Availability
Showing In Stock Items. Show All 34 Items.
Morso oil pump primers are critical when building a new engine. Priming the engine is an important precautionary measure that should be taken before you start the engine for the first time. Moroso oil pump primers are made from high-strength steel with a durable finish. The portions of the engines primed will vary by make and model. Please see notes and applications for exact specifications as some models may not fully prime the engine.
( 16 )
$51.99
These Sealed Power oil pump pickups are designed for use with your stock or Sealed Power oil pump. They will fit the stock pan and are engineered to stock specs for a perfect fit every time.
( 35 )
$74.99
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
Carter inline electric fuel pumps are quality replacements to deliver fuel at the precise pressure and flow rate your vehicle demands. With a low amp draw, high free-flow, and consistent fuel pressure, these pumps will keep your engine well-fed. Universal and vehicle-specific models are available.
( 80 )
$51.99
Tanks Inc. fuel pump safety switch and relay wiring kits are helpful when you're switching to an electric pump on a carbureted engine. Proper wiring is crucial to the performance and longevity of your fuel pump. Make sure that your fuel pump is receiving full voltage from the battery with this heavy-duty kit. It will provide a continuous supply of voltage to prevent drop-off that's common with OE wiring—which will protect your fuel pump from damage. Additionally these FPSSK kits feature an oil pressure safety switch to turn off the fuel pump in the event of oil pressure loss. Without a safety switch your fuel pump will continue to run, even if a fuel line comes loose or in the case of an accident. Once oil pressure is lost, this kit will turn off the power to the pump. Included with the Model FPSSK kit: * 50 amp relay with socket and pigtail * 30 amp circuit breaker * 15 ft. of 12-gauge fuel pump power wire * 5 ft. of 12-gauge relay power wire * 5 ft. of 14-gauge relay ground and trigger wire * 10 ft. of 16-gauge starter wire * 10 ft. of 16-gauge ignition wire * 1/8 in. NPT male to 1/8 in. NPT female brass tee fitting * 3-prong oil pressure safety switch * Includes terminals and mounting hardware
( 4 )
$69.99
Tera Pump utility jug fuel transfer pumps deliver a flow rate of 2.4 gpm, with an auto-stop overfill system. They include water-resistant power buttons and battery cover in case of accidental spills. Now you can easily refuel boats, ATVs, motorcycles, cars, generators, lawn mowers, and more. Each pump includes a 4-pack of adapters, compatible with utility jugs, racing jugs, VP Racing, Mr. Gasket, Midwest Can, No-Spill Can, Scepter, Briggs & Stratton, and Garage Boss (does not include gas can and does not fit FMD gas cans). Pumps work with any non-corrosive liquids such as gasoline, diesel, non-potable water, kerosene, or light oils. NOT compatible with thinners, solvents, hot liquids, acetone, benzene, cresol, etc.
( 1 )
$87.99
Dorman engine oil accumulator solenoid valves are made from durable materials for reliable performance. Oil pump flow control valves often fail from varnish build-up, and the original manufacturer requires replacing the entire oil pump assembly. These Dorman oil pump flow control valves are quality replacements for a clogged or damaged original equipment control valve and are an excellent value compared to the original equipment part.
Not Yet Reviewed
$59.95
VDO oil pressure safety switches are designed to sense when oil pressure drops below a specific minimum pressure—and shut-off the fuel pump for precaution. The heavy-duty replacement switches are available in a variety of pressure ranges. Select the model best suited for your application.
Not Yet Reviewed
$54.99
Lucas R&O Hydraulic Oils are formulated with the highest quality paraffinic base oils to provide excellent rust, corrosion and oxidation protection. Its excellent demulsibility allows the product to separate from water quickly; and effective foam inhibitors prevent it from foaming. This lubricant is designed for use in air compressors and hydraulic systems operating under 1,000 psi that do not require anti-wear additives. General-purpose applications include plain and anti-friction bearings, vacuum pumps, electric motors as well as centrifugal, turbine and deep well pumps. Lucas R&O 46 (20 wt.) virgin hydraulic oil is available in multiple sizes.
( 2 )
$67.99
Lucas R&O virgin hydraulic oils provide excellent rust, corrosion and oxidation protection. Their excellent demulsibility allows each product to separate from water quickly. They're designed for use in air compressors and hydraulic systems operating under 1,000 psi that do not require anti-wear additives. The oils also have applications in plain and anti-friction bearings, vacuum pumps, electric motors, as well as centrifugal, turbine and deep well pumps. Additional details: * Minimizes foam * Available in multiple sizes
Not Yet Reviewed
$67.99
When it comes to replacing critical electronic equipment for your vehicle, like oil pressure sending units, don't trust aftermarket suppliers to get it right—rely on the ACDelco line of electronics. They offer various sensors, relays, and switches built to match factory parts in fit, form, and function. These oil pressure sending units will work with your vehicle's ECM to provide optimal performance. They're available in a variety of styles for fitment on vehicles from the 1960s and up. Order the model recommended for your application.
( 17 )
$62.99
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$89.35
—
$90.85
It's always a good idea to place a safety switch in the circuit when installing an electric fuel pump. Holley safety fuel pressure switches will ensure the electric pump will not work unless the engine has oil pressure. It will prevent the pump from running in a situation where the motor may stall with the ignition on. Wiring the switch through the starter solenoid circuit energizes the pump on engine start-up. After the engine is running, the switch continues to provide power to the pump as long as there is oil pressure to keep the switch turned on.
( 18 )
$53.49
Howards Cams distributor gears are available in a variety of materials, styles, and diameters—machined to exacting tolerances. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps. Order the model recommended for your year/make and engine application.
( 25 )
$52.99
—
$87.99
Don't ruin your new steel roller cam by running the wrong distributor gear. Install one of these quality bronze distributor gears from COMP Cams. A stock cast iron gear is not compatible with a steel camshaft and can cause serious damage. These bronze gears are machined from AMPCO-45 extruded aluminum bronze with 5 percent nickel. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps.
( 39 )
$74.95
—
$96.95
Clearance
Keep your EMAX air compressor running at peak performance with an EMAX extended warranty kit. See guidelines and options listed below: Piston Air Compressors 1-Year Standard Warranty: EMAX standard warranty ensures compressor unit is free from defects in material, provides workmanship, and the delivery of replacement parts for 1-year from the date of initial product delivery—standard warranty includes 1-year of warranty labor from an authorized technician (parts shipped for warranty repairs, include ground freight charges for the first 90 days of the warranty period) 5-Year Extended Warranty: Kit must be purchased 2 times per year—EMAX will extend your standard 1-year warranty to full 5 years when you opt to register for the extended warranty plan that includes using our SMART OIL and following all routine maintenance set forth (parts shipped for warranty repairs, include ground freight charges for the first 90 days of the warranty period) Lifetime Pump Warranty: Kit must be purchased 2 times per year—with participation in EMAX SMART OIL extended auto ship program EMAX will extend your warranty plan to Lifetime Pump Warranty on the pressure lubricated pump (All other non-wear components are extended to 10 years) Warranty repair parts under the Lifetime warranty will not include any shipping charges beyond the Standard Warranty. This plan includes our advanced technical air support. Smart Tech Support provides you with the highest level of technical support. Smart Tech support is an interactive support team available to you at your fingertips by just downloading a free app. The app provides free remote meetings, interactive touch display, and real live personal to assist. The Lifetime Pump Warranty is not prorated and has no hour limits. Rotary Screw Air Compressor: 1-Year Standard: EMAX standard warranty ensures that each rotary screw air compressor be free from defects in materials & workmanship for 1 Year from the date of delivery, this includes the rotary screw compressor air-end and all components including the electric motor. The Standard Warranty includes 1-year of warranty labor from an authorized technician (parts shipped for warranty repairs, include ground freight charges for the first 90 days of the warranty period) 10-Year Extended Warranty: EMAX Compressor will extend your standard 1-year warranty to 10 years on the rotary screw compressor air-end and 10 years on a three-phase electric motor, or 5 years on a single-phase motor. When the owner opts into the extended warranty plan, EMAX Compressor extends all other components to 5 years. Warranty repair parts under the extended warranty will not include any shipping charges beyond the standard warranty—this plan includes EMAX advanced technical air support. Lifetime Air-end Warranty: With participation in EMAX SMART WHISPER BLUE OIL auto ship program EMAX Compressor will extend the warranty plan to a Lifetime Warranty on the rotary screw compressor air-end and the Extended Warranty of 10 years on a three phase electric motor, or 5 years on a single phase motor and all other components for 5 years will be included. Warranty repair parts under the Lifetime warranty will not include any shipping charges beyond the Standard Warranty, therefore the owner is responsible for all freight charges for warranty parts. This plan includes EMAX advanced technical air support. Smart Tech Support provides you with the highest level of technical support. Smart Tech support is an interactive support team available to you at your fingertips by just downloading a free app. The app provides free remote meetings, interactive touch display, and real live personal to assist. The lifetime warranty is not prorated and has no hour limits.
Not Yet Reviewed
$89.99
$62.50
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. These Dorman camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Dorman camshaft position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Dorman.
( 16 )
$69.95
Sealed Power engine products are a complete system of application-engineered replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. Sealed Power connecting rod bearings are available with different linings to meet every engine's needs. They're made using either tri-metal or aluminum bi-metal construction for the utmost in performance and durability for all stock rebuilds and mild performance applications. Tri-metal alloys feature a steel base coated with a sintered layer of copper-lead alloy, followed by layers of electro-plated nickel and babbit to produce the ultimate bearings. Bi-metal aluminum types carry all of the same features without the babbit, as specified by many of today's top engine builders. Sealed Power bearings are available for a multitude of engines in sizes ranging from standard to 0.060 in. oversized.
( 8 )
$54.99
Top TEC ATF 1200 fully synthetic automatic transmission fluid with modern additive technology provides high thermal stability, excellent wear protection, and correct friction behavior. With an excellent low-temperature behavior, this product provides compatibility with most common seal materials. Liqui Moly designed Top Tec 1200 ATF for automatic and manual transmissions, power steering systems, and hydraulics in automotive and commercial vehicles that require (or recommend) an ATF fluid meeting this product's specifications.
( 1 )
$69.99
When you need to make automotive repairs, ACDelco's selection of replacement wiring harness connectors offers you the best fit and function sockets and pigtails to do a variety of jobs. These quality-built, OE-like connectors and adapters provide you with efficient, less costly repair options for GM and American Motors vehicles. They're available in male or female, with an assortment of pins/cavities to fill your needs. Service your vehicle with a name you know and trust--ACDelco.
( 22 )
$51.99
On Sale
Dinan replacement air filters are premium high-flow units available in several styles to fit their intakes, air boxes, and air pumps. All are made from quality cotton gauze, providing unrestricted airflow.
( 2 )
$59.95
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$63.99
Summit Bucks
Fel-Pro conversion set gaskets are ideal for stock rebuilds or street-driven cars and trucks. They include every seal necessary for lower engine work. When combined with a Fel-Pro head set, conversion sets can be used for a complete overhaul. Order the gaskets designed for fitment with your engine type and designation.
( 81 )
$78.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
