Availability
On Sale
Holley Terminator EFI fuel system plumbing kits provide everything needed for a complete supply fuel system for the Terminator EFI self-tuning engine management system. They are engineered using Holley electric fuel pumps, fuel pressure regulators, and fuel filters, coupled with quality Earl's hose, to provide a fuel system tailored to the needs of your Terminator EFI system. The systems are available with different fuel pumps and types of fuel hose, so you can choose what best fits your application. All Holley Terminator EFI fuel system plumbing kits feature quality Earl's anodized aluminum fittings to get the job done and look good, too.
( 10 )
$725.95
$652.95
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
$673.95
On Sale
The amazing HydraMat fuel pickups feature Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks, as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. The Holley HydraMat fuel pickups are the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. Holley HydraMats are available in various sizes and shapes to fit a wide variety of stock fuel tanks and/or race fuel cells. Features and benefits: * Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells * Greatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and/or engine stalling * Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions * Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells * Not for use with diesel fuels
( 64 )
$983.95
—
$1,049.95
$639.95
—
$682.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
—
$899.95
$584.95
—
$718.95
On Sale
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$749.95
$673.95
On Sale
Make Holley SBF Hi-Ram EFI intake manifold bases the foundation for your custom induction system. Their modular design allows them to accept a variety of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. Aggressive looks and bold styling make your bad intentions clear—whether you're drag racing, truck pulling, or making waves in your boat—when you start with the Holley Hi-Ram EFI intake manifold bases. SBF Hi-Ram EFI intake manifold base features and specs: * Manifold base only designed for 8.2 in. deck height * Cast aluminum construction * Available in natural cast aluminum (satin) or black powdercoat finish * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system
( 1 )
$996.95
—
$1,049.95
$648.95
—
$682.95
On Sale
Holley 450 lph fuel pump modules feature billet pump flanges that connect to either single or dual 450 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 450 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
( 2 )
$723.95
$650.95
On Sale
Holley 340 lph fuel pump modules feature billet pump flanges that connect to either single or dual 340 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 340 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
Not Yet Reviewed
$649.95
$583.95
On Sale
Holley Sniper EFI fabricated Race Series intake manifolds utilize a larger intake plenum for max effort engines and boosted applications. These manifolds feature 5mm (13/64 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. With their removable tapered top, increased velocity and more evenly distributed airflow to all cylinders is a guarantee! Race Series intakes also include 3/8 in. fuel rail kits, -8 AN fittings, and crossover-braided line capable of supporting 750+ hp. They're available in multiple anodized colors, and every manifold has the Holley Sniper EFI logo.
( 1 )
$1,449.95
$797.95
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$649.95
—
$675.95
$583.95
—
$607.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
