pipes, giving you more power and fuel efficiency. The intercooler pipes free-flowing design aids in decreasing EGTs to help protect your motor from power-robbing heat. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system. The kits come complete with the hardware needed for installation, and a powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes!
( 18 )
$622.65
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$613.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
